Introduction to Calculus: AQA Level 2 Further Maths
Revise AQA Level 2 Further Maths calculus with differentiation rules, tangents, normals, stationary points, worked examples and exam questions.
An introduction to calculus Level 2 Further Maths guide begins with one central idea: differentiation finds the gradient of a curve. For AQA Level 2 Further Mathematics, you must use differentiation to calculate gradients, find equations of tangents and normals, identify stationary points, classify maxima and minima, and solve simple optimisation problems.
This guide explains those skills step by step. It includes introduction to calculus worked examples, common mistakes and exam-style questions pitched at AQA Level 2 Further Maths. Calculus is not part of every GCSE Maths course, so you may also find it useful to compare the GCSE Maths topics taught by exam board and tier.
What is calculus?
Calculus studies quantities that change. At this level, the relevant branch is differential calculus, usually shortened to differentiation.
The gradient of a straight line is constant, but the gradient of a curve normally changes from point to point. Differentiation turns the equation of a curve into a new expression called its gradient function or derivative. This gives the exact gradient at any point on the curve.
If yyy is a function of xxx, its derivative may be written as:
dydx \frac{dy}{dx} dxdyThis notation represents the rate of change of yyy with respect to xxx. It does not usually mean that dydydy and dxdxdx should be treated as separate numbers.
AQA Level 2 Further Mathematics introduces differentiation but not integration. The qualification is untiered, so every student can be assessed on the same calculus content.
The differentiation rule
For a term of the form axnax^naxn, where aaa is a constant and nnn is a positive integer, use the power rule:
ddx(axn)=anxn−1 \frac{d}{dx}(ax^n)=anx^{n-1} dxd(axn)=anxn−1In practical terms:
- Multiply the coefficient by the power.
- Reduce the power by 111.
For example:
5x4⟶20x3 5x^4 \longrightarrow 20x^3 5x4⟶20x3A constant differentiates to zero because its value does not change as xxx changes:
ddx(7)=0 \frac{d}{dx}(7)=0 dxd(7)=0Differentiate each term separately when an expression contains several terms.
Worked example 1: Differentiating a polynomial
Differentiate:
y=4x3−5x2+6x−9 y=4x^3-5x^2+6x-9 y=4x3−5x2+6x−9Apply the power rule to each term:
dydx=12x2−10x+6 \frac{dy}{dx}=12x^2-10x+6 dxdy=12x2−10x+6The constant −9-9−9 disappears. Notice that 6x6x6x becomes 666, since
ddx(6x)=6x0=6. \frac{d}{dx}(6x)=6x^0=6. dxd(6x)=6x0=6.A useful check is that differentiating a polynomial normally reduces its degree by one. A cubic function should therefore produce a quadratic derivative.
Finding the gradient at a point
The derivative is a formula for the gradient at any value of xxx. To find the gradient at a particular point, differentiate first and then substitute its xxx-coordinate into the derivative.
Worked example 2: Gradient at a given point
The curve has equation
y=2x3−3x2+4. y=2x^3-3x^2+4. y=2x3−3x2+4.Find its gradient when x=2x=2x=2.
Differentiate:
dydx=6x2−6x. \frac{dy}{dx}=6x^2-6x. dxdy=6x2−6x.Substitute x=2x=2x=2:
dydx=6(2)2−6(2)=24−12=12. \frac{dy}{dx}=6(2)^2-6(2)=24-12=12. dxdy=6(2)2−6(2)=24−12=12.The gradient of the curve at x=2x=2x=2 is therefore 121212.
Do not substitute x=2x=2x=2 into the original function when looking for the gradient. That calculation gives the yyy-coordinate, not the gradient.
Equations of tangents and normals
A tangent is a straight line that has the same gradient as the curve at the point where it touches. A normal is perpendicular to the tangent at that point.
For perpendicular non-vertical lines, the gradients satisfy:
mnormal=−1mtangent. m_{\text{normal}}=-\frac{1}{m_{\text{tangent}}}. mnormal=−mtangent1.Once you know a point (x1,y1)(x_1,y_1)(x1,y1) and a gradient mmm, use:
y−y1=m(x−x1). y-y_1=m(x-x_1). y−y1=m(x−x1).Worked example 3: Tangent to a curve
Find the equation of the tangent to
y=x2+3x−1 y=x^2+3x-1 y=x2+3x−1at the point where x=2x=2x=2.
First find the point on the curve:
y=(2)2+3(2)−1=9. y=(2)^2+3(2)-1=9. y=(2)2+3(2)−1=9.The point is (2,9)(2,9)(2,9). Differentiate the curve:
dydx=2x+3. \frac{dy}{dx}=2x+3. dxdy=2x+3.At x=2x=2x=2, the tangent's gradient is
m=2(2)+3=7. m=2(2)+3=7. m=2(2)+3=7.Use the straight-line formula:
y−9=7(x−2). y-9=7(x-2). y−9=7(x−2).Simplifying gives
y=7x−5. y=7x-5. y=7x−5.If the normal were required, its gradient would be −17-\frac{1}{7}−71, and its equation would pass through the same point (2,9)(2,9)(2,9).
Stationary points
A stationary point is a point where the gradient is zero. To find stationary points, solve:
dydx=0. \frac{dy}{dx}=0. dxdy=0.This gives the xxx-coordinates. Substitute each value back into the original equation to find the corresponding yyy-coordinate.
A stationary point can be a local maximum, a local minimum or, for some functions, a stationary point of inflection. In the standard Level 2 Further Maths questions, you will often classify a stationary point by using the second derivative.
The second derivative
Differentiating the gradient function produces the second derivative:
d2ydx2. \frac{d^2y}{dx^2}. dx2d2y.At a stationary point:
| Value of the second derivative | Classification |
|---|---|
| d2ydx2>0\frac{d^2y}{dx^2}>0dx2d2y>0 | Local minimum |
| d2ydx2<0\frac{d^2y}{dx^2}<0dx2d2y<0 | Local maximum |
| d2ydx2=0\frac{d^2y}{dx^2}=0dx2d2y=0 | Test is inconclusive |
A positive second derivative means the gradient is increasing, producing a minimum-shaped curve. A negative second derivative means the gradient is decreasing, producing a maximum-shaped curve.
Worked example 4: Finding and classifying stationary points
Find and classify the stationary points of
y=x3−3x2−9x+5. y=x^3-3x^2-9x+5. y=x3−3x2−9x+5.Differentiate:
dydx=3x2−6x−9. \frac{dy}{dx}=3x^2-6x-9. dxdy=3x2−6x−9.At stationary points:
3x2−6x−9=0. 3x^2-6x-9=0. 3x2−6x−9=0.Divide by 333 and factorise:
x2−2x−3=0, x^2-2x-3=0, x2−2x−3=0, (x−3)(x+1)=0. (x-3)(x+1)=0. (x−3)(x+1)=0.Therefore, x=3x=3x=3 or x=−1x=-1x=−1.
Find the corresponding yyy-coordinates using the original function:
y(3)=27−27−27+5=−22, y(3)=27-27-27+5=-22, y(3)=27−27−27+5=−22, y(−1)=−1−3+9+5=10. y(-1)=-1-3+9+5=10. y(−1)=−1−3+9+5=10.The stationary points are (3,−22)(3,-22)(3,−22) and (−1,10)(-1,10)(−1,10).
Differentiate again:
d2ydx2=6x−6. \frac{d^2y}{dx^2}=6x-6. dx2d2y=6x−6.At x=3x=3x=3:
6(3)−6=12>0, 6(3)-6=12>0, 6(3)−6=12>0,so (3,−22)(3,-22)(3,−22) is a local minimum.
At x=−1x=-1x=−1:
6(−1)−6=−12<0, 6(-1)-6=-12<0, 6(−1)−6=−12<0,so (−1,10)(-1,10)(−1,10) is a local maximum.
Increasing and decreasing functions
The sign of the first derivative describes the behaviour of a function:
- If dydx>0\frac{dy}{dx}>0dxdy>0, the function is increasing.
- If dydx<0\frac{dy}{dx}<0dxdy<0, the function is decreasing.
- If dydx=0\frac{dy}{dx}=0dxdy=0, the function is stationary at that value of xxx.
For the function in Worked Example 4, the stationary values are x=−1x=-1x=−1 and x=3x=3x=3. Its derivative is positive before −1-1−1, negative between −1-1−1 and 333, and positive after 333. The curve therefore increases, decreases and then increases again, which agrees with the maximum and minimum already found.
This information can also help you sketch a polynomial curve. Include intercepts where required, plot stationary points accurately and show the correct increasing or decreasing behaviour between them.
Optimisation with calculus
An optimisation problem asks for a maximum or minimum value. AQA questions may involve an area, volume or another quantity expressed as a function of one variable.
The usual method is:
- Write the quantity being optimised as a function of one variable.
- Differentiate the function.
- Set the derivative equal to zero.
- Solve for the variable.
- Confirm whether the result is a maximum or minimum.
- State the requested value with appropriate units.
Worked example 5: Maximum area
A rectangle has perimeter 404040 cm. Its width is xxx cm. Find the dimensions that give its maximum area.
If its length is lll, then
2l+2x=40, 2l+2x=40, 2l+2x=40,so
l=20−x. l=20-x. l=20−x.The area is
A=x(20−x)=20x−x2. A=x(20-x)=20x-x^2. A=x(20−x)=20x−x2.Differentiate:
dAdx=20−2x. \frac{dA}{dx}=20-2x. dxdA=20−2x.At a stationary point:
20−2x=0, 20-2x=0, 20−2x=0,so x=10x=10x=10.
The second derivative is
d2Adx2=−2. \frac{d^2A}{dx^2}=-2. dx2d2A=−2.As this is negative, the stationary point is a maximum. The length is also 20−10=1020-10=1020−10=10 cm, so the maximum-area rectangle is 101010 cm by 101010 cm. Its maximum area is 100100100 cm2^22.
Common mistakes in calculus questions
Changing the coefficient but not the power
For 3x43x^43x4, the derivative is 12x312x^312x3, not 12x412x^412x4. Multiply by the original power and then subtract one from that power.
Keeping a constant in the derivative
The derivative of a constant is zero. For example, the derivative of x2+8x^2+8x2+8 is 2x2x2x, not 2x+82x+82x+8.
Using the original function to find a gradient
Substituting into y=f(x)y=f(x)y=f(x) gives a coordinate. Substituting into dydx\frac{dy}{dx}dxdy gives a gradient.
Forgetting the point when finding a tangent
The gradient alone is not an equation. Find the point of contact and use y−y1=m(x−x1)y-y_1=m(x-x_1)y−y1=m(x−x1).
Using the same gradient for a normal
The normal's gradient is the negative reciprocal of the tangent's gradient. A tangent gradient of 444 gives a normal gradient of −14-\frac14−41.
Finding only the stationary xxx-coordinate
A stationary point is a coordinate pair. After solving dydx=0\frac{dy}{dx}=0dxdy=0, substitute into the original function to find yyy.
Classifying with the wrong derivative
Use the first derivative to locate stationary points. Use the second derivative to classify them. The signs +++ and −-− in the second derivative test refer to the value of d2ydx2\frac{d^2y}{dx^2}dx2d2y at the stationary point.
Introduction to calculus exam questions
Embedded exam-style question
The curve CCC has equation
y=x3−6x2+9x+4. y=x^3-6x^2+9x+4. y=x3−6x2+9x+4.(a) Find dydx\frac{dy}{dx}dxdy.
(b) Find the coordinates of both stationary points.
(c) Classify each stationary point.
Answer
(a)
dydx=3x2−12x+9. \frac{dy}{dx}=3x^2-12x+9. dxdy=3x2−12x+9.(b) Set the derivative equal to zero:
3x2−12x+9=0, 3x^2-12x+9=0, 3x2−12x+9=0, x2−4x+3=0, x^2-4x+3=0, x2−4x+3=0, (x−1)(x−3)=0. (x-1)(x-3)=0. (x−1)(x−3)=0.Therefore, x=1x=1x=1 or x=3x=3x=3.
y(1)=1−6+9+4=8, y(1)=1-6+9+4=8, y(1)=1−6+9+4=8, y(3)=27−54+27+4=4. y(3)=27-54+27+4=4. y(3)=27−54+27+4=4.The stationary points are (1,8)(1,8)(1,8) and (3,4)(3,4)(3,4).
(c)
d2ydx2=6x−12. \frac{d^2y}{dx^2}=6x-12. dx2d2y=6x−12.At x=1x=1x=1, the second derivative is −6-6−6, so (1,8)(1,8)(1,8) is a local maximum. At x=3x=3x=3, it is 666, so (3,4)(3,4)(3,4) is a local minimum.
Try 4 more by using the MathsGenie practice-question method to create and check four further differentiation questions.
Further quick practice
- Differentiate y=7x4−2x3+5x−6y=7x^4-2x^3+5x-6y=7x4−2x3+5x−6.
- Find the gradient of y=3x2−4x+1y=3x^2-4x+1y=3x2−4x+1 when x=5x=5x=5.
- Find the equation of the tangent to y=x2−2x+3y=x^2-2x+3y=x2−2x+3 at x=3x=3x=3.
- Find and classify the stationary point of y=2x2−8x+7y=2x^2-8x+7y=2x2−8x+7.
Answers
- dydx=28x3−6x2+5\frac{dy}{dx}=28x^3-6x^2+5dxdy=28x3−6x2+5.
- dydx=6x−4\frac{dy}{dx}=6x-4dxdy=6x−4, so the gradient is 262626.
- The point is (3,6)(3,6)(3,6) and the gradient is 444, so y=4x−6y=4x-6y=4x−6.
- The stationary point is (2,−1)(2,-1)(2,−1). Since d2ydx2=4>0\frac{d^2y}{dx^2}=4>0dx2d2y=4>0, it is a minimum.
How to revise introduction to calculus Level 2 Further Maths
Begin by making differentiation automatic. Practise polynomials until you can differentiate each term accurately without confusing the original function and its derivative.
Next, combine differentiation with existing algebra skills. Stationary-point questions depend on factorising or solving quadratics, while tangent and normal questions depend on straight-line equations. If calculus errors persist, check whether the real difficulty is algebraic manipulation rather than differentiation itself.
Finally, complete mixed questions without being told which technique to use. Mark each attempt, record the exact cause of any lost mark and repeat a similar question later. The MathsGenie guides on cross-curricular overlap, making Further Maths practice questions and reviewing mock mistakes can support this process.
Conclusion
For AQA Level 2 Further Maths, calculus centres on using differentiation to find and interpret gradients. You should be able to differentiate polynomials, calculate gradients at points, form tangent and normal equations, locate and classify stationary points, identify increasing or decreasing intervals, and solve simple maximum or minimum problems.
Write each stage clearly because method marks may depend on seeing the derivative, the equation dydx=0\frac{dy}{dx}=0dxdy=0, the coordinates and the classification. After reviewing the worked examples, use MathsGenie practice questions and mark schemes to check that you can apply the methods independently.
Sources and referenced URLs
- https://mathsgenie.co.uk/blog/gcse-maths-topics-by-exam-board-and-tier
- https://mathsgenie.co.uk/blog/make-own-gcse-further-maths-practice-questions
- https://mathsgenie.co.uk/blog/gcse-further-maths-cross-curricular-overlap
- https://mathsgenie.co.uk/blog/review-mock-mistakes-gcse-further-maths
- https://mathsgenie.co.uk/blog/gcse-further-maths-to-a-level-jump




