Mean, Median, Mode and Range GCSE Foundation Guide
Revise mean, median, mode and range for GCSE Maths Foundation with clear methods, worked examples, common mistakes and exam questions with answers.

Mean, median and mode are three measures of central tendency, which means they describe a typical or central value in a set of data. The range is a measure of spread, showing how far the data extends from its lowest value to its highest value.
For mean, median, mode and range GCSE Maths Foundation questions, you must know each definition, select the correct method and interpret your answer in context. This guide explains the methods step by step, including worked examples, comparisons, common errors and an exam-style question with a full answer.
Mean, median, mode and range at a glance
The following summary is useful when deciding which calculation a question requires.
| Measure | Meaning | Method |
|---|---|---|
| Mean | The total shared equally between all the values | Add the values and divide by how many there are |
| Median | The middle value when the data is in order | Order the values and locate the middle |
| Mode | The most frequent value | Find the value occurring most often |
| Range | The spread from the lowest to the highest value | Highest value minus lowest value |
The mean, median and mode are all called averages, although they describe the centre of the data in different ways. The range is not an average because it measures spread rather than a typical value.
These ideas form part of GCSE Foundation statistics. Questions may provide a list, table, chart or information about a missing value. You can compare the Foundation requirements for different specifications in the GCSE Maths topics by exam board and tier guide.
How to calculate the mean
The mean uses every value in a data set. Use the formula:
Mean=total of the valuesnumber of values\text{Mean} = \frac{\text{total of the values}}{\text{number of values}}Mean=number of valuestotal of the valuesA reliable method is to complete three steps:
- Add all the values.
- Count how many values there are.
- Divide the total by that number.
Mean worked example
Find the mean of:
4, 7, 3, 2, 94,\ 7,\ 3,\ 2,\ 94, 7, 3, 2, 9First, add the five values:
4+7+3+2+9=254+7+3+2+9=254+7+3+2+9=25There are five values, so divide by 555:
25÷5=525 \div 5=525÷5=5The mean is 555.
The mean does not have to be one of the original values. For example, if five students read a total of 181818 books, the mean is:
18÷5=3.618 \div 5=3.618÷5=3.6A decimal answer can be valid even when the original data contains whole numbers. It represents an equal-share average, not necessarily a value that was actually recorded.
How to find the median
The median is the middle value after the data has been placed in numerical order. Ordering the values is essential because the middle number in the original list might not be the median.
Median with an odd number of values
Find the median of:
12, 5, 9, 4, 712,\ 5,\ 9,\ 4,\ 712, 5, 9, 4, 7Put the values in ascending order:
4, 5, 7, 9, 124,\ 5,\ 7,\ 9,\ 124, 5, 7, 9, 12There are five values, so the third value is in the middle. The median is 777.
Median with an even number of values
Find the median of:
8, 3, 11, 5, 6, 98,\ 3,\ 11,\ 5,\ 6,\ 98, 3, 11, 5, 6, 9First, order the values:
3, 5, 6, 8, 9, 113,\ 5,\ 6,\ 8,\ 9,\ 113, 5, 6, 8, 9, 11There are six values, so there are two middle values, 666 and 888. Find their mean:
(6+8)÷2=7(6+8) \div 2=7(6+8)÷2=7The median is 777. Do not simply choose one of the two middle values.
How to identify the mode
The mode is the value that occurs most frequently. It can usually be found by counting how many times each value appears.
Find the mode of:
2, 3, 5, 3, 7, 3, 52,\ 3,\ 5,\ 3,\ 7,\ 3,\ 52, 3, 5, 3, 7, 3, 5The value 333 occurs three times, more often than any other value. The mode is 333.
A data set can have:
- one mode, if one value is most frequent
- more than one mode, if several values share the greatest frequency
- no mode, if every value occurs equally often
For example, the data 2,2,5,5,82, 2, 5, 5, 82,2,5,5,8 has two modes, 222 and 555. The data 1,3,6,91, 3, 6, 91,3,6,9 has no mode.
For grouped data, the interval with the greatest frequency is called the modal class or modal group. It identifies an interval rather than an exact individual value.
How to calculate the range
The range measures the spread of a data set:
Range=highest value−lowest value\text{Range}=\text{highest value}-\text{lowest value}Range=highest value−lowest valueFind the range of:
14, 8, 11, 19, 614,\ 8,\ 11,\ 19,\ 614, 8, 11, 19, 6The highest value is 191919 and the lowest is 666:
19−6=1319-6=1319−6=13The range is 131313. Only the highest and lowest values are needed, so do not subtract the first number from the last number unless the data is already ordered.
A small range suggests that the values are relatively close together. A large range suggests greater variation, although it may be caused by a single unusually high or low value.
Mean, median, mode and range from a frequency table
A frequency table records how often each value occurs. Foundation questions may ask you to read the mode and range directly or calculate a mean using the frequencies.
| Number of goals | Frequency |
|---|---|
| 000 | 222 |
| 111 | 555 |
| 222 | 444 |
| 333 | 111 |
The mode is 111 goal because it has the highest frequency, 555. The range is:
3−0=33-0=33−0=3To calculate the mean, multiply each number of goals by its frequency:
(0×2)+(1×5)+(2×4)+(3×1)=16(0 \times 2)+(1 \times 5)+(2 \times 4)+(3 \times 1)=16(0×2)+(1×5)+(2×4)+(3×1)=16The total frequency is:
2+5+4+1=122+5+4+1=122+5+4+1=12Therefore:
Mean=16÷12=1.333…\text{Mean}=16 \div 12=1.333\ldotsMean=16÷12=1.333…The mean is approximately 1.331.331.33 goals. The important distinction is that you divide by the total frequency, 121212, not by the four rows in the table.
For more practice at this level, use the MathsGenie averages from frequency tables revision guide.
Choosing the most appropriate average
An exam may ask you to calculate an average, but it may also ask which average best represents the data. The context matters.
- The mean uses all the data, but an extreme value can affect it significantly.
- The median is less affected by extremely high or low values.
- The mode is useful when the most common value or category matters.
- The range helps compare consistency, but it is affected by extreme values.
Suppose five house prices, in thousands of pounds, are:
180, 185, 190, 195, 950180,\ 185,\ 190,\ 195,\ 950180, 185, 190, 195, 950The value 950950950 is much higher than the others. It is an outlier, meaning it lies unusually far from the rest of the data. The mean is pulled upwards, so the median of 190190190 may give a more representative typical price.
When comparing two data sets, use both a measure of central tendency and a measure of spread. A higher mean or median indicates a higher typical value, while a smaller range indicates more consistent data.
Missing-value mean questions
Some Foundation questions give the mean and ask you to find a missing value. Work backwards by using:
Total=Mean×Number of values\text{Total}=\text{Mean} \times \text{Number of values}Total=Mean×Number of valuesThe mean of five numbers is 888. Four of the numbers are 444, 777, 999 and 111111. Find the fifth number.
The total of all five numbers must be:
8×5=408 \times 5=408×5=40The known numbers total:
4+7+9+11=314+7+9+11=314+7+9+11=31Therefore, the missing number is:
40−31=940-31=940−31=9This method is safer than guessing values and repeatedly recalculating the mean.
Common mistakes in Foundation exam questions
Forgetting to order data for the median
The median is based on position in an ordered list. Always rewrite the data from smallest to largest before selecting the middle value.
Dividing the mean by the wrong number
Divide by the number of values, not by the total itself or the number of different values. In a frequency table, add the frequencies to find how many values there are.
Confusing mode and frequency
The mode is the data value with the highest frequency, not the highest frequency itself. If shoe size 666 occurs eight times, the mode is 666, not 888.
Adding when calculating the range
The range is found by subtraction:
highest−lowest\text{highest}-\text{lowest}highest−lowestIt is not the total of the greatest and least values.
Rounding too early
Keep the full calculator value during a calculation and round only the final answer if instructed. Early rounding can make a later answer inaccurate.
Giving an answer without context
If a comparison question asks which group is more consistent, state what the range shows. For example, write, “Group A is more consistent because it has the smaller range.”
Exam-style question
The times, in minutes, taken by seven students to complete a task are:
9, 12, 10, 16, 8, 10, 129,\ 12,\ 10,\ 16,\ 8,\ 10,\ 129, 12, 10, 16, 8, 10, 12a) Find the mode.
b) Find the median.
c) Calculate the mean.
d) Find the range.
Answer
Order the data first:
8, 9, 10, 10, 12, 12, 168,\ 9,\ 10,\ 10,\ 12,\ 12,\ 168, 9, 10, 10, 12, 12, 16a) Both 101010 and 121212 occur twice, so the modes are 101010 and 121212 minutes.
b) The fourth of seven values is in the middle, so the median is 101010 minutes.
c) The total is:
9+12+10+16+8+10+12=779+12+10+16+8+10+12=779+12+10+16+8+10+12=77There are seven students:
77÷7=1177 \div 7=1177÷7=11The mean is 111111 minutes.
d) The range is:
16−8=816-8=816−8=8The range is 888 minutes.
Try 4 more practice questions, checking each method carefully before viewing the worked solution and mark scheme.
How to revise mean, median, mode and range
Start by learning the four definitions accurately. Then practise mixed questions so that you must decide which operation to use rather than following a repeated pattern.
A useful revision sequence is:
- Calculate all four measures from short lists.
- Practise medians with odd and even numbers of values.
- Answer questions involving frequency tables.
- Work backwards from a given mean.
- Compare data sets using an average and the range.
- Complete timed exam questions and check the mark scheme.
MathsGenie provides an interactive averages lesson, an averages revision guide and solutions with mark-scheme guidance. These are most effective when you attempt each question independently before checking the solution.
Conclusion
For mean, median, mode and range GCSE Maths Foundation questions, remember that the mean uses the total, the median uses the ordered middle, the mode uses frequency and the range uses the highest and lowest values. Check whether the data must be ordered, count every value carefully and include units where appropriate.
Once the basic calculations are secure, focus on frequency tables, missing values and comparisons. Use the MathsGenie lesson for explanation, then complete the topic practice questions and check your work against the available solutions and mark schemes.
Sources and referenced URLs
- https://mathsgenie.co.uk/blog/gcse-maths-topics-by-exam-board-and-tier
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-2-2-14-averages/lessons
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-2-2-14-averages/revision-guides
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-2-2-14-averages/solutions
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-2-2-14-averages/questions/q5
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-4-4-18-averages-from-frequency-tables/revision-guides



