Scale Drawings and Maps GCSE Maths Foundation
Learn scale drawings and maps for GCSE Maths Foundation with clear methods, worked examples, common mistakes, revision tips and exam questions.

Scale drawings represent real objects or places at a smaller or larger size while keeping every length in the same proportion. For scale drawings and maps GCSE Maths Foundation questions, you must be able to interpret a scale, convert units, calculate real distances and find lengths on a drawing.
What is a scale drawing?
A scale drawing is an accurate two-dimensional representation in which each length has been enlarged or reduced by the same scale factor. Plans of rooms, maps, technical diagrams and model designs can all use scales.
Scale drawings are different from ordinary sketches. A sketch shows the general shape, but its measurements may not be proportional. In an accurate scale drawing, you can measure a line and use the stated scale to determine the corresponding real length.
Using scale factors, scale diagrams and maps is part of GCSE Foundation content. You can compare the requirements for different specifications in the GCSE Maths topics by exam board and tier guide.
Understanding the different forms of scale
A scale may be presented as a written statement, a ratio or a scale line.
| Form of scale | Meaning |
|---|---|
| 111 cm represents 555 m | Every 111 cm on the drawing represents 555 m in real life |
| 1:1001:1001:100 | Every 111 unit on the drawing represents 100100100 of the same units in real life |
| A labelled scale line | The marked length represents the real distance written beside it |
A ratio scale such as 1:1001:1001:100 uses the same unit on both sides. It could mean 111 cm represents 100100100 cm, or 111 mm represents 100100100 mm. It does not automatically mean 111 cm represents 100100100 m.
A written scale can use different units. For example, 111 cm represents 444 km. You should keep these units while applying the scale, then convert the final answer if necessary.
Essential unit conversions
Unit conversion is often the most important step in scale drawings and maps exam questions. The standard metric relationships you are likely to need are:
- 101010 mm =1=1=1 cm
- 100100100 cm =1=1=1 m
- 100010001000 m =1=1=1 km
- 100000100000100000 cm =1=1=1 km
When converting from a larger unit to a smaller unit, multiply. For example, convert metres to centimetres by multiplying by 100100100. When converting from a smaller unit to a larger unit, divide.
The Conversions and Units revision guide is useful if these relationships are not yet secure.
Finding a real distance from a drawing
To calculate an actual length or distance:
- Measure the relevant line on the drawing if its length is not given.
- Read the scale carefully.
- Multiply the drawing length by the real amount represented by one unit.
- Convert the answer into the requested unit.
- Include the correct unit in your final answer.
Worked example 1: using a written scale
A map uses the scale 111 cm represents 333 km. Two villages are 7.57.57.5 cm apart on the map. Find the real distance.
Each centimetre represents 333 km, so:
7.5×3=22.5 7.5 \times 3=22.5 7.5×3=22.5The villages are 22.522.522.5 km apart.
Multiplication is appropriate because the map distance is being changed into the larger real distance.
Worked example 2: using a ratio scale
A floor plan has a scale of 1:501:501:50. A wall is 8.48.48.4 cm long on the plan. Find its actual length in metres.
The ratio means that 111 cm on the plan represents 505050 cm in real life:
8.4×50=420 cm 8.4 \times 50=420\text{ cm} 8.4×50=420 cmNow convert centimetres to metres:
420÷100=4.2 m 420 \div 100=4.2\text{ m} 420÷100=4.2 mThe actual wall is 4.24.24.2 m long.
Notice that the ratio calculation produced an answer in centimetres because the measured plan length was in centimetres.
Finding a length on a scale drawing
Sometimes the real measurement is given and you must calculate how long it should be on the map or drawing. This reverses the previous process, so you divide by the scale factor.
The reliable method is:
- Convert the real measurement into the unit used by the scale.
- Divide by the amount represented by one drawing unit.
- State the drawing length with its unit.
- If required, draw the line carefully with a ruler.
Worked example 3: drawing from an actual length
A plan uses the scale 111 cm represents 222 m. A real fence is 131313 m long. Find its length on the plan.
Since every 222 m becomes 111 cm, calculate:
13÷2=6.5 13 \div 2=6.5 13÷2=6.5The fence must be 6.56.56.5 cm long on the plan.
Worked example 4: ratio scale with unit conversion
A map has a scale of 1:250001:250001:25000. A path is 111 km long. Calculate its length on the map in centimetres.
First convert 111 km to centimetres:
1 km=100000 cm 1\text{ km}=100000\text{ cm} 1 km=100000 cmNow divide by the scale factor:
100000÷25000=4 100000 \div 25000=4 100000÷25000=4The path is 444 cm long on the map.
Using a scale line
A scale line shows a drawn length together with the real distance it represents. For example, a 444 cm scale line might represent 101010 km.
You can find the value of 111 cm first:
10÷4=2.5 10 \div 4=2.5 10÷4=2.5Therefore, each centimetre represents 2.52.52.5 km. A map distance of 666 cm would represent:
6×2.5=15 km 6 \times 2.5=15\text{ km} 6×2.5=15 kmA scale line remains proportional when a complete map is enlarged or reduced. A written statement such as “111 cm represents 2.52.52.5 km” may no longer be accurate after resizing. In an examination, always use the scale and information printed in the question.
Constructing an accurate scale drawing
Some questions ask you to draw a shape from given real measurements. Convert each actual length separately, then construct the diagram using a sharp pencil and ruler.
Check the scale calculation before drawing, because a neat diagram based on incorrect dimensions will still be wrong. If angles are supplied, use a protractor accurately. Scale changes lengths but does not change the angles of the shape.
Common mistakes in scale drawings and maps
Using the scale in the wrong direction
Multiply to move from a small drawing length to a larger real length. Divide to move from the real measurement to the smaller drawing length. A quick size check can reveal a reversed calculation.
Mixing units in a ratio scale
For 1:2001:2001:200, a measured length of 333 cm represents 600600600 cm, not 600600600 m. Convert 600600600 cm to 666 m only after applying the ratio.
Forgetting the final unit conversion
An answer of 450450450 cm may be mathematically correct, but the question could ask for metres. Read the requested unit before writing your final answer.
Treating area as a length
A scale such as 1:501:501:50 directly compares lengths. Do not use it as an area ratio. Identify exactly what is being measured before choosing your calculation.
Measuring an online or resized diagram
A diagram displayed on a screen may have been resized. Only measure it when the question requires measurement and you have a correctly printed version. Otherwise, use the numerical lengths supplied.
Rounding too early
Keep complete calculator values until the final step. Early rounding can make the final distance inaccurate, particularly when several conversions are involved.
Exam-style question
A map has a scale of 1:500001:500001:50000. The straight-line distance between a station and a museum is 7.67.67.6 cm on the map.
Calculate the real distance in kilometres.
Answer
The map measurement is in centimetres, so the scale gives the real distance in centimetres:
7.6×50000=380000 cm 7.6 \times 50000=380000\text{ cm} 7.6×50000=380000 cmConvert centimetres to metres:
380000÷100=3800 m 380000 \div 100=3800\text{ m} 380000÷100=3800 mThen convert metres to kilometres:
3800÷1000=3.8 km 3800 \div 1000=3.8\text{ km} 3800÷1000=3.8 kmThe real distance is 3.83.83.8 km.
Try more scale drawings and maps exam questions, checking the available solutions after making a full attempt.
Further exam-style practice questions
Question 1
On a map, 111 cm represents 444 km. Two towns are 343434 km apart. Find their distance on the map.
Answer:
34÷4=8.5 34 \div 4=8.5 34÷4=8.5The towns are 8.58.58.5 cm apart on the map.
Question 2
A 555 cm scale line represents 121212 km. A road measures 8.58.58.5 cm on the same map. Find its real length.
Answer:
First find the distance represented by 111 cm:
12÷5=2.4 km 12 \div 5=2.4\text{ km} 12÷5=2.4 kmThen calculate the distance represented by 8.58.58.5 cm:
8.5×2.4=20.4 km 8.5 \times 2.4=20.4\text{ km} 8.5×2.4=20.4 kmThe road is 20.420.420.4 km long.
How to revise scale drawings effectively
Practise identifying three pieces of information before calculating: the drawing length, the real length and the scale. Write the units beside every value so that incompatible units are easier to notice.
Use the MathsGenie Scale Drawings lesson to review the method, then complete the Scale Drawings exam booklet. Mark your work and redo questions where you multiplied instead of divided, missed a conversion or omitted a unit.
Scale questions can also be combined with directions and angles. The Bearings revision lesson is the appropriate next step when a map question includes north lines or three-figure bearings.
Conclusion
For scale drawings and maps, first decide whether you are moving from the drawing to real life or from real life to the drawing. Multiply to find the larger real measurement, divide to find the smaller drawing measurement, and make all required unit conversions carefully.
Always show the scale calculation, conversion and final unit. Use MathsGenie's lesson and practice booklet to build accuracy before attempting mixed past-paper questions.
Sources and referenced URLs
- https://mathsgenie.co.uk/blog/gcse-maths-topics-by-exam-board-and-tier
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-3-3-10-conversions-and-units/revision-guides
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-3-3-11-scale-drawings
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-3-3-11-scale-drawings/booklet
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-3-3-11-scale-drawings/questions/q1
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-4-4-16-bearings



