Plans and Elevations GCSE Maths Revision Guide
Revise plans and elevations GCSE Maths with clear methods, worked examples, common mistakes and exam-style practice questions with complete answers.

Plans and elevations are accurate two-dimensional views of a three-dimensional object. A plan shows the view from directly above, while a front elevation and side elevation show the object from specified horizontal directions.
For plans and elevations GCSE Maths questions, you need to interpret these views, draw them accurately and sometimes reconstruct information about the original solid. This guide explains the topic step by step, including scale drawings, cube arrangements, worked examples and exam-style questions.
What are plans and elevations?
Plans and elevations are examples of orthographic projections. Each view is drawn as though you are looking straight at the object, not from an angle. This means an elevation should not contain perspective lines or show depth receding into the distance.
| View | Direction of view | Dimensions normally shown |
|---|---|---|
| Plan | Directly above | Width and depth |
| Front elevation | Directly from the front | Width and height |
| Side elevation | Directly from one side | Depth and height |
A plan does not normally show the height of the object. Similarly, a front elevation cannot directly show how far the object extends backwards.
This topic is part of GCSE geometry and measures. Students may be asked to interpret or construct plans and elevations, so you should be prepared both to read a diagram and to produce one. It is relevant across Foundation and Higher tier, although more demanding questions may combine several views or require you to reconstruct a solid.
You can check how this topic fits your course using the GCSE Maths topics by exam board and tier.
How to identify each view
The viewing direction is the most important piece of information. If an arrow marks the front, imagine placing your eye at the arrow and looking horizontally towards the object.
The plan
Imagine looking vertically down at the object. Record its footprint and any visible changes in the top surface. Height is ignored unless a change in height creates a visible boundary from above.
For a cuboid measuring 8 cm8\text{ cm}8 cm wide, 5 cm5\text{ cm}5 cm deep and 3 cm3\text{ cm}3 cm high, the plan is a rectangle measuring 8 cm8\text{ cm}8 cm by 5 cm5\text{ cm}5 cm. The height of 3 cm3\text{ cm}3 cm does not appear in this view.
The front elevation
Look directly at the marked front face. The horizontal measurement is the object's width, while the vertical measurement is its height.
For the same cuboid, the front elevation is an 8 cm8\text{ cm}8 cm by 3 cm3\text{ cm}3 cm rectangle. Its depth is hidden because you are looking along that dimension.
The side elevation
Look directly from the stated side. A side elevation normally displays depth horizontally and height vertically.
The cuboid's side elevation is therefore a 5 cm5\text{ cm}5 cm by 3 cm3\text{ cm}3 cm rectangle. Be careful about whether the question specifies the left or right side, particularly when the object is not symmetrical.
A reliable method for drawing plans and elevations
Use the following method whenever you are asked to construct a view.
- Identify the viewing direction. Locate the arrow or the labelled front of the solid.
- Choose the relevant dimensions. A plan uses width and depth. An elevation uses height and one horizontal dimension.
- Find the outside outline. Imagine flattening everything visible from that direction onto a single plane.
- Add visible changes. Include steps, changes in height and boundaries that can be seen from the stated direction.
- Ignore hidden depth. Do not draw perspective lines or features completely concealed behind another part of the solid unless the question provides a convention for hidden edges.
- Check the scale and grid. Count squares carefully and use a ruler for straight lines.
The MathsGenie plans and elevations lesson provides further guided practice with these steps.
Plans and elevations worked examples
Worked example 1: A stepped solid made from cubes
A solid is built from unit cubes. The numbers show the height of each stack when viewed from above. The front of the solid is at the bottom of the table.
| Position | Left | Middle | Right |
|---|---|---|---|
| Back row | 111 | 333 | 222 |
| Front row | 222 | 111 | 000 |
A height of 000 means that no cube occupies that position.
Step 1: Find the plan.
Every position with a positive number is occupied. The plan therefore contains five unit squares, with the front-right square missing. The values 111, 222 and 333 do not change the footprint.
Step 2: Find the front elevation.
Look through each left-to-right column and take the greatest height because shorter stacks may be hidden behind taller ones.
- Left column: maximum of 111 and 222 is 222.
- Middle column: maximum of 333 and 111 is 333.
- Right column: maximum of 222 and 000 is 222.
The front elevation has column heights:
2, 3, 2 2,\ 3,\ 2 2, 3, 2Step 3: Find the right-side elevation.
From the right, compare all stacks across the width for each depth position.
- Front row maximum: 222.
- Back row maximum: 333.
From front to back, the right-side elevation has heights:
2, 3 2,\ 3 2, 3This example shows an important principle: an elevation records the greatest visible height along each line of sight.
Worked example 2: Reading dimensions from different views
A solid has these overall dimensions:
- width =7 cm=7\text{ cm}=7 cm
- depth =4 cm=4\text{ cm}=4 cm
- height =6 cm=6\text{ cm}=6 cm
Its overall plan measures 7 cm7\text{ cm}7 cm by 4 cm4\text{ cm}4 cm. Its front elevation measures 7 cm7\text{ cm}7 cm by 6 cm6\text{ cm}6 cm, and its side elevation measures 4 cm4\text{ cm}4 cm by 6 cm6\text{ cm}6 cm.
The dimensions must agree where views overlap. The width in the plan must equal the width in the front elevation. The depth in the plan must equal the horizontal length of the side elevation. The height must be consistent in both elevations.
Worked example 3: Using a scale
A rectangular building has a plan drawn to a scale of 1:501:501:50. On the drawing, it measures 6 cm6\text{ cm}6 cm by 4 cm4\text{ cm}4 cm. Its front elevation has a drawn height of 5 cm5\text{ cm}5 cm.
A scale of 1:501:501:50 means that 111 unit on the drawing represents 505050 of the same units in real life.
6×50=300 cm=3 m 6\times 50=300\text{ cm}=3\text{ m} 6×50=300 cm=3 m 4×50=200 cm=2 m 4\times 50=200\text{ cm}=2\text{ m} 4×50=200 cm=2 m 5×50=250 cm=2.5 m 5\times 50=250\text{ cm}=2.5\text{ m} 5×50=250 cm=2.5 mThe building is 3 m3\text{ m}3 m wide, 2 m2\text{ m}2 m deep and 2.5 m2.5\text{ m}2.5 m high. Always convert the final measurements into the units requested by the question.
More topic notes and demonstrations are available in the plans and elevations revision guide and revision videos.
Reconstructing a solid from its views
Plans and elevations do not always determine one unique solid. Two different arrangements can sometimes produce the same plan and the same maximum heights.
Suppose the plan shows that four positions are occupied and the front elevation has heights 2,3,12,3,12,3,1. This tells you the greatest height in each front-view column, but it may not tell you whether the tallest stack is at the front or the back. A side elevation supplies additional information, but even three views may occasionally allow more than one arrangement.
When reconstructing a solid:
- Use the plan to identify all occupied positions.
- Use the front elevation to set the maximum height in each width column.
- Use the side elevation to set the maximum height in each depth row.
- Check every stack against both elevations.
- Do not assume hidden cubes exist unless they are required or clearly stated.
If asked for the minimum number of cubes, use only the cubes necessary to satisfy every view. If asked for the maximum number, fill each allowed position as high as possible without changing an elevation.
Common mistakes in plans and elevations exam questions
Drawing a perspective picture
An elevation is flat. Diagonal lines should appear only when the actual edge is diagonal, not merely to make the object look three-dimensional.
Confusing the plan with the front elevation
The plan is always the view from above. It uses width and depth, not height.
Adding heights instead of taking the maximum
If two stacks are behind one another, their heights are not added in an elevation. You record the tallest visible stack along that line of sight.
For stacks of heights 222 and 444, the elevation reaches 444 units, not 666 units.
Drawing hidden features as visible lines
A feature completely behind a taller part may not appear in the elevation. Trace each line of sight before adding an internal boundary.
Reversing a side elevation
The view from the left can be the horizontal reflection of the view from the right. Write down the viewing direction before drawing.
Ignoring scale or units
A grid square does not automatically represent 1 cm1\text{ cm}1 cm. Read the scale and labels before measuring or counting.
Embedded exam-style question
A solid is made from identical cubes. The table gives the number of cubes in each vertical stack. The front is at the bottom of the table.
| Position | First | Second | Third | Fourth |
|---|---|---|---|---|
| Back row | 222 | 111 | 333 | 333 |
| Front row | 111 | 000 | 222 | 111 |
Question
- Describe the plan of the solid. [1][1][1]
- Give the column heights of the front elevation from left to right. [1][1][1]
- Give the heights of the right-side elevation from front to back. [1][1][1]
- Work out the total number of cubes. [1][1][1]
Answer
- The plan contains every square in the back row. In the front row, the first, third and fourth squares are occupied, while the second is empty.
- Taking the greatest height in each column gives:
- The greatest front-row height is 222, and the greatest back-row height is 333. From front to back, the heights are:
- Add all the stack heights:
The solid contains 131313 cubes.
Try 4 more plans and elevations exam questions.
Further exam-style practice questions
Question 1
A cuboid is 9 cm9\text{ cm}9 cm wide, 5 cm5\text{ cm}5 cm deep and 4 cm4\text{ cm}4 cm high. State the dimensions of its plan, front elevation and side elevation.
Answer: Plan: 9 cm9\text{ cm}9 cm by 5 cm5\text{ cm}5 cm. Front elevation: 9 cm9\text{ cm}9 cm by 4 cm4\text{ cm}4 cm. Side elevation: 5 cm5\text{ cm}5 cm by 4 cm4\text{ cm}4 cm.
Question 2
A plan is drawn to a scale of 1:1001:1001:100. A wall measures 7.5 cm7.5\text{ cm}7.5 cm on the plan. Find its actual length in metres.
Answer:
7.5×100=750 cm=7.5 m 7.5\times100=750\text{ cm}=7.5\text{ m} 7.5×100=750 cm=7.5 mQuestion 3
The front elevation of a cube arrangement has column heights 3,2,43,2,43,2,4. A second stack of height 111 is placed directly behind the stack of height 333. Explain why the front elevation does not change.
Answer: The new stack is shorter and lies on the same line of sight as the height-333 stack. The greatest visible height in that column remains 333.
For additional questions with worked solutions and mark allocations, use the MathsGenie question bank. Once the method is secure, practise selecting the correct approach in full GCSE Maths past papers.
Final revision checklist
Before an examination, make sure you can:
- identify a plan, front elevation and side elevation;
- select the correct pair of dimensions for each view;
- draw flat views without perspective;
- use maximum visible heights for arrangements of cubes;
- interpret left-side and right-side views correctly;
- reconstruct possible solids from two-dimensional views;
- apply drawing scales and convert units;
- check that dimensions agree between related views.
Plans and elevations become much easier when you separate width, depth and height and consider only one viewing direction at a time. Review the method with the MathsGenie topic lesson, then use the practice questions and mark schemes to check that your drawings are accurate and complete.
Sources and referenced URLs
- https://mathsgenie.co.uk/blog/gcse-maths-topics-by-exam-board-and-tier
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-4-4-17-plans-and-elevations/lessons
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-4-4-17-plans-and-elevations/revision-guides
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-4-4-17-plans-and-elevations/videos
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-4-4-17-plans-and-elevations/questions
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-4-4-17-plans-and-elevations/questions/q1
- https://mathsgenie.co.uk/gcse/maths/edexcel/papers



