Hardest GCSE Maths Histograms Questions Explained
Master the hardest GCSE Maths histograms questions with Higher tier worked examples, common mistakes, exam tips and targeted practice tasks.

The hardest GCSE Maths histograms questions combine several ideas: unequal class widths, frequency density, missing scales, estimates within intervals and averages from grouped data. The essential fact is that frequency is represented by the area of a bar, not its height alone.
This guide explains the most demanding Higher tier question types step by step. It also covers common mistakes, efficient checking methods and an exam-style question for you to attempt.
The essential histogram rules
A histogram represents grouped continuous data. The horizontal axis shows the class intervals, while the vertical axis usually shows frequency density.
The three quantities are connected by:
frequency density=frequencyclass width\text{frequency density}=\frac{\text{frequency}}{\text{class width}}frequency density=class widthfrequencyRearranging gives:
frequency=class width×frequency density\text{frequency}=\text{class width}\times\text{frequency density}frequency=class width×frequency densityThis second formula explains why bar area represents frequency. A bar's width is the class width and its height is the frequency density, so its area is the frequency.
| Quantity required | Calculation |
|---|---|
| Class width | Upper boundary minus lower boundary |
| Frequency density | Frequency divided by class width |
| Frequency | Class width multiplied by frequency density |
| Proportion of a class | Required width divided by full class width |
Histograms with equal and unequal class intervals form part of Higher tier statistics content in the current AQA and Pearson Edexcel specifications. You can review the core method in the MathsGenie histograms revision lesson and check how the topic fits your course using the GCSE Maths topics by exam board and tier.
Why the height of a histogram bar is not the frequency
Reading the height as the frequency is the most serious histogram error. It only appears to work when every class has the same width, and even then the vertical axis may still be labelled frequency density.
Consider two bars:
- A class of width 555 has frequency density 888.
- A class of width 202020 has frequency density 333.
The first frequency is:
5×8=405\times8=405×8=40The second frequency is:
20×3=6020\times3=6020×3=60Although the first bar is taller, the second represents more observations because it is much wider. Always use area when comparing frequencies.
Hard question type 1: calculating missing bar heights
A frequency table gives the following information.
| Time, ttt minutes | Frequency |
|---|---|
| 0<t≤100<t\leq100<t≤10 | 151515 |
| 10<t≤2510<t\leq2510<t≤25 | 363636 |
| 25<t≤4525<t\leq4525<t≤45 | 282828 |
To draw the histogram, calculate each class width before finding the frequency density.
Step 1: calculate the class widths
The widths are:
10−0=10,25−10=15,45−25=2010-0=10,\qquad 25-10=15,\qquad 45-25=2010−0=10,25−10=15,45−25=20Step 2: divide each frequency by its class width
For 0<t≤100<t\leq100<t≤10:
1510=1.5\frac{15}{10}=1.51015=1.5For 10<t≤2510<t\leq2510<t≤25:
3615=2.4\frac{36}{15}=2.41536=2.4For 25<t≤4525<t\leq4525<t≤45:
2820=1.4\frac{28}{20}=1.42028=1.4The bars must therefore have heights 1.51.51.5, 2.42.42.4 and 1.41.41.4. Notice that the largest frequency does not produce the widest or necessarily the tallest bar.
Hard question type 2: interpreting a missing vertical scale
Some difficult questions do not label the frequency density scale. Instead, they give the frequency represented by one bar. You must use that information to calibrate the entire histogram.
Suppose the class 10<x≤1510<x\leq1510<x≤15 has a drawn height of 333 grid units and contains 363636 observations. Another bar, for 15<x≤2515<x\leq2515<x≤25, has a drawn height of 444 grid units. Find its frequency.
Step 1: find the area of the known bar in grid units
The known class has width 555 and drawn height 333:
grid area=5×3=15\text{grid area}=5\times3=15grid area=5×3=15Those 151515 grid-area units represent a frequency of 363636. Therefore, one grid-area unit represents:
3615=2.4\frac{36}{15}=2.41536=2.4Step 2: find the area of the unknown bar
The second class has width 101010 and drawn height 444:
10×4=4010\times4=4010×4=40Step 3: apply the scale factor
40×2.4=9640\times2.4=9640×2.4=96The second bar represents a frequency of 969696.
An alternative is to compare bar areas directly:
unknown frequency36=10×45×3\frac{\text{unknown frequency}}{36}=\frac{10\times4}{5\times3}36unknown frequency=5×310×4This ratio method is often quicker when the vertical scale is not numbered.
Hard question type 3: estimating part of a class interval
A histogram shows a frequency density of 444 for 10<x≤2010<x\leq2010<x≤20 and a frequency density of 333 for 20<x≤3520<x\leq3520<x≤35. Estimate how many observations lie between 181818 and 323232.
The required range cuts through both bars, so only the relevant parts of their areas should be used.
Step 1: use the part from 181818 to 202020
This section has width:
20−18=220-18=220−18=2Its estimated frequency is:
2×4=82\times4=82×4=8Step 2: use the part from 202020 to 323232
This section has width:
32−20=1232-20=1232−20=12Its estimated frequency is:
12×3=3612\times3=3612×3=36Step 3: combine the results
8+36=448+36=448+36=44The estimated number of observations is 444444.
This is an estimate because a histogram does not show exactly where values lie within each class. The calculation assumes the data are spread evenly throughout each interval. That assumption is a mathematical model, not a fact about the original data.
Hard question type 4: estimating the median from a histogram
A histogram represents the following frequency densities.
| Interval | Frequency density |
|---|---|
| 0<x≤100<x\leq100<x≤10 | 111 |
| 10<x≤2010<x\leq2010<x≤20 | 333 |
| 20<x≤3520<x\leq3520<x≤35 | 444 |
| 35<x≤5035<x\leq5035<x≤50 | 222 |
Step 1: recover the frequencies
Multiply each class width by its frequency density:
10×1=1010\times1=1010×1=10 10×3=3010\times3=3010×3=30 15×4=6015\times4=6015×4=60 15×2=3015\times2=3015×2=30The total frequency is:
10+30+60+30=13010+30+60+30=13010+30+60+30=130Step 2: locate the median position
Use half the total frequency:
1302=65\frac{130}{2}=652130=65The cumulative frequencies are 101010, 404040, 100100100 and 130130130. The 656565th value therefore lies in the interval 20<x≤3520<x\leq3520<x≤35.
Step 3: interpolate within the median class
There are 404040 observations below the median class, so the median is the 252525th observation within that class:
65−40=2565-40=2565−40=25The class contains 606060 observations altogether, so the required fraction of its width is:
2560\frac{25}{60}6025The class width is 151515, giving:
20+2560×15=26.2520+\frac{25}{60}\times15=26.2520+6025×15=26.25The estimated median is 26.2526.2526.25. As with any calculation from grouped data, this estimate assumes an even distribution within the class.
Hard question type 5: forming an equation from an area
Higher tier questions may describe one bar as a percentage of the complete data set. This requires an equation because the unknown frequency is also part of the total.
Known bars in a histogram represent 909090 observations altogether. An unknown bar represents 40%40\%40% of the complete data set. Find its frequency, xxx.
The total frequency is x+90x+90x+90, so:
x=0.4(x+90)x=0.4(x+90)x=0.4(x+90)Expand and solve:
x=0.4x+36x=0.4x+36x=0.4x+36 0.6x=360.6x=360.6x=36 x=60x=60x=60If the unknown class has width 101010, its bar height is:
6010=6\frac{60}{10}=61060=6A frequent mistake is to calculate 40%40\%40% of 909090. The 909090 observations are only the known portion, not the complete data set.
Embedded exam-style histogram question
A histogram has four class intervals. Three bar heights are shown below, while the bar for 45<x≤5545<x\leq5545<x≤55 is missing.
| Interval | Frequency density |
|---|---|
| 0<x≤100<x\leq100<x≤10 | 222 |
| 10<x≤2510<x\leq2510<x≤25 | 222 |
| 25<x≤4525<x\leq4525<x≤45 | 222 |
| 45<x≤5545<x\leq5545<x≤55 | Unknown |
The final class contains 40%40\%40% of all the observations. Calculate the missing frequency density.
Answer
The known frequencies are:
10×2=20,15×2=30,20×2=4010\times2=20,\qquad 15\times2=30,\qquad 20\times2=4010×2=20,15×2=30,20×2=40Their total is 909090. Let the missing frequency be xxx:
x=0.4(x+90)x=0.4(x+90)x=0.4(x+90)Solving gives x=60x=60x=60. The missing class has width 101010, so its frequency density is:
6010=6\frac{60}{10}=61060=6The missing bar height is 666.
Try 4 more histogram practice questions, checking each solution only after you have shown your method.
Common mistakes in the hardest histogram questions
- Using frequency as the bar height. Divide frequency by class width before drawing a bar.
- Using the interval endpoints as the width. For 20<x≤3520<x\leq3520<x≤35, the width is 35−20=1535-20=1535−20=15, not 353535.
- Ignoring part-bars. If a requested range cuts through a class, use only the corresponding fraction of its area.
- Forgetting that grouped estimates are approximate. A precise-looking decimal can still be an estimate because the original values are unknown.
- Using the tallest bar as the modal class without checking the axis. On a correctly drawn histogram, the tallest bar does identify the class with greatest frequency density. It does not necessarily identify the class with greatest frequency.
- Rounding during intermediate steps. Keep exact fractions or unrounded calculator values until the final answer.
- Omitting the working. Questions may award separate marks for class width, frequency density, area and interpolation.
A reliable Higher tier exam method
For any difficult histogram question, use this order:
- Write the class widths next to the intervals.
- Decide whether you need frequency, density or a proportion of a bar.
- Use frequency=class width×frequency density\text{frequency}=\text{class width}\times\text{frequency density}frequency=class width×frequency density.
- If the scale is missing, calibrate it using a bar with a known frequency.
- For a partial interval, use only the relevant width.
- For a median or quartile, calculate frequencies and cumulative frequencies first.
- Check that all bar areas reproduce the stated total frequency.
You can compare your approach with the MathsGenie histogram revision guide, practise a more demanding histogram question, or use the printable histogram exam booklet with answers.
Conclusion
The hardest GCSE Maths histograms questions become manageable when every calculation is based on area. Class width multiplied by frequency density gives frequency, while partial areas provide estimates for ranges inside a class.
For Higher tier revision, practise questions involving missing scales, interpolation, percentages and averages rather than only drawing basic bars. MathsGenie's histogram lesson, practice questions and worked solutions provide a focused way to apply these methods before moving on to past and predicted papers.
Sources and referenced URLs
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-7-7-16-histograms
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-7-7-16-histograms/revision-guides
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-7-7-16-histograms/questions/q1
- https://mathsgenie.co.uk/gcse/maths/edexcel/grade-7-7-16-histograms/questions/q27
- https://www.mathsgenie.co.uk/resources/7-histograms.pdf
- https://mathsgenie.co.uk/blog/gcse-maths-topics-by-exam-board-and-tier



