Area Under a Graph GCSE Maths Explained
Area under a graph GCSE maths: learn the method with worked examples, common mistakes and exam-style speed-time graph questions for confident revision.

A student can understand every word in an area-under-a-graph question and still get the answer wrong. That is what keeps happening to our hypothetical student, Sam. He knows the formulae for rectangles, triangles and trapezia, but the graph makes them feel like a different topic.
The idea finally clicks when he stops searching for a special new formula. Area under a graph GCSE maths questions are usually shape questions in disguise. You divide the region into familiar shapes, calculate each area and add the results. On a speed-time graph, that area represents distance travelled.
Here is the method you can use:
- identify what the area represents from the graph labels
- mark the required interval on the horizontal axis
- split the region into rectangles, triangles or trapezia
- calculate each area carefully
- add the areas and include the correct units
What does the area under a graph mean?
The area under a graph is the region between the plotted line or curve and the horizontal axis, over a stated interval.
In GCSE Maths, you will most often meet this idea through motion graphs. For a speed-time graph:
distance travelled=area under the graph\text{distance travelled}=\text{area under the graph}distance travelled=area under the graphThis relationship makes sense from the units. If speed is measured in metres per second and time is measured in seconds, multiplying them gives:
ms×s=m\frac{\text{m}}{\text{s}}\times \text{s}=\text{m}sm×s=mSo the area represents a distance in metres.
For a velocity-time graph, the signed area represents displacement. An area below the time axis is negative when calculating displacement. If a question asks for total distance travelled, calculate the size of each area and add the positive values.
Maths Genie’s velocity-time graphs revision guide reinforces the connection between velocity, time and the area beneath the graph.
The reliable method for area under a graph questions
Sam’s early mistake is to look at the whole region and hope that one formula will fit it. The more reliable approach is to make the diagram simpler.
Read both axes
Check the quantities and units before calculating. A time axis might use seconds, minutes or hours. The vertical axis could show speed, velocity or another rate.
Mark the interval
If the question asks for the area between t=4t=4t=4 and t=10t=10t=10, ignore any part outside that interval. Drawing vertical boundary lines can help isolate the correct region.
Split the region into known shapes
Use these GCSE area formulae:
rectangle area=base×height\text{rectangle area}=\text{base}\times\text{height}rectangle area=base×height triangle area=12×base×height\text{triangle area}=\frac{1}{2}\times\text{base}\times\text{height}triangle area=21×base×height trapezium area=12(a+b)h\text{trapezium area}=\frac{1}{2}(a+b)htrapezium area=21(a+b)hFor a trapezium beneath a graph, aaa and bbb are usually the two parallel vertical sides. The value hhh is the horizontal width between them.
Calculate separately and add
Write down the area of every shape before finding the total. This produces clearer working and makes it easier to recover method marks if the final arithmetic goes wrong.
Add units
Use the axis units to determine the final unit. For example:
km/h×h=km\text{km/h}\times\text{h}=\text{km}km/h×h=kmYou now have the complete method. To practise applying it without setting up your own questions, start the Maths Genie velocity-time graphs Question Bank and work through each shape one at a time.
Area under a graph worked examples
A triangular region
Sam sees a speed-time graph where an object accelerates uniformly from 0 m/s0\text{ m/s}0 m/s to 12 m/s12\text{ m/s}12 m/s in 5 s5\text{ s}5 s. The region under the line is a triangle.
Its base is 555 and its perpendicular height is 121212:
distance=12×5×12\text{distance}=\frac{1}{2}\times5\times12distance=21×5×12 distance=30 m\text{distance}=30\text{ m}distance=30 mThe common trap is to calculate 5×12=605\times12=605×12=60. That would treat the region as a rectangle, including space above the sloping line. The factor of 12\frac{1}{2}21 matters.
A rectangle and a triangle
An object accelerates from rest to 8 m/s8\text{ m/s}8 m/s during the first 4 s4\text{ s}4 s. It then travels at 8 m/s8\text{ m/s}8 m/s for another 6 s6\text{ s}6 s.
The first region is a triangle:
A1=12×4×8=16A_1=\frac{1}{2}\times4\times8=16A1=21×4×8=16The second region is a rectangle:
A2=6×8=48A_2=6\times8=48A2=6×8=48Therefore:
total distance=16+48=64 m\text{total distance}=16+48=64\text{ m}total distance=16+48=64 mThis is where the topic begins to feel manageable for Sam. The graph has not changed. He has changed what he sees: not one complicated region, but two ordinary shapes.
You can compare this layout with the fully worked medium velocity-time graph solutions.
One trapezium
A vehicle’s speed increases uniformly from 6 m/s6\text{ m/s}6 m/s to 14 m/s14\text{ m/s}14 m/s over 10 s10\text{ s}10 s. The area is a trapezium whose parallel sides have lengths 666 and 141414.
distance=12(6+14)×10\text{distance}=\frac{1}{2}(6+14)\times10distance=21(6+14)×10 distance=100 m\text{distance}=100\text{ m}distance=100 mYou could split this into a rectangle and a triangle, but the trapezium formula is quicker. Both approaches give the same answer:
(6×10)+(12×10×8)=60+40=100 m(6\times10)+\left(\frac{1}{2}\times10\times8\right)=60+40=100\text{ m}(6×10)+(21×10×8)=60+40=100 mThe hard velocity-time graph worked solutions show how this same principle extends to multi-stage journeys.
Estimating the area beneath a curve
A curved boundary does not usually form an exact triangle or trapezium. At GCSE, the question may ask you to estimate the area by dividing the interval into strips and treating each strip as a trapezium.
Suppose the values of a curve at intervals of 222 units are 333, 777, 999 and 121212. There are three trapezia, each with width 222:
A1=12(3+7)×2=10A_1=\frac{1}{2}(3+7)\times2=10A1=21(3+7)×2=10 A2=12(7+9)×2=16A_2=\frac{1}{2}(7+9)\times2=16A2=21(7+9)×2=16 A3=12(9+12)×2=21A_3=\frac{1}{2}(9+12)\times2=21A3=21(9+12)×2=21Therefore, the estimated area is:
10+16+21=47 units210+16+21=47\text{ units}^210+16+21=47 units2It is an estimate because the straight top of each trapezium does not follow the curve exactly. Narrower strips generally follow a smooth curve more closely, although you should use the intervals specified in the question.
Common mistakes to avoid
Using the wrong width
The base of a shape is the difference between its horizontal coordinates. From t=3t=3t=3 to t=9t=9t=9, the width is:
9−3=69-3=69−3=6It is not 999.
Forgetting the triangle factor
A triangular region requires multiplication by 12\frac{1}{2}21. Writing the formula before substituting values helps prevent this error.
Mixing up trapezium dimensions
In 12(a+b)h\frac{1}{2}(a+b)h21(a+b)h, the values aaa and bbb are the parallel sides. On many motion graphs, those sides are vertical speed values, while hhh is the horizontal time interval.
Giving area units instead of contextual units
A speed-time graph may look like a geometry diagram, but its area is a distance. The answer should be in metres or kilometres, not square metres.
Ignoring an area below the axis
For displacement, an area below the time axis contributes negatively. For total distance, use the magnitude of each region. Read the exact wording before deciding whether to subtract or add.
Rounding too early
Keep calculator values unrounded during intermediate steps. Round only the final answer, using the accuracy requested by the question.
Exam-style practice
Try these before checking the answers.
- A car accelerates uniformly from rest to 20 m/s20\text{ m/s}20 m/s in 8 s8\text{ s}8 s. Find the distance travelled.
- A cyclist travels at 6 m/s6\text{ m/s}6 m/s for 15 s15\text{ s}15 s and then slows uniformly to rest over 5 s5\text{ s}5 s. Find the total distance.
- A velocity-time graph forms a triangle below the axis with base 4 s4\text{ s}4 s and perpendicular height 3 m/s3\text{ m/s}3 m/s. Find its contribution to displacement.
The answers are:
12×8×20=80 m\frac{1}{2}\times8\times20=80\text{ m}21×8×20=80 m (6×15)+(12×5×6)=105 m(6\times15)+\left(\frac{1}{2}\times5\times6\right)=105\text{ m}(6×15)+(21×5×6)=105 m −(12×4×3)=−6 m-\left(\frac{1}{2}\times4\times3\right)=-6\text{ m}−(21×4×3)=−6 mFor a longer set, use the printable velocity-time graph questions, then check your method against the included mark scheme.
Make the method stick
Sam did not improve by memorising another formula. He improved when he built the same routine into every question: read the axes, mark the interval, split the area, calculate each shape and check the units. Knowing that routine is the first step; following it under exam pressure takes deliberate practice.
Your turn. Start the Maths Genie area-under-a-graph lesson and Question Bank and apply the method to every question.



