Vectors A Level Maths Revision Guide
Revise vectors A level Maths step by step, with notation, magnitude, position vectors, geometric proofs, worked examples and exam questions.

Vectors describe quantities with both magnitude and direction. In vectors A level Maths questions, you must work confidently with vector notation, components, magnitudes, position vectors and geometric relationships in two and three dimensions.
This guide explains each skill step by step, including vectors worked examples, common mistakes and an exam-style question with a full answer. The content covers the core ideas found across the main A-level Maths specifications, although the precise organisation varies by exam board.
What you need to know about vectors at A level
A scalar has magnitude only. Examples include mass, time, temperature and speed. A vector has magnitude and direction, so examples include displacement, velocity, acceleration and force.
At A level, you should be able to:
- represent vectors in component form using column vectors or unit vectors
- add and subtract vectors
- multiply a vector by a scalar
- calculate a vector's magnitude and direction
- find a unit vector
- use position vectors and find displacement between points
- divide a line segment in a given ratio
- identify parallel and collinear vectors
- solve geometric problems in two and three dimensions
- apply vectors to quantities such as velocity, acceleration and force
Scalar products, vector products and more advanced vector equations of lines may appear in Further Maths courses, but they are not part of every standard A-level Maths vectors unit. Always check your exam board's specification.
The MathsGenie Edexcel A-level Maths revision page places vectors alongside the other pure mathematics topics. Students following another board can use the techniques in this guide, then check the notation and emphasis required by their own specification.
Vector notation and components
A vector can be written as a column vector:
a=(3−2).\boldsymbol{a}=\begin{pmatrix}3\\-2\end{pmatrix}.a=(3−2).This represents a movement of 333 units in the positive xxx-direction and 222 units in the negative yyy-direction. In three dimensions, a vector has three components:
b=(41−5).\boldsymbol{b}=\begin{pmatrix}4\\1\\-5\end{pmatrix}.b=41−5.The standard unit vectors i\boldsymbol{i}i, j\boldsymbol{j}j and k\boldsymbol{k}k point along the positive xxx, yyy and zzz axes. Therefore,
(41−5)=4i+j−5k.\begin{pmatrix}4\\1\\-5\end{pmatrix} =4\boldsymbol{i}+\boldsymbol{j}-5\boldsymbol{k}.41−5=4i+j−5k.Bold letters such as a\boldsymbol{a}a represent vectors. The notation ∣a∣|\boldsymbol{a}|∣a∣ represents the magnitude of a\boldsymbol{a}a, which is a scalar.
Equality and interpreting vector equations
Two vectors are equal when they have the same magnitude and direction. In component form, this means that their corresponding components must be equal. Their positions on a diagram do not matter, so equal vectors can begin at different points.
For example, if
(2p−1q+3)=(75),\begin{pmatrix}2p-1\\q+3\end{pmatrix} = \begin{pmatrix}7\\5\end{pmatrix},(2p−1q+3)=(75),then equality of the first components gives 2p−1=72p-1=72p−1=7, while equality of the second components gives q+3=5q+3=5q+3=5. Consequently, p=4p=4p=4 and q=2q=2q=2.
This principle is important in geometric proofs. When two vector expressions are equal, you may equate their corresponding coefficients or components to find unknown values. However, you must first express both sides using the same independent vectors. You cannot generally equate coefficients if the vectors used are themselves dependent or if one can be written as a multiple of another.
The zero vector, written 0\boldsymbol{0}0, has every component equal to zero. Its magnitude is 000, and it has no defined direction. This means that a unit vector cannot be formed from 0\boldsymbol{0}0 because division by its magnitude would involve division by zero.
Adding, subtracting and scaling vectors
Vectors are added or subtracted component by component. If
a=(a1a2a3)andb=(b1b2b3),\boldsymbol{a}=\begin{pmatrix}a_1\\a_2\\a_3\end{pmatrix} \quad\text{and}\quad \boldsymbol{b}=\begin{pmatrix}b_1\\b_2\\b_3\end{pmatrix},a=a1a2a3andb=b1b2b3,then
a+b=(a1+b1a2+b2a3+b3).\boldsymbol{a}+\boldsymbol{b} =\begin{pmatrix}a_1+b_1\\a_2+b_2\\a_3+b_3\end{pmatrix}.a+b=a1+b1a2+b2a3+b3.Multiplying by a scalar changes the magnitude and can change the direction. If the scalar is positive, the direction remains the same. If it is negative, the direction reverses.
Worked example: vector arithmetic
Let
a=(2−14),b=(−352).\boldsymbol{a}=\begin{pmatrix}2\\-1\\4\end{pmatrix}, \qquad \boldsymbol{b}=\begin{pmatrix}-3\\5\\2\end{pmatrix}.a=2−14,b=−352.Find 2a−b2\boldsymbol{a}-\boldsymbol{b}2a−b.
First multiply a\boldsymbol{a}a by 222:
2a=(4−28).2\boldsymbol{a}=\begin{pmatrix}4\\-2\\8\end{pmatrix}.2a=4−28.Then subtract corresponding components:
2a−b=(4−28)−(−352)=(7−76).2\boldsymbol{a}-\boldsymbol{b} =\begin{pmatrix}4\\-2\\8\end{pmatrix} -\begin{pmatrix}-3\\5\\2\end{pmatrix} =\begin{pmatrix}7\\-7\\6\end{pmatrix}.2a−b=4−28−−352=7−76.A frequent error is to mishandle the negative first component of b\boldsymbol{b}b. In the first row, 4−(−3)=74-(-3)=74−(−3)=7.
Magnitude, direction and unit vectors
For a two-dimensional vector
a=(xy),\boldsymbol{a}=\begin{pmatrix}x\\y\end{pmatrix},a=(xy),its magnitude is
∣a∣=x2+y2.|\boldsymbol{a}|=\sqrt{x^2+y^2}.∣a∣=x2+y2.In three dimensions,
∣(xyz)∣=x2+y2+z2.\left|\begin{pmatrix}x\\y\\z\end{pmatrix}\right| =\sqrt{x^2+y^2+z^2}.xyz=x2+y2+z2.A unit vector has magnitude 111. The unit vector in the direction of a non-zero vector a\boldsymbol{a}a is
a^=a∣a∣.\widehat{\boldsymbol{a}}=\frac{\boldsymbol{a}}{|\boldsymbol{a}|}.a=∣a∣a.Worked example: finding a unit vector
Find the unit vector in the direction of
p=(2−36).\boldsymbol{p}=\begin{pmatrix}2\\-3\\6\end{pmatrix}.p=2−36.Calculate the magnitude:
∣p∣=22+(−3)2+62=49=7.|\boldsymbol{p}|=\sqrt{2^2+(-3)^2+6^2} =\sqrt{49}=7.∣p∣=22+(−3)2+62=49=7.Divide every component by 777:
p^=17(2−36)=(2/7−3/76/7).\widehat{\boldsymbol{p}} =\frac{1}{7}\begin{pmatrix}2\\-3\\6\end{pmatrix} =\begin{pmatrix}2/7\\-3/7\\6/7\end{pmatrix}.p=712−36=2/7−3/76/7.You can check the result by calculating its magnitude. It should equal 111 exactly.
For a two-dimensional vector, its direction can be found using trigonometry. Take care with the signs of the components because a calculator value of tan−1(y/x)\tan^{-1}(y/x)tan−1(y/x) may need adjustment to place the angle in the correct quadrant.
Position vectors and displacement
The position vector of a point is the vector from the origin to that point. If AAA has coordinates (2,−1,4)(2,-1,4)(2,−1,4), then
OA→=(2−14).\overrightarrow{OA}=\begin{pmatrix}2\\-1\\4\end{pmatrix}.OA=2−14.If the position vectors of AAA and BBB are a\boldsymbol{a}a and b\boldsymbol{b}b, then
AB→=b−a.\overrightarrow{AB}=\boldsymbol{b}-\boldsymbol{a}.AB=b−a.The order matters. To find the vector from AAA to BBB, subtract the position vector of the starting point from the position vector of the finishing point.
Worked example: displacement and distance
The points AAA and BBB have position vectors
a=(14−2),b=(712).\boldsymbol{a}=\begin{pmatrix}1\\4\\-2\end{pmatrix}, \qquad \boldsymbol{b}=\begin{pmatrix}7\\1\\2\end{pmatrix}.a=14−2,b=712.Find AB→\overrightarrow{AB}AB and the distance ABABAB.
AB→=b−a=(712)−(14−2)=(6−34).\overrightarrow{AB}=\boldsymbol{b}-\boldsymbol{a} =\begin{pmatrix}7\\1\\2\end{pmatrix} -\begin{pmatrix}1\\4\\-2\end{pmatrix} =\begin{pmatrix}6\\-3\\4\end{pmatrix}.AB=b−a=712−14−2=6−34.The distance is the magnitude of this displacement vector:
AB=∣AB→∣=62+(−3)2+42=61.AB=|\overrightarrow{AB}| =\sqrt{6^2+(-3)^2+4^2} =\sqrt{61}.AB=∣AB∣=62+(−3)2+42=61.Keep 61\sqrt{61}61 as the exact answer unless the question requests a decimal approximation.
Dividing a line in a ratio
Suppose PPP divides the line segment from AAA to BBB in the ratio AP:PB=m:nAP:PB=m:nAP:PB=m:n. The position vector of PPP is
OP→=na+mbm+n.\overrightarrow{OP}=\frac{n\boldsymbol{a}+m\boldsymbol{b}}{m+n}.OP=m+nna+mb.Another reliable method is to move a fraction of the way from AAA to BBB:
OP→=a+mm+n(b−a).\overrightarrow{OP}=\boldsymbol{a}+\frac{m}{m+n}(\boldsymbol{b}-\boldsymbol{a}).OP=a+m+nm(b−a).Worked example: ratio along a line
Let a\boldsymbol{a}a and b\boldsymbol{b}b be the position vectors of AAA and BBB. Point PPP divides ABABAB so that AP:PB=2:3AP:PB=2:3AP:PB=2:3.
Since PPP is 222 parts through a total of 555 parts,
OP→=a+25(b−a)=35a+25b.\overrightarrow{OP} =\boldsymbol{a}+\frac{2}{5}(\boldsymbol{b}-\boldsymbol{a}) =\frac{3}{5}\boldsymbol{a}+\frac{2}{5}\boldsymbol{b}.OP=a+52(b−a)=53a+52b.A useful check is that PPP is closer to AAA than to BBB. Its expression should therefore contain a greater proportion of a\boldsymbol{a}a.
Parallel vectors, collinearity and geometric proof
Two non-zero vectors are parallel when one is a scalar multiple of the other:
b=λa\boldsymbol{b}=\lambda\boldsymbol{a}b=λafor some scalar λ\lambdaλ. A negative value of λ\lambdaλ means the vectors point in opposite directions, but they are still parallel.
Points AAA, BBB and CCC are collinear if vectors such as AB→\overrightarrow{AB}AB and AC→\overrightarrow{AC}AC are scalar multiples. A complete proof should state the relationship and its geometric consequence.
Worked example: proving points are collinear
Suppose
OA→=(12−1),OB→=(351),OC→=(7115).\overrightarrow{OA}=\begin{pmatrix}1\\2\\-1\end{pmatrix}, \quad \overrightarrow{OB}=\begin{pmatrix}3\\5\\1\end{pmatrix}, \quad \overrightarrow{OC}=\begin{pmatrix}7\\11\\5\end{pmatrix}.OA=12−1,OB=351,OC=7115.Then
AB→=(232)\overrightarrow{AB} =\begin{pmatrix}2\\3\\2\end{pmatrix}AB=232and
AC→=(696)=3AB→.\overrightarrow{AC} =\begin{pmatrix}6\\9\\6\end{pmatrix} =3\overrightarrow{AB}.AC=696=3AB.Therefore, AC→\overrightarrow{AC}AC is a scalar multiple of AB→\overrightarrow{AB}AB, so the vectors are parallel and share point AAA. Hence AAA, BBB and CCC are collinear.
Applying vectors to motion and forces
A vector method is useful whenever direction is part of the information. Displacement describes the change in position, while velocity describes the rate of change of displacement. Acceleration describes the rate of change of velocity. These are vectors because changing direction changes the quantity, even if its magnitude remains constant.
When a question gives several movements or forces, choose a consistent positive direction and write every quantity in component form. Add the vectors to obtain the resultant vector. Its magnitude gives the size of the resultant, while its components or an appropriate angle describe its direction.
Units remain important. Position and displacement may be measured in metres, velocity in metres per second, acceleration in metres per second squared, and force in newtons. Vector calculations do not remove the need to include the correct units in a final answer.
Always interpret the result in context. A negative component does not mean that a magnitude is negative. It means that the vector acts in the negative coordinate direction. The magnitude found using Pythagoras is always non-negative.
Common mistakes in vectors exam questions
- Reversing a displacement: AB→=b−a\overrightarrow{AB}=\boldsymbol{b}-\boldsymbol{a}AB=b−a, not a−b\boldsymbol{a}-\boldsymbol{b}a−b.
- Confusing a vector with its magnitude: a\boldsymbol{a}a is a vector, while ∣a∣|\boldsymbol{a}|∣a∣ is a non-negative scalar.
- Forgetting to square negative components: (−4)2=16(-4)^2=16(−4)2=16, not −16-16−16.
- Dividing only one component: when finding a unit vector, every component must be divided by the magnitude.
- Using decimal answers too early: exact surds and fractions prevent unnecessary rounding errors.
- Claiming vectors are parallel without evidence: show that one complete vector is a single scalar multiple of the other.
- Ignoring direction: vectors with equal magnitudes are not necessarily equal because their directions may differ.
- Giving an incomplete geometric proof: finish by stating what the algebra proves, such as parallel lines or collinear points.
Exam-style vector question with answer
Points AAA, BBB and CCC have position vectors
OA→=(2−13),OB→=(85−1),OC→=(521).\overrightarrow{OA}=\begin{pmatrix}2\\-1\\3\end{pmatrix}, \quad \overrightarrow{OB}=\begin{pmatrix}8\\5\\-1\end{pmatrix}, \quad \overrightarrow{OC}=\begin{pmatrix}5\\2\\1\end{pmatrix}.OA=2−13,OB=85−1,OC=521.- Find AB→\overrightarrow{AB}AB.
- Find the exact length ABABAB.
- Show that CCC is the midpoint of ABABAB.
- Find a unit vector in the direction from AAA to BBB.
Answer
First,
AB→=OB→−OA→=(66−4).\overrightarrow{AB}=\overrightarrow{OB}-\overrightarrow{OA} =\begin{pmatrix}6\\6\\-4\end{pmatrix}.AB=OB−OA=66−4.Therefore,
AB=62+62+(−4)2=88=222.AB=\sqrt{6^2+6^2+(-4)^2} =\sqrt{88}=2\sqrt{22}.AB=62+62+(−4)2=88=222.The midpoint of AAA and BBB has position vector
12(a+b)=12(1042)=(521).\frac{1}{2}(\boldsymbol{a}+\boldsymbol{b}) =\frac{1}{2}\begin{pmatrix}10\\4\\2\end{pmatrix} =\begin{pmatrix}5\\2\\1\end{pmatrix}.21(a+b)=211042=521.This is OC→\overrightarrow{OC}OC, so CCC is the midpoint of ABABAB.
Finally, divide AB→\overrightarrow{AB}AB by its magnitude:
AB→∣AB→∣=1222(66−4)=122(33−2).\frac{\overrightarrow{AB}}{|\overrightarrow{AB}|} =\frac{1}{2\sqrt{22}}\begin{pmatrix}6\\6\\-4\end{pmatrix} =\frac{1}{\sqrt{22}}\begin{pmatrix}3\\3\\-2\end{pmatrix}.∣AB∣AB=222166−4=22133−2.Try 4 more vectors exam questions, then use the worked solutions to compare your method as well as your final answer.
How to revise vectors effectively
Begin by learning the small number of central relationships, particularly
AB→=b−a,∣a∣=a12+a22+a32,a^=a∣a∣.\overrightarrow{AB}=\boldsymbol{b}-\boldsymbol{a}, \qquad |\boldsymbol{a}|=\sqrt{a_1^2+a_2^2+a_3^2}, \qquad \widehat{\boldsymbol{a}}=\frac{\boldsymbol{a}}{|\boldsymbol{a}|}.AB=b−a,∣a∣=a12+a22+a32,a=∣a∣a.Next, practise short component calculations before attempting longer geometric proofs. In a proof question, write each displacement explicitly, simplify it and then identify the scalar multiple or ratio that establishes the required result.
The MathsGenie A-level vectors revision lesson collects lessons, practice material and worked solutions. The accompanying vectors video lessons can help if you need to see the notation and reasoning modelled before attempting questions independently.
AS students can use the MathsGenie AS vectors questions, while OCR students can select questions from the OCR A-level vectors question bank. After topic practice, use full past papers and mark schemes to practise recognising vectors when they appear among unrelated topics.
The separate guide to GCSE Maths topics by exam board and tier is useful if gaps in GCSE vector notation or geometric reasoning are affecting your A-level work, although A-level students should use the A-level question banks for their main exam preparation.
Conclusion
Strong A-level vector work depends on careful notation, accurate component arithmetic and clear geometric conclusions. Remember that displacement is finishing position minus starting position, distance is the magnitude of displacement, and parallel vectors must be scalar multiples.
Use the MathsGenie revision lesson to review each method, then complete vectors exam questions without looking at the solution. Finish with mixed past-paper practice and mark schemes so that you can apply the same ideas in unfamiliar contexts.
Sources and referenced URLs
- https://mathsgenie.co.uk/a-level/maths/edexcel
- https://mathsgenie.co.uk/a-level/maths/edexcel/a-level-pure-mathematics-12-vectors
- https://mathsgenie.co.uk/a-level/maths/edexcel/a-level-pure-mathematics-12-vectors/videos
- https://mathsgenie.co.uk/a-level/maths/edexcel/a-level-pure-mathematics-12-vectors/questions/q1
- https://mathsgenie.co.uk/as-level/maths/edexcel/as-pure-mathematics-11-vectors/questions/q1
- https://mathsgenie.co.uk/a-level/maths/ocr/vectors/questions/q1
- https://mathsgenie.co.uk/blog/gcse-maths-topics-by-exam-board-and-tier



