Multiplying Decimals GCSE Maths: Examples and Practice
Multiplying decimals GCSE maths explained with clear worked examples, decimal-place checks and exam-style practice to help you avoid common mistakes today.

Imagine a student who can multiply whole numbers confidently, yet keeps losing their way when decimals appear. They calculate the right digits, then guess where the decimal point belongs. If that sounds familiar, this multiplying decimals GCSE maths guide gives you a reliable method: multiply as whole numbers, restore the combined number of decimal places, then check the size of your answer.
The turning point comes when you understand why that method works. A decimal point stops feeling like something to guess and becomes part of a calculation you can explain.
The multiplying decimals checklist
For a multiplication involving decimals:
- Estimate the answer before calculating.
- Multiply the numbers as though they were whole numbers.
- Count the decimal places in both original numbers altogether.
- Give the whole-number product that many decimal places, adding placeholder zeros if necessary.
- Check that your answer fits your estimate.
Keep your whole-number multiplication visible. It helps you check whether a mistake came from the arithmetic or from placing the decimal point.
MathsGenie's Multiplication and Division lesson covers the matching GCSE topic, including calculations with decimals.
Why the decimal-place rule works
Suppose our hypothetical student is calculating 2.4×0.32.4 \times 0.32.4×0.3. They know that 24×3=7224 \times 3 = 7224×3=72, but hesitate between 7.27.27.2 and 0.720.720.72.
Look at what changed. Replacing 2.42.42.4 with 242424 makes the first number ten times larger. Replacing 0.30.30.3 with 333 makes the second number ten times larger too. The resulting product is therefore a hundred times larger than it should be.
To undo both changes:
2.4×0.3=24×3100=72100=0.722.4 \times 0.3 = \frac{24 \times 3}{100} = \frac{72}{100} = 0.722.4×0.3=10024×3=10072=0.72That is why you count decimal places across both numbers. Each place represents a factor of ten that must be restored afterwards.
There is a useful size check here too. Multiplying a positive number by a number between 000 and 111 makes it smaller. Since 0.30.30.3 is less than 111, the answer must be less than 2.42.42.4. The answer 7.27.27.2 cannot be right.
If tenths and hundredths still feel uncertain, MathsGenie's Place Value practice booklet addresses the underlying skill.
Multiplying decimals worked examples
A decimal multiplied by a whole number
Calculate 3.7×63.7 \times 63.7×6.
First, estimate. Since 3.73.73.7 is close to 444, an answer near 242424 is sensible.
Next, multiply using whole numbers:
37×6=22237 \times 6 = 22237×6=222Finally, restore the decimal place. There is one decimal place in 3.73.73.7 and none in 666, so the product needs one decimal place:
3.7×6=22.23.7 \times 6 = 22.23.7×6=22.2The answer is slightly below 242424, which fits the estimate.
For our imagined student, the useful habit is writing the decimal-place count before giving the final answer. It replaces a last-second guess with a clear decision.
Two decimals multiplied together
Calculate 1.24×0.61.24 \times 0.61.24×0.6.
First, check the likely size. Taking six tenths of 1.241.241.24 should give a positive answer smaller than 1.241.241.24.
Multiply the whole numbers:
124×6=744124 \times 6 = 744124×6=744Count the original decimal places. There are two in 1.241.241.24 and one in 0.60.60.6, giving three altogether.
1.24×0.6=0.7441.24 \times 0.6 = 0.7441.24×0.6=0.744An answer of 7.447.447.44 would fail the size check immediately. This is where the method starts to click: the arithmetic gives the digits, while place value determines their size.
Use the Lessons and Question Bank to practise this same multiply, restore and check routine with further decimal questions.
A calculation needing placeholder zeros
Calculate 0.04×0.30.04 \times 0.30.04×0.3.
Multiply the whole numbers:
4×3=124 \times 3 = 124×3=12Count the decimal places. There are two in 0.040.040.04 and one in 0.30.30.3, so the product needs three decimal places.
The digits 121212 alone are not enough to fill those places. Insert a placeholder zero:
0.04×0.3=0.0120.04 \times 0.3 = 0.0120.04×0.3=0.012Check the size: three tenths of 0.040.040.04 must be smaller than 0.040.040.04. The answer 0.120.120.12 would be too large.
Common mistakes when multiplying decimals
Counting only one number's decimal places
In 1.24×0.61.24 \times 0.61.24×0.6, counting only the two places in 1.241.241.24 produces the wrong answer. Write each count separately, then add them before placing the decimal point.
Lining up decimal points as if adding
For addition and subtraction, matching place-value columns is essential. In this multiplication method, you calculate the whole-number product first and restore its scale afterwards. Align the whole numbers correctly for multiplication rather than borrowing the addition rule.
Assuming multiplication always makes numbers bigger
That belief can make a correct answer feel suspicious. Multiplying by a positive number below 111 takes a fraction of the original amount. Ask whether your multiplier represents several lots or part of one lot.
Forgetting zeros or rounding too early
Zeros between the decimal point and the first non-zero digit affect value: 0.0120.0120.012 and 0.120.120.12 are different numbers. Keep the exact product unless the question asks you to round. A final zero can sometimes be removed without changing value, so 1.20=1.21.20 = 1.21.20=1.2.
Multiplying decimals questions: exam-style practice
Try these without a calculator. Show your whole-number calculation and decimal-place count before checking the answers. These are practice questions written for this guide, rather than quoted past-paper questions.
| Question | Calculation or task |
|---|---|
| A | Calculate 4.6×74.6 \times 74.6×7. |
| B | Calculate 2.3×0.42.3 \times 0.42.3×0.4. |
| C | Calculate 0.07×0.80.07 \times 0.80.07×0.8. |
| D | Calculate 1.25×2.41.25 \times 2.41.25×2.4. |
| E | Ribbon costs £2.40\pounds 2.40£2.40 per metre. Calculate the cost of 1.51.51.5 metres. |
For the ribbon question, first decide which operation connects the price per metre to the length. Include the currency in your final answer.
Answers and checks
| Question | Answer | Useful check |
|---|---|---|
| A | 32.232.232.2 | Slightly less than 5×7=355 \times 7 = 355×7=35. |
| B | 0.920.920.92 | Less than 2.32.32.3, because 0.4<10.4 < 10.4<1. |
| C | 0.0560.0560.056 | Three decimal places, and less than 0.070.070.07. |
| D | 333 | 125×24=3000125 \times 24 = 3000125×24=3000, then restore three decimal places. |
| E | £3.60\pounds 3.60£3.60 | One metre costs £2.40\pounds 2.40£2.40; half a metre costs £1.20\pounds 1.20£1.20. |
If an answer differs, identify the first incorrect step. Was the whole-number multiplication wrong, the decimal-place count wrong, or the size check missing? MathsGenie's Multiplication and Division revision guide provides another explanation to compare with your working.
Turn the method into a habit
Our hypothetical student's breakthrough is modest but useful: they can now explain where the decimal point belongs. Your next step is making that explanation reliable when the numbers change. Start with MathsGenie's Multiplication and Division Lessons, then practise the multiply, restore and check method in the Question Bank.



