MathsGenie logo
RevisionResourcesBlog
  1. Home
  2. /
  3. Blog
  4. /
  5. Friction A Level Maths: Revision and Exam Questions

Friction A Level Maths: Revision and Exam Questions

Revise friction A Level Maths with clear theory, worked examples, common mistakes, exam questions, answers and practical mechanics exam technique.

MathsGenie Team
•Last updated: 20 Nov 2026
Share
Add as a preferred source on Google

Friction in A Level Maths is modelled as a force that opposes motion, or the tendency to move, between surfaces in contact. The central relationship is F≤μRF\leq \mu RF≤μR, with equality when friction is limiting or when the particle is moving under the standard model.

This guide explains the model step by step, including equilibrium, limiting friction, motion on rough surfaces and inclined planes. It also includes friction worked examples, common mistakes and exam-style questions with answers.

The A Level Maths friction model

Friction acts parallel to the contact surface. Its direction opposes the particle's actual motion or the direction in which it would move if there were no friction.

The standard model is

F≤μR F\leq \mu R F≤μR

where:

  • FFF is the magnitude of the frictional force, measured in newtons
  • μ\muμ is the coefficient of friction, with no units
  • RRR is the normal reaction force, measured in newtons

The word normal means perpendicular to the surface. On a horizontal surface with no other vertical forces, R=mgR=mgR=mg. However, this is not automatically true on a slope or when another force has a vertical component.

Static friction

If a particle is stationary, friction adjusts to the value needed to maintain equilibrium, provided that this does not exceed its maximum possible value:

0≤F≤μR 0\leq F\leq \mu R 0≤F≤μR

For example, if horizontal equilibrium requires a frictional force of 12 N12\text{ N}12 N and μR=20 N\mu R=20\text{ N}μR=20 N, then F=12 NF=12\text{ N}F=12 N. Friction is not automatically 20 N20\text{ N}20 N.

Limiting friction

When a particle is on the point of slipping, friction has reached its limiting value:

F=μR F=\mu R F=μR

This condition is often described as limiting equilibrium. The particle is still at rest, but any further increase in the force tending to move it would cause motion.

Friction during motion

In the standard A Level model, a particle sliding across a rough surface experiences friction of magnitude

F=μR F=\mu R F=μR

The force acts opposite to the direction of motion. Newton's second law can then be applied in the direction of motion using

∑F=ma. \sum F=ma. ∑F=ma.

This distinction matters because F=μRF=\mu RF=μR cannot normally be assumed for a stationary particle unless it is stated or established that the particle is on the point of moving.

A reliable method for friction exam questions

Most friction exam questions can be organised into the following steps.

  1. Draw or interpret the force diagram. Include weight mgmgmg, the normal reaction RRR, friction FFF, tension, thrust or any applied force.
  2. Decide the direction of friction. Ask which way the particle is moving or would tend to move.
  3. Resolve perpendicular to the surface. This usually provides an equation for RRR.
  4. Choose the correct friction relationship. Use F≤μRF\leq \mu RF≤μR in general, and F=μRF=\mu RF=μR only for limiting friction or sliding motion under the model.
  5. Resolve parallel to the surface. Use equilibrium equations if the acceleration is zero, or ∑F=ma\sum F=ma∑F=ma if the particle accelerates.
  6. Check the result against the model. A calculated static friction force must satisfy F≤μRF\leq \mu RF≤μR.

Students can review these skills through the MathsGenie Forces and Friction lesson and the wider Forces and Friction revision resources.

Friction worked examples

Worked example 1: equilibrium on a horizontal surface

A particle of mass 8 kg8\text{ kg}8 kg rests on a rough horizontal surface. A horizontal force of 18 N18\text{ N}18 N acts on it. The coefficient of friction is 0.30.30.3. Determine the frictional force and establish whether the particle remains at rest. Take g=9.8 m s−2g=9.8\text{ m s}^{-2}g=9.8 m s−2.

There is no vertical acceleration, so

R=8g=78.4 N. R=8g=78.4\text{ N}. R=8g=78.4 N.

The limiting friction is

μR=0.3(78.4)=23.52 N. \mu R=0.3(78.4)=23.52\text{ N}. μR=0.3(78.4)=23.52 N.

Only 18 N18\text{ N}18 N of friction is needed to balance the applied force. Since

18<23.52, 18<23.52, 18<23.52,

the available friction is sufficient. Therefore,

F=18 N F=18\text{ N} F=18 N

and the particle remains at rest. The friction is not limiting.

Worked example 2: acceleration across a rough surface

A particle of mass 5 kg5\text{ kg}5 kg is moving across a rough horizontal surface. It is pulled horizontally by a force of 22 N22\text{ N}22 N. The coefficient of friction is 0.250.250.25. Find its acceleration, taking g=9.8 m s−2g=9.8\text{ m s}^{-2}g=9.8 m s−2.

Vertically, the particle is in equilibrium:

R=5g=49 N. R=5g=49\text{ N}. R=5g=49 N.

Because the particle is moving, the friction has magnitude

F=μR=0.25(49)=12.25 N. F=\mu R=0.25(49)=12.25\text{ N}. F=μR=0.25(49)=12.25 N.

Taking the direction of motion as positive and applying Newton's second law,

22−12.25=5a. 22-12.25=5a. 22−12.25=5a.

Therefore,

a=1.95 m s−2. a=1.95\text{ m s}^{-2}. a=1.95 m s−2.

The subtraction is essential because friction opposes the motion.

Worked example 3: limiting equilibrium on a slope

A particle rests on a rough plane inclined at 20∘20^\circ20∘ to the horizontal. It is on the point of sliding down the plane. Find the coefficient of friction.

Resolve perpendicular to the plane:

R=mgcos⁡20∘. R=mg\cos20^\circ. R=mgcos20∘.

The particle is about to move down the plane, so friction acts up the plane. As the equilibrium is limiting,

F=μR. F=\mu R. F=μR.

Resolving parallel to the plane gives

F=mgsin⁡20∘. F=mg\sin20^\circ. F=mgsin20∘.

Substituting for FFF and RRR:

mgsin⁡20∘=μmgcos⁡20∘. mg\sin20^\circ=\mu mg\cos20^\circ. mgsin20∘=μmgcos20∘.

Hence

μ=tan⁡20∘≈0.364. \mu=\tan20^\circ\approx0.364. μ=tan20∘≈0.364.

The mass cancels, so the result depends only on the angle in this particular model.

Applied forces at an angle

An angled pulling or pushing force changes the normal reaction and therefore changes the limiting friction.

Suppose a force PPP pulls a particle at an angle α\alphaα above a horizontal surface. Its upward component is Psin⁡αP\sin\alphaPsinα, so vertical equilibrium gives

R+Psin⁡α=mg, R+P\sin\alpha=mg, R+Psinα=mg,

or

R=mg−Psin⁡α. R=mg-P\sin\alpha. R=mg−Psinα.

Pulling upwards reduces RRR and therefore reduces μR\mu RμR. By contrast, a force directed downwards into the surface increases RRR, creating a larger frictional force when friction is limiting.

A frequent error is to write R=mgR=mgR=mg before considering the vertical component of the applied force. Always resolve perpendicular to the surface before calculating friction.

Embedded friction exam question

A crate of mass 6 kg6\text{ kg}6 kg is pulled up a rough plane inclined at 30∘30^\circ30∘ to the horizontal. The coefficient of friction is 0.20.20.2, and the pulling force PPP acts parallel to the plane. The crate accelerates up the plane at 1.5 m s−21.5\text{ m s}^{-2}1.5 m s−2. Find PPP, taking g=9.8 m s−2g=9.8\text{ m s}^{-2}g=9.8 m s−2.

Because the crate moves up the plane, friction acts down the plane. Perpendicular to the plane,

R=6gcos⁡30∘. R=6g\cos30^\circ. R=6gcos30∘.

Therefore,

F=μR=0.2(6gcos⁡30∘). F=\mu R=0.2(6g\cos30^\circ). F=μR=0.2(6gcos30∘).

Resolving up the plane and applying Newton's second law:

P−6gsin⁡30∘−0.2(6gcos⁡30∘)=6(1.5). P-6g\sin30^\circ-0.2(6g\cos30^\circ)=6(1.5). P−6gsin30∘−0.2(6gcos30∘)=6(1.5).

This gives

P≈48.6 N. P\approx48.6\text{ N}. P≈48.6 N.

Try 4 more friction practice questions, with worked solutions and mark schemes showing how marks are awarded.

Further friction exam questions

Question 1

A 10 kg10\text{ kg}10 kg particle rests on a rough horizontal surface with coefficient of friction 0.40.40.4. A horizontal force of 25 N25\text{ N}25 N is applied. Find the frictional force and state whether it is limiting. Take g=9.8 m s−2g=9.8\text{ m s}^{-2}g=9.8 m s−2.

Answer: R=98 NR=98\text{ N}R=98 N and μR=39.2 N\mu R=39.2\text{ N}μR=39.2 N. The required friction is 25 N25\text{ N}25 N, which is below the limiting value. Therefore F=25 NF=25\text{ N}F=25 N and the friction is not limiting.

Question 2

A 3 kg3\text{ kg}3 kg particle slides down a plane inclined at 25∘25^\circ25∘ to the horizontal. The coefficient of friction is 0.30.30.3. Find its acceleration down the plane.

Answer:

a=g(sin⁡25∘−0.3cos⁡25∘)≈1.48 m s−2. a=g(\sin25^\circ-0.3\cos25^\circ)\approx1.48\text{ m s}^{-2}. a=g(sin25∘−0.3cos25∘)≈1.48 m s−2.

Question 3

A particle of mass 12 kg12\text{ kg}12 kg is pulled by a force PPP acting at 30∘30^\circ30∘ above a rough horizontal surface. The coefficient of friction is 0.350.350.35. The particle is on the point of moving. Find PPP.

Answer: Vertical equilibrium gives R=117.6−Psin⁡30∘R=117.6-P\sin30^\circR=117.6−Psin30∘. Horizontal limiting equilibrium gives

Pcos⁡30∘=0.35(117.6−Psin⁡30∘), P\cos30^\circ=0.35(117.6-P\sin30^\circ), Pcos30∘=0.35(117.6−Psin30∘),

so

P≈39.5 N. P\approx39.5\text{ N}. P≈39.5 N.

Board-specific practice is also available for AQA A Level friction, OCR coefficient of friction and CCEA A Level friction.

Common mistakes in friction questions

Assuming friction is always μR\mu RμR

For a stationary particle, friction takes the value required for equilibrium, up to a maximum of μR\mu RμR. Equality applies when the particle is on the point of slipping or is already sliding under the standard model.

Choosing the wrong direction

Friction does not necessarily oppose an applied force. It opposes motion or impending motion. On a slope, a sufficiently large upward force may make the particle tend to move up, in which case friction acts down the slope.

Treating the reaction as mgmgmg

The equation R=mgR=mgR=mg applies only in suitable horizontal situations. On an inclined plane without other perpendicular forces, R=mgcos⁡θR=mg\cos\thetaR=mgcosθ. An angled pull or push changes it again.

Resolving weight incorrectly

On a plane inclined at θ\thetaθ to the horizontal, the weight components are

mgsin⁡θ mg\sin\theta mgsinθ

parallel to the plane and

mgcos⁡θ mg\cos\theta mgcosθ

perpendicular to the plane. The parallel component acts down the slope.

Mixing equilibrium and dynamics

For equilibrium, the resultant force is zero. For an accelerating particle, use ∑F=ma\sum F=ma∑F=ma. Do not balance forces when the question states that the particle accelerates.

Rounding too early

Keep exact trigonometric values and unrounded calculator results during the calculation. Round only the final answer to the accuracy requested, or normally to three significant figures if no instruction is given and the data supports it.

How to improve at friction exam questions

Begin with questions involving horizontal surfaces, then progress to inclined planes and angled forces. For every solution, label the direction chosen as positive and write a separate equation perpendicular to the surface before resolving parallel to it.

After topic practice, use past papers and predicted papers under timed conditions. Check the mark scheme carefully, particularly for marks awarded for RRR, the correct direction of friction, the use of F=μRF=\mu RF=μR and a valid application of Newton's second law.

Friction is an A Level mechanics topic, but students reviewing earlier course structures can consult the GCSE Maths topics by exam board and tier. This helps distinguish GCSE content from the more advanced coefficient of friction and limiting equilibrium models used at A Level.

Conclusion

The essential decision in friction A Level Maths is whether friction is adjusting below its limiting value or has reached F=μRF=\mu RF=μR. Resolve perpendicular to the surface first, determine the direction of friction, and then use equilibrium or ∑F=ma\sum F=ma∑F=ma parallel to the surface.

MathsGenie lessons can be used to review the method before attempting practice questions, past papers and mark schemes. The most useful next step is to complete the topic question set and check every force equation against the worked solutions.

Sources and referenced URLs

  • https://mathsgenie.co.uk/a-level/maths/edexcel/a-level-mechanics-2-forces-and-friction/lessons
  • https://mathsgenie.co.uk/a-level/maths/edexcel/a-level-mechanics-2-forces-and-friction
  • https://mathsgenie.co.uk/a-level/maths/edexcel/a-level-mechanics-friction/questions/q1
  • https://mathsgenie.co.uk/a-level/maths/aqa/friction/questions/q23
  • https://mathsgenie.co.uk/a-level/maths/ocr/coefficient-of-friction/questions
  • https://mathsgenie.co.uk/a-level/maths/ccea/a-level-mechanics-friction/questions
  • https://mathsgenie.co.uk/blog/gcse-maths-topics-by-exam-board-and-tier
  • The A Level Maths friction model
  • A reliable method for friction exam questions
  • Friction worked examples
  • Applied forces at an angle
  • Embedded friction exam question
  • Further friction exam questions
  • Common mistakes in friction questions
  • How to improve at friction exam questions
  • Conclusion
  • Sources and referenced URLs

Frequently Asked Questions

How helpful was this article?
Add as a preferred source on Google

More from the blog

20 Nov 2026

Projectiles A Level Maths Revision Guide

Revise projectiles for A-level Maths with clear methods, worked examples, common mistakes and exam-style questions with fully explained answers.

20 Nov 2026

Graph Sketching and Transformations A Level Maths

Revise A-level graph sketching and transformations with clear rules, worked examples, common mistakes, exam-style questions, answers and practical tips.

20 Nov 2026

Sequences and Recurrence Relations A-level Maths

Revise sequences and recurrence relations for A-level Maths with clear methods, worked examples, common mistakes and exam-style questions with answers.

20 Nov 2026

Hardest GCSE Maths Circle Theorems Questions

Learn how to solve the hardest GCSE Maths circle theorems questions with clear Higher tier worked examples, practice questions and answers.

1m+ Students Can't Be Wrong

What GCSE and A-level students say after revising with MathsGenie.

Harvey B. avatar

Harvey B.

Student

“This is such an amazing platform, it offers everything needed to improve your grade in a time efficient manor. Personally I love the videos as I am able to find areas that I am weak at in the practice papers.”
Tameem R. avatar

Tameem R.

Student

“Genuinely took me from a grade 4 in maths to achieving a grade 8 in my GCSE's in less than a few months. Best mathematics revision website for those who are aiming to get those high grades.”
Anyim P. avatar

Anyim P.

Student

“Genuinely I think every maths student should have this site. It takes you through the entire AS and A level Maths course, alongside exam questions with step by step solutions.”
Muhammad A. avatar

Muhammad A.

Student

“predicted papers are very useful and i believe there's not a better website for GCSE maths in the UK”
Rayan K. avatar

Rayan K.

Student

“Best Maths Resource out there! Absolutely amazing videos and very concise explantions on everything. Don't even get me started on the loads of exam question/worksheets that are so helpful. And it's all free!”
Dee avatar

Dee

Student

“The best Maths resource site in the world! They have it all and do a great job of keeping everything up to date. I still don't know how they are able to make this free for all. You are truly amazing.”
Hamid I. avatar

Hamid I.

Student

“They have helped me with my A level Maths performance significantly and I jumped from a grade U to a Grade A in only 2-3 months. I HIGHLY recommend to Maths students especially for A level.”
Sophie avatar

Sophie

Student

“MathsGenie's YouTube videos and worksheets are amazing. The videos go into such great depth but in a way that's simple to understand.”
Maria E. avatar

Maria E.

Student

“Amazing website! Truly helped with my GCSEs - I was a very poor student. Managed to go up and reach all grade 6-9's from U-4's. Would definitely recommend :)”
Justine K. avatar

Justine K.

Student

“Absolutely brilliant website with well organised, well written resources for learning or revising maths. I never hesitate to recommend mathsgenie to my students.”
Daryl G. avatar

Daryl G.

Student

“Took me a bit of getting used to but this new site is excellent. I found the old one really useful but this is next level. I share it with all my colleagues and students.”
Binuk J. avatar

Binuk J.

Student

“I used to be really bad at math. My first GCSE mocks I had a 2 but after I found MathsGenie I jumped from 2 to 4 under 3 months.”
Jourdie avatar

Jourdie

Student

“Improved my grade, I used to be borderline passing maths now I'm performing much better. There are videos, practice papers, solutions, exam questions, past GCSE papers all for free. This is really useful.”
Olla avatar

Olla

Student

“Honestly, it's super great. Easy, with the explanation on the side. Every topic also has more than 50 questions, making you feel more confident in doing different types f question in one topic. Try it!”

Ready to breeze through your GCSEs?IGCSEs?A-Levels?AS Levels?GCSEs?GCSEs?

Sign inStart studying for free

Footer

Quick links

  • GCSE past papers
  • GCSE question bank
  • GCSE worksheets
  • GCSE revision guides
  • GCSE lessons
  • Literary Hub
  • Free maths course
  • A Level past papers
  • A Level question bank
  • Old MathsGenie

Tools

  • Revision planner
  • Mock exam builder
  • Ask Genie AI
  • Answer marking
  • Grade calculator
  • Pricing

Company

  • About MathsGenie
  • Maths Genie on Google Play
  • Careers
  • Contact
  • For educators
  • For parents
  • Student ambassadors
  • More resources
  • Blog
  • Student questions
  • Sitemap
  • Privacy policy
  • Terms of Service
  • Cookie policy
  • Report a bug

GCSE

  • Biology
  • Chemistry
  • English Language
  • English Literature
  • Geography
  • Maths
  • Old Maths
  • Physics
  • Statistics

IGCSE

  • Biology
  • Business
  • Chemistry
  • Computer Science
  • English Language
  • English Literature
  • Geography
  • Maths
  • Physics

A Level

  • Biology
  • Business
  • Chemistry
  • Economics
  • Maths
  • Old Maths
  • Physics
  • Psychology
  • Sociology

AS Level

  • Biology
  • Business
  • Chemistry
  • Economics
  • Maths
  • Physics
  • Psychology
  • Religious Studies
  • Sociology
MathsGenie logo

© 2026 MyDojo, Inc. All rights reserved. MyDojo, Inc. does business as MathsGenie.

Exam board names are used for identification only and do not imply affiliation or endorsement.