Edexcel GCSE Maths Higher Topics List (1MA1)
Complete Edexcel GCSE Maths Higher topics checklist for 1MA1, grouped by specification strand, with Higher-only content and practice links.

Edexcel GCSE Maths Higher Topics List (1MA1)
The Edexcel GCSE Maths Higher topics cover all Foundation content plus additional material intended for grades 4-9. Pearson Edexcel organises the 1MA1 specification into six strands: Number, Algebra, Ratio, Proportion and Rates of Change, Geometry and Measures, Probability, and Statistics.
This checklist follows the official specification structure. Content marked Higher only is identified as Higher-tier content in the specification. Unmarked content can also be assessed on Foundation tier, but Higher questions may use it in more demanding, multi-step contexts.
For a comparison with other specifications, see GCSE Maths topics by exam board and tier.
How the Edexcel GCSE Maths Higher specification works
Edexcel GCSE Mathematics A, qualification code 1MA1, is a linear qualification. Students take three papers at the end of the course:
- Paper 1: non-calculator
- Paper 2: calculator
- Paper 3: calculator
Each paper can assess content from any strand. A topic is therefore not restricted to one particular paper, apart from the practical difference created by calculator availability.
Higher-tier papers target grades 4-9, with grade 3 available as an allowed grade below the tier’s normal range. Students must be prepared to combine topics, explain reasoning and apply familiar mathematics in unfamiliar situations.
The official Higher-tier assessment weightings are:
| Strand | Approximate weighting |
|---|---|
| Number | 12-18% |
| Algebra | 27-33% |
| Ratio, proportion and rates of change | 17-23% |
| Geometry and measures | 17-23% |
| Probability and statistics combined | 12-18% |
These are qualification-level ranges, not promises for an individual paper. Algebra has the largest weighting, but every strand must be revised.
Number topics
Number includes calculation skills, fractions, indices, accuracy and exact values. These skills also appear throughout algebra, geometry, probability and statistics.
Structure and calculation
- Order positive and negative integers, decimals and fractions.
- Use the symbols ===, ≠\ne=, <<<, >>>, ≤\leq≤ and ≥\geq≥.
- Apply the four operations to integers, decimals, fractions and mixed numbers.
- Understand place value and use it when calculating with decimals.
- Use inverse operations to check answers.
- Follow the order of operations, including brackets, powers and roots.
- Recognise and use prime numbers, factors, multiples, common factors and common multiples.
- Find the highest common factor and lowest common multiple.
- Write an integer as a product of prime factors.
- Use prime factorisation to find an HCF or LCM.
- Use systematic listing strategies to identify all possible outcomes or arrangements.
Powers, roots, indices and surds
- Use positive integer powers and associated roots.
- Recognise square, cube and higher powers.
- Estimate powers and roots of positive numbers.
- Calculate with integer indices.
- Use the index laws for multiplication, division and powers of powers.
- Use zero and negative indices. Higher only
- Use fractional indices. Higher only
- Calculate exactly with surds. Higher only
- Simplify expressions involving surds. Higher only
- Rationalise a denominator. Higher only
- Write and calculate with numbers in standard form, A×10nA\times10^nA×10n, where 1≤A<101\leq A<101≤A<10.
Fractions, decimals and percentages
- Convert between fractions, decimals and percentages.
- Work with terminating decimals and recurring decimals.
- Convert a recurring decimal to an exact fraction. Higher only
- Compare quantities using fractions and percentages.
- Interpret a fraction or percentage as an operator.
- Find percentages of amounts.
- Calculate percentage increases and decreases.
- Work with percentages greater than 100%100\%100%.
- Find an original amount after a percentage change.
- Solve simple and compound interest problems.
- Understand repeated percentage change, including depreciation and growth.
Estimation and accuracy
- Round numbers to decimal places and significant figures.
- Estimate calculations by rounding values appropriately.
- Check whether an answer is reasonable using estimation.
- Use inequality notation to describe error intervals.
- Find upper and lower bounds for rounded measurements.
- Apply and interpret bounds in calculations. Higher only
Practise Number: Use the Edexcel GCSE Maths revision and topic practice page to select Number lessons and exam questions.
Algebra topics
Algebra has the greatest weighting on Higher tier. Students need to manipulate expressions confidently as well as solve equations, interpret graphs, use sequences and construct proofs.
Algebraic notation and manipulation
- Use standard algebraic notation, including coefficients, powers, products and fractions.
- Substitute numerical values into expressions and formulae.
- Understand expressions, equations, formulae, identities, inequalities, terms and factors.
- Simplify expressions by collecting like terms.
- Multiply a single term over a bracket.
- Take out common factors.
- Expand two binomials.
- Factorise quadratic expressions, including the difference of two squares.
- Simplify expressions using the laws of indices.
- Simplify and manipulate algebraic fractions. Higher only
- Add, subtract, multiply and divide algebraic fractions. Higher only
- Know the difference between an equation and an identity.
- Prove algebraic identities.
Formulae and functions
- Substitute into formulae, including scientific formulae.
- Rearrange formulae to change the subject.
- Rearrange formulae when the required variable appears more than once. Higher only
- Interpret expressions as functions with inputs and outputs.
- Use function notation. Higher only
- Find and use inverse functions. Higher only
- Form and use composite functions. Higher only
- Translate a situation into an algebraic expression, equation or formula.
Coordinates and graphs
- Use coordinates in all four quadrants.
- Plot and interpret straight-line graphs.
- Understand and use y=mx+cy=mx+cy=mx+c.
- Find and interpret gradients and intercepts.
- Find equations of straight lines.
- Identify parallel lines from their gradients.
- Find equations of perpendicular lines. Higher only
- Recognise and use the equation of a circle centred at the origin. Higher only
- Find the equation of a tangent to a circle at a given point. Higher only
- Plot and interpret quadratic graphs.
- Identify roots, intercepts and turning points from a quadratic graph.
- Recognise cubic and reciprocal graphs.
- Recognise exponential graphs. Higher only
- Recognise graphs of trigonometric functions. Higher only
- Interpret gradients and intercepts in real-life graphs.
- Find approximate gradients of curves.
- Estimate areas under graphs.
- Interpret the gradient of a curve as an instantaneous rate of change. Higher only
- Understand the connection between gradients and rates of change. Higher only
- Transform graphs of functions, including translations and reflections. Higher only
Equations and inequalities
- Solve linear equations, including equations with brackets and unknowns on both sides.
- Solve quadratic equations by factorisation.
- Solve quadratic equations using the quadratic formula. Higher only
- Solve quadratic equations by completing the square. Higher only
- Rearrange an equation into quadratic form before solving. Higher only
- Find approximate solutions using graphs.
- Interpret roots as intersections of lines and curves.
- Solve two simultaneous linear equations algebraically and graphically.
- Solve simultaneous equations involving one linear and one quadratic equation. Higher only
- Solve linear inequalities and show solutions on a number line.
- Represent and interpret inequalities on graphs.
- Solve quadratic inequalities. Higher only
- Find approximate solutions to equations using iteration. Higher only
Sequences and proof
- Generate sequences from term-to-term and position-to-term rules.
- Recognise arithmetic, geometric, Fibonacci-type, quadratic, triangular, square and cube sequences.
- Find and use the nnnth term of a linear sequence.
- Find and use the nnnth term of a quadratic sequence. Higher only
- Continue geometric sequences and recognise common ratios.
- Deduce expressions for terms in a sequence.
- Construct algebraic arguments.
- Use algebra to prove results about integers, multiples, parity and consecutive numbers.
- Show that a statement is false by giving a counterexample.
Practise Algebra: Choose an Algebra lesson from Edexcel GCSE Maths revision, then answer the accompanying exam-style questions.
Ratio, proportion and rates of change topics
This strand links numerical methods with algebra. Higher questions frequently combine ratio or proportion with percentages, geometry, graphs and compound units.
Ratio and proportional reasoning
- Express one quantity as a fraction of another.
- Use ratio notation and simplify ratios.
- Divide a quantity in a given ratio.
- Write ratios in the form 1:n1:n1:n or n:1n:1n:1.
- Relate ratios to fractions and linear functions.
- Solve problems involving direct proportion.
- Solve problems involving inverse proportion.
- Use compound units such as speed, density and pressure.
- Convert between related standard and compound units.
- Compare lengths, areas and volumes using ratio notation.
- Understand that area scale factors are the square of the length scale factor.
- Understand that volume scale factors are the cube of the length scale factor.
- Set up and interpret equations describing direct proportion. Higher only
- Set up and interpret equations describing inverse proportion. Higher only
- Recognise direct and inverse proportion from graphs. Higher only
Rates of change and growth
- Use percentages to compare quantities and describe change.
- Solve repeated percentage change problems.
- Interpret rates of change from graphs and tables.
- Use distance-time and velocity-time graphs.
- Find speed from the gradient of a distance-time graph.
- Find acceleration from the gradient of a velocity-time graph.
- Find distance from the area under a velocity-time graph.
- Solve growth and decay problems.
- Understand exponential growth and decay. Higher only
Practise Ratio and Proportion: Find ratio, proportion, percentages, compound measures and growth topics on the Edexcel Higher revision page.
Geometry and measures topics
Geometry requires accurate use of definitions, properties and theorems. Diagrams are not necessarily drawn to scale, so conclusions must be justified mathematically rather than estimated from appearance.
Angles, shapes and constructions
- Use conventional terms and notation for points, lines, angles and shapes.
- Apply angle facts involving points, straight lines and vertically opposite angles.
- Use properties of parallel lines, including alternate and corresponding angles.
- Use angle properties of triangles and quadrilaterals.
- Find and use interior and exterior angles of polygons.
- Use properties of special quadrilaterals.
- Identify congruent and similar shapes.
- Apply the standard triangle congruence conditions.
- Construct perpendicular bisectors and angle bisectors.
- Construct perpendiculars from and to a point.
- Construct triangles from given measurements.
- Use constructions to solve loci problems.
- Understand plans and elevations.
- Use bearings accurately.
Measurement, perimeter, area and volume
- Use standard units of length, area, volume, mass, time and money.
- Convert between standard units and compound units.
- Measure and calculate perimeter and area.
- Find areas of triangles, parallelograms and trapezia.
- Find the circumference and area of a circle.
- Find arc lengths and areas of sectors.
- Calculate surface areas and volumes of prisms and cylinders.
- Calculate surface areas and volumes of pyramids, cones and spheres. Higher only
- Solve problems involving composite two-dimensional and three-dimensional shapes.
Transformations, similarity and vectors
- Describe and perform reflections, rotations and translations.
- Describe and perform enlargements with positive scale factors.
- Enlarge shapes using fractional scale factors.
- Use negative scale factors for enlargements. Higher only
- Identify invariant points and lines.
- Describe combined transformations.
- Use similarity to find missing lengths.
- Use area and volume scale factors for similar shapes.
- Use column vectors and vector notation.
- Add and subtract vectors and multiply a vector by a scalar.
- Use vectors to describe geometric arguments and proofs. Higher only
Pythagoras and trigonometry
- Apply Pythagoras’ theorem in two dimensions.
- Use sine, cosine and tangent in right-angled triangles.
- Find missing sides and angles in right-angled triangles.
- Apply Pythagoras and trigonometry in three dimensions. Higher only
- Know and use exact values for common trigonometric angles.
- Use the sine rule. Higher only
- Use the cosine rule. Higher only
- Find the area of a triangle using 12absinC\frac12 ab\sin C21absinC. Higher only
Circle theorems
- Use the fact that the angle at the centre is twice the angle at the circumference. Higher only
- Use angles in the same segment. Higher only
- Use the angle in a semicircle. Higher only
- Use opposite angles in a cyclic quadrilateral. Higher only
- Use radius and tangent properties. Higher only
- Use the alternate segment theorem. Higher only
- Prove and apply standard circle theorems. Higher only
Practise Geometry and Measures: Select Geometry topics such as transformations, vectors, trigonometry and circle theorems from Edexcel GCSE Maths revision.
Probability topics
Probability questions require more than finding a single probability. Higher students must model combined events, interpret conditional information and recognise when assumptions such as independence are justified.
- Record, describe and analyse the frequency of outcomes.
- Use the probability scale from 000 to 111.
- Understand that probabilities of mutually exclusive exhaustive outcomes sum to 111.
- Use theoretical probability to calculate expected frequencies.
- Compare theoretical and experimental probability.
- Understand that larger samples generally produce more reliable estimates.
- List outcomes systematically using tables, grids and diagrams.
- Use sample spaces for single and combined events.
- Use the addition rule for mutually exclusive events.
- Use two-way tables and frequency trees.
- Use tree diagrams for successive events.
- Multiply probabilities along branches of a tree diagram.
- Distinguish between independent and dependent events.
- Calculate conditional probabilities. Higher only
- Use set notation and Venn diagrams in probability problems. Higher only
- Apply the product rule for counting. Higher only
Practise Probability: Use the Probability lessons and exam questions on the Edexcel GCSE Maths topic practice page.
Statistics topics
Statistics covers the full process of collecting, representing and interpreting data. Questions may test whether a conclusion is justified, not merely whether a calculation is correct.
Sampling and data
- Identify populations and samples.
- Understand the limitations of sampling.
- Describe simple random sampling.
- Understand how sample size and sampling method affect reliability.
- Identify sources of bias.
- Design and criticise questionnaires and data-collection methods.
- Distinguish between discrete and continuous data.
- Distinguish between primary and secondary data.
Representing data
- Construct and interpret frequency tables.
- Construct and interpret bar charts, pie charts and pictograms.
- Construct and interpret time-series graphs.
- Construct and interpret stem-and-leaf diagrams.
- Construct and interpret grouped frequency tables.
- Construct and interpret cumulative frequency graphs.
- Construct and interpret box plots.
- Construct and interpret histograms with unequal class intervals. Higher only
- Calculate and use frequency density. Higher only
- Construct and interpret scatter graphs.
- Draw and use lines of best fit.
- Recognise that correlation does not establish causation.
Averages and spread
- Calculate and interpret the mean, median, mode and range.
- Find averages from frequency tables.
- Estimate the mean from grouped data.
- Identify the modal class and the class containing the median.
- Estimate medians, quartiles and interquartile ranges from cumulative frequency graphs.
- Compare distributions using averages and measures of spread.
- Interpret outliers and their effects.
- Use data to make inferences while recognising limitations.
Practise Statistics: Select averages, cumulative frequency, box plots, histograms and other Statistics topics from Edexcel GCSE Maths revision.
How to use this Edexcel GCSE Maths Higher topics checklist
Start by rating each topic as secure, developing or weak. Test your judgement with questions rather than relying on whether the notes look familiar.
A practical revision cycle is:
- Review the method in a revision lesson.
- Answer topic-specific questions without looking at the solution.
- Mark every answer and identify the precise reason for each error.
- Repeat the topic after a delay.
- Combine topics by completing full papers under timed conditions.
Do not revise only the items marked Higher only. Foundation content remains examinable on Higher papers and often forms the first stage of a more demanding problem.
MathsGenie also provides Edexcel exam booklets for focused question practice. Once individual topics are secure, use the GCSE Maths revision area for past papers, predicted papers and mark schemes.
Conclusion
The Edexcel GCSE Maths Higher specification includes all six mathematical strands, with particularly substantial coverage of algebra, ratio and geometry. Higher-only topics are important, but secure knowledge of the shared Foundation content is equally necessary because questions regularly combine both levels of material.
Use this checklist to locate gaps, practise one skill at a time and then check that you can apply those skills in full papers. The most useful next step is to open the MathsGenie Edexcel GCSE Maths revision page, work through your weakest topics and use the available questions and mark schemes to measure progress.

