Coordinate Geometry of Circles A-level Maths Guide
Revise coordinate geometry of circles for A-level Maths, including circle equations, tangents, intersections, clear worked examples and exam-style practice.

Coordinate geometry of circles at A-level Maths combines circle equations with straight-line geometry, algebra and familiar circle properties. You need to recognise a circle's centre and radius, complete the square, find tangents, solve intersections and use perpendicular bisectors accurately.
This guide explains each method step by step, with worked examples, common mistakes and exam-style practice. You can also use the MathsGenie A-level Circles revision lesson for further teaching, questions and worked solutions.
The equation of a circle
A circle with centre (a,b)(a,b)(a,b) and radius rrr has equation
(x−a)2+(y−b)2=r2.(x-a)^2+(y-b)^2=r^2.(x−a)2+(y−b)2=r2.This follows from Pythagoras' theorem. If (x,y)(x,y)(x,y) is any point on the circumference, its horizontal and vertical displacements from the centre are x−ax-ax−a and y−by-by−b. Its distance from the centre is therefore rrr, giving the equation above.
You must read the signs carefully. For example, the circle
(x−5)2+(y+2)2=49(x-5)^2+(y+2)^2=49(x−5)2+(y+2)2=49has centre (5,−2)(5,-2)(5,−2) and radius 777. The sign of each centre coordinate is the opposite of the sign appearing inside its bracket.
A circle centred at the origin has a=0a=0a=0 and b=0b=0b=0, so its equation simplifies to
x2+y2=r2.x^2+y^2=r^2.x2+y2=r2.Completing the square to find the centre and radius
Circle equations are not always presented in centre-radius form. A common alternative is
x2+y2+Dx+Ey+F=0.x^2+y^2+Dx+Ey+F=0.x2+y2+Dx+Ey+F=0.Complete the square separately for the xxx terms and the yyy terms. The identities
x2+px=(x+p2)2−(p2)2x^2+px=\left(x+\frac{p}{2}\right)^2-\left(\frac{p}{2}\right)^2x2+px=(x+2p)2−(2p)2and the equivalent result for yyy are central to the method.
Worked example 1: finding the centre and radius
Find the centre and radius of
x2+y2−8x+6y−11=0.x^2+y^2-8x+6y-11=0.x2+y2−8x+6y−11=0.Group the xxx terms and yyy terms:
(x2−8x)+(y2+6y)=11.(x^2-8x)+(y^2+6y)=11.(x2−8x)+(y2+6y)=11.Complete both squares:
(x−4)2−16+(y+3)2−9=11.(x-4)^2-16+(y+3)^2-9=11.(x−4)2−16+(y+3)2−9=11.Move the constants to the right:
(x−4)2+(y+3)2=36.(x-4)^2+(y+3)^2=36.(x−4)2+(y+3)2=36.The centre is therefore (4,−3)(4,-3)(4,−3) and the radius is 666.
A useful check is that the right-hand side must be r2r^2r2, not rrr. Here, r2=36r^2=36r2=36, so r=6r=6r=6.
For the general equation x2+y2+Dx+Ey+F=0x^2+y^2+Dx+Ey+F=0x2+y2+Dx+Ey+F=0, the centre is
(−D2,−E2).\left(-\frac{D}{2},-\frac{E}{2}\right).(−2D,−2E).Completing the square is still the safest method because it also finds the radius and reduces sign errors.
The value obtained for r2r^2r2 must be positive for a circle with positive radius. If it is zero, the equation describes a single point; if it is negative, there are no real points satisfying the equation. Also check that the squared terms have equal coefficients, dividing through first if they share a common coefficient.
Forming the equation of a circle
If the centre and radius are given, substitute them directly into
(x−a)2+(y−b)2=r2.(x-a)^2+(y-b)^2=r^2.(x−a)2+(y−b)2=r2.If a point on the circumference is given instead of the radius, calculate its distance from the centre. It is often more efficient to calculate r2r^2r2 directly:
r2=(x2−x1)2+(y2−y1)2.r^2=(x_2-x_1)^2+(y_2-y_1)^2.r2=(x2−x1)2+(y2−y1)2.Worked example 2: using the endpoints of a diameter
The endpoints of a diameter are A(−2,1)A(-2,1)A(−2,1) and B(6,5)B(6,5)B(6,5). Find the equation of the circle.
The centre is the midpoint of the diameter:
(−2+62,1+52)=(2,3).\left(\frac{-2+6}{2},\frac{1+5}{2}\right)=(2,3).(2−2+6,21+5)=(2,3).The square of the diameter is
AB2=(6−(−2))2+(5−1)2=82+42=80.AB^2=(6-(-2))^2+(5-1)^2=8^2+4^2=80.AB2=(6−(−2))2+(5−1)2=82+42=80.The radius is half the diameter, so
r2=804=20.r^2=\frac{80}{4}=20.r2=480=20.The equation is
(x−2)2+(y−3)2=20.(x-2)^2+(y-3)^2=20.(x−2)2+(y−3)2=20.Working with squared distances avoids introducing unnecessary surds.
Tangents to circles
The key tangent property is that the tangent is perpendicular to the radius at the point of contact.
If the radius has a finite, non-zero gradient mmm, the tangent has gradient
−1m.-\frac{1}{m}.−m1.Equivalently, the product of the two gradients is −1-1−1. You can then use the point-gradient equation
y−y1=m(x−x1)y-y_1=m(x-x_1)y−y1=m(x−x1)to form the tangent.
Worked example 3: equation of a tangent
The circle has centre (2,−1)(2,-1)(2,−1). The point P(5,3)P(5,3)P(5,3) lies on the circle. Find the tangent at PPP.
The gradient of the radius from (2,−1)(2,-1)(2,−1) to (5,3)(5,3)(5,3) is
3−(−1)5−2=43.\frac{3-(-1)}{5-2}=\frac{4}{3}.5−23−(−1)=34.The tangent gradient is the negative reciprocal:
m=−34.m=-\frac{3}{4}.m=−43.Using P(5,3)P(5,3)P(5,3), the tangent is
y−3=−34(x−5).y-3=-\frac{3}{4}(x-5).y−3=−43(x−5).This is a complete equation, although an exam may ask you to rearrange it. In integer form it becomes
3x+4y−27=0.3x+4y-27=0.3x+4y−27=0.A horizontal radius produces a vertical tangent, whose equation is x=kx=kx=k. A vertical radius produces a horizontal tangent, whose equation is y=ky=ky=k. These cases should not be forced into a gradient calculation involving division by zero.
When a question asks you to establish that a given point is on the circle, substitute its coordinates into the circle equation first. Perpendicularity alone is insufficient to identify a tangent at a named point unless that point is on the circumference. Finally, check that your tangent equation contains the point of contact.
Intersections of lines and circles
To find where a straight line intersects a circle, substitute the line equation into the circle equation. The result is usually a quadratic.
The number of real solutions has a geometric meaning:
- Two distinct solutions: the line crosses the circle twice.
- One repeated solution: the line is tangent to the circle.
- No real solutions: the line does not meet the circle.
For a quadratic Ax2+Bx+C=0Ax^2+Bx+C=0Ax2+Bx+C=0, the discriminant is
Δ=B2−4AC.\Delta=B^2-4AC.Δ=B2−4AC.A tangent has exactly one point of contact, so its quadratic has discriminant 000. This provides an important alternative method when a tangent contains an unknown constant, such as y=mx+cy=mx+cy=mx+c.
Always substitute back into the line equation after solving for xxx. A pair of xxx coordinates alone is not a pair of intersection points.
For a vertical line, substitute its fixed xxx coordinate directly and solve for yyy instead. When a parameter appears in the line equation, first collect the substituted equation carefully into quadratic form. The discriminant condition then gives an equation or inequality describing the required number of intersections.
Chords, perpendicular bisectors and circumcircles
A second important circle property is that the perpendicular from the centre to a chord bisects the chord.
Consequently, the centre lies on the perpendicular bisector of every chord. This makes it possible to find an unknown centre by constructing perpendicular bisectors of two different chords and solving their equations simultaneously.
For each chord, calculate its midpoint and gradient, then write the line through that midpoint perpendicular to the chord. Choose two chords with different directions so their perpendicular bisectors determine a unique centre. Horizontal and vertical chords are particularly convenient because their perpendicular bisectors have simple equations.
A circumcircle passes through all three vertices of a triangle. Its centre, called the circumcentre, is the intersection of the perpendicular bisectors of the triangle's sides. Once the centre has been found, use the distance to any vertex to calculate r2r^2r2.
You may also use the fact that the angle in a semicircle is a right angle. Questions combining circles and triangle geometry are covered in the MathsGenie Circles and Triangles lesson.
Coordinate geometry of circles exam question
The circle CCC has equation
x2+y2−6x+4y−12=0.x^2+y^2-6x+4y-12=0.x2+y2−6x+4y−12=0.The point P(7,1)P(7,1)P(7,1) lies on CCC.
- Find the centre and radius of CCC.
- Find the equation of the tangent to CCC at PPP, giving your answer in the form ax+by+c=0ax+by+c=0ax+by+c=0.
- The line y=xy=xy=x intersects CCC at two points. Find their coordinates.
Answer
Complete the square:
x2−6x+y2+4y=12,x^2-6x+y^2+4y=12,x2−6x+y2+4y=12, (x−3)2−9+(y+2)2−4=12,(x-3)^2-9+(y+2)^2-4=12,(x−3)2−9+(y+2)2−4=12, (x−3)2+(y+2)2=25.(x-3)^2+(y+2)^2=25.(x−3)2+(y+2)2=25.The centre is (3,−2)(3,-2)(3,−2) and the radius is 555.
The gradient of the radius from (3,−2)(3,-2)(3,−2) to P(7,1)P(7,1)P(7,1) is
1−(−2)7−3=34.\frac{1-(-2)}{7-3}=\frac{3}{4}.7−31−(−2)=43.The tangent gradient is −43-\frac{4}{3}−34, so
y−1=−43(x−7).y-1=-\frac{4}{3}(x-7).y−1=−34(x−7).Multiplying by 333 and rearranging gives
4x+3y−31=0.4x+3y-31=0.4x+3y−31=0.For the intersections with y=xy=xy=x, substitute y=xy=xy=x into the original circle equation:
x2+x2−6x+4x−12=0,x^2+x^2-6x+4x-12=0,x2+x2−6x+4x−12=0, 2x2−2x−12=0.2x^2-2x-12=0.2x2−2x−12=0.Dividing by 222 and factorising:
x2−x−6=0,x^2-x-6=0,x2−x−6=0, (x−3)(x+2)=0.(x-3)(x+2)=0.(x−3)(x+2)=0.Therefore x=3x=3x=3 or x=−2x=-2x=−2. Since y=xy=xy=x, the intersection points are (3,3)(3,3)(3,3) and (−2,−2)(-2,-2)(−2,−2).
Try further coordinate geometry of circles practice. You can then attempt a further mixed circle question or a tangent-focused question.
Common mistakes in circle questions
- Reading the centre signs incorrectly: (x+4)2(x+4)^2(x+4)2 gives an xxx coordinate of −4-4−4, not 444.
- Confusing rrr with r2r^2r2: if the equation ends in =81=81=81, the radius is 999.
- Completing the square inaccurately: after adding a number inside a completed square, account for the same number elsewhere in the equation.
- Using the radius gradient for the tangent: the tangent requires the negative reciprocal gradient.
- Assuming perpendicular means changing only the sign: the negative reciprocal of 23\frac{2}{3}32 is −32-\frac{3}{2}−23, not −23-\frac{2}{3}−32.
- Giving incomplete intersection coordinates: substitute each solved value back into the line to find the corresponding second coordinate.
- Rounding too early: retain exact fractions and surds unless the question requests a decimal approximation.
- Expanding unnecessarily: centre-radius form is often clearer and less prone to errors than a fully expanded equation.
How to revise coordinate geometry of circles
Learn the centre-radius form first, then practise moving fluently between equations, coordinates and geometric properties. For each question, identify what information is given and which property connects it to the unknown quantity.
A reliable revision order is:
- Read centres and radii from standard equations.
- Complete the square for expanded equations.
- Form equations from centres, points and diameters.
- Find tangent equations using perpendicular gradients.
- Solve line-circle intersections.
- Use perpendicular bisectors to find circumcentres.
- Attempt mixed exam questions without prompts.
Show substitutions and intermediate algebra clearly. Marks are often available for a correct method even if a later arithmetic error affects the final answer.
After marking your work, identify whether each error came from choosing a property, setting up an equation or manipulating the algebra. Repeat the affected method before attempting another mixed question. Check proposed intersection points in both original equations, and check a calculated centre by comparing its squared distances to the given circumference points.
Students reviewing earlier coordinate geometry can consult the GCSE Maths topics by exam board and tier before returning to A-level circle questions.
Conclusion
For coordinate geometry of circles at A-level Maths, the central equation is (x−a)2+(y−b)2=r2(x-a)^2+(y-b)^2=r^2(x−a)2+(y−b)2=r2. Completing the square reveals the centre and radius, while perpendicular gradients connect radii to tangents. Substitution produces line-circle intersections, and perpendicular bisectors locate centres and circumcircles.
Accurate algebra matters as much as the geometry. Use the MathsGenie Circles lesson to review each method, then complete the linked practice questions and check the worked solutions before progressing to mixed papers.
Sources and referenced URLs
- https://mathsgenie.co.uk/a-level/maths/edexcel/as-pure-mathematics-6-circles
- https://mathsgenie.co.uk/a-level/maths/edexcel/as-pure-mathematics-6-circles/questions/q1
- https://mathsgenie.co.uk/a-level/maths/edexcel/as-pure-mathematics-6-circles/questions/q7
- https://mathsgenie.co.uk/a-level/maths/edexcel/as-pure-mathematics-6-circles/questions/q275
- https://mathsgenie.co.uk/as-level/maths/edexcel/as-pure-mathematics-6-5-circles-and-triangles
- https://mathsgenie.co.uk/blog/gcse-maths-topics-by-exam-board-and-tier



