Cones and Spheres GCSE Maths: Mock Revision
Cones and spheres GCSE maths revision for December mocks: learn the formulas, tackle two exam-style questions and avoid common mistakes with MathsGenie.

December mocks can make familiar topics feel unexpectedly uncertain. Imagine a Year 11 student opening a cones and spheres GCSE maths question: the formula looks familiar, but the diagram has two heights, and suddenly nothing feels obvious. The way forward is to identify the measurement required, label the correct dimensions, then substitute carefully. Most of the difficulty comes before the calculator is touched.
This revision guide follows that student from recognising the shapes to completing two exam-style questions. You can practise alongside it using MathsGenie’s spheres and cones revision resources.
Your cones and spheres mock revision checklist
Before attempting a question, check that you can:
- Distinguish volume from surface area.
- Find the radius when given the diameter.
- Identify a cone’s perpendicular height and slant height.
- Recognise a hemisphere as half a sphere.
- Decide which surfaces are exposed on a compound solid.
- Keep full calculator accuracy until the final answer.
Start with the first point you cannot explain confidently. Watching an entire lesson again is less useful than finding the precise decision that keeps going wrong.
Match the formula to the measurement
Volume measures the space inside a solid. Surface area measures the area covering its outside. Write that distinction beside your revision notes before learning the formulas.
For a cone with radius rrr, perpendicular height hhh and slant height lll:
V=13πr2hV=\frac{1}{3}\pi r^2hV=31πr2h Acurved=πrlA_{\text{curved}}=\pi rlAcurved=πrlFor the total surface area of a closed cone, include its circular base:
Atotal=πrl+πr2A_{\text{total}}=\pi rl+\pi r^2Atotal=πrl+πr2The perpendicular height runs straight from the vertex to the centre of the base. The slant height follows the sloping surface. Volume uses the perpendicular height; curved surface area uses the slant height.
For a sphere:
V=43πr3V=\frac{4}{3}\pi r^3V=34πr3 A=4πr2A=4\pi r^2A=4πr2A hemisphere has half a sphere’s volume and half its curved surface area. Its total surface area also includes the flat circular face:
Vhemisphere=23πr3V_{\text{hemisphere}}=\frac{2}{3}\pi r^3Vhemisphere=32πr3 Ahemisphere, total=3πr2A_{\text{hemisphere, total}}=3\pi r^2Ahemisphere, total=3πr2MathsGenie’s spheres and cones revision guide provides a useful place to revisit these distinctions before practising independently.
A method you can repeat under pressure
Our hypothetical student’s first improvement is simple: stop substituting immediately.
First, underline what the question asks for. Next, label the radius and any relevant height on the diagram. Write the formula, substitute the values, then calculate. Finish by checking units and the requested accuracy.
If a right circular cone’s slant height is missing, a cross-section through its centre gives a right-angled triangle:
l2=r2+h2l^2=r^2+h^2l2=r2+h2Use Pythagoras only when a missing length is needed. A question asking for volume may already give everything required, even if the diagram also contains a slant height.
Stick-figure pupil holding a paper cone and asking a ball about the December mock
Two cones and spheres exam questions
These original exam-style questions practise two different decisions: choosing the correct height and identifying exposed surfaces.
Cone: find the total surface area
Question: A solid right circular cone has radius 5 cm5\text{ cm}5 cm and perpendicular height 12 cm12\text{ cm}12 cm. Calculate its total surface area. Give your answer to three significant figures.
The surface area formula requires the slant height, so find it first:
l=52+122=169=13 cml=\sqrt{5^2+12^2}=\sqrt{169}=13\text{ cm}l=52+122=169=13 cmTotal surface area includes the curved surface and the circular base:
A=πrl+πr2A=\pi rl+\pi r^2A=πrl+πr2 A=π×5×13+π×52A=\pi\times5\times13+\pi\times5^2A=π×5×13+π×52 A=65π+25π=90π cm2A=65\pi+25\pi=90\pi\text{ cm}^2A=65π+25π=90π cm2Therefore, to three significant figures:
A=283 cm2\boxed{A=283\text{ cm}^2}A=283 cm2The key decision happened before the arithmetic: 12 cm12\text{ cm}12 cm was the perpendicular height, so it could not go directly into the curved surface area formula.
Hemisphere and cone: find the outside area
Question: A hemisphere is joined to a cone along their matching circular faces. Both have radius 3 cm3\text{ cm}3 cm. The cone has slant height 8 cm8\text{ cm}8 cm. Find the total external surface area in terms of π\piπ.
The circular faces touch inside the solid. Neither is exposed, so include only the curved hemisphere and curved cone.
For the hemisphere:
Ahemisphere, curved=12×4πr2A_{\text{hemisphere, curved}}=\frac{1}{2}\times4\pi r^2Ahemisphere, curved=21×4πr2 Ahemisphere, curved=2π×32=18π cm2A_{\text{hemisphere, curved}}=2\pi\times3^2=18\pi\text{ cm}^2Ahemisphere, curved=2π×32=18π cm2For the cone:
Acone, curved=πrl=π×3×8=24π cm2A_{\text{cone, curved}}=\pi rl=\pi\times3\times8=24\pi\text{ cm}^2Acone, curved=πrl=π×3×8=24π cm2Add the exposed areas:
A=18π+24π=42π cm2\boxed{A=18\pi+24\pi=42\pi\text{ cm}^2}A=18π+24π=42π cm2Because the answer is requested in terms of π\piπ, leave it exact. You do not need a decimal approximation.
For further independent practice, try the spheres and cones exam booklet. Complete a question before checking its solution.
Common mistakes to catch before your mock
Pearson’s June 2019 GCSE Mathematics chief examiner report highlighted students calculating the volume of a whole sphere when a question required a hemisphere. That is a useful reminder to read the solid’s description as carefully as its dimensions.
Other slips worth checking in your own work include:
- Using the diameter as the radius. Halve the diameter before substituting.
- Swapping the heights. Use perpendicular height for cone volume and slant height for curved surface area.
- Forgetting the base. A closed cone’s total surface area includes its circular base.
- Counting hidden faces. Joined circular faces are internal when calculating external surface area.
- Rounding too early. Retain exact values or full calculator precision until the final line.
- Using incorrect units. Area uses squared units such as cm2\text{cm}^2cm2; volume uses cubed units such as cm3\text{cm}^3cm3.
Write the reason for each mistake beside your correction. “Used diameter” gives your next revision session a clearer purpose than “wrong answer”.
Turn your December revision into targeted practice
The next evening, our hypothetical student returns to the question that caused trouble and attempts it without notes. That small test reveals whether the method is now understood or merely familiar.
Use MathsGenie’s GCSE question bank to mix surface area, volume and missing-length questions. Check working against the available mark schemes and worked solutions, then repeat any question where the diagram caused hesitation. Choose resources for your board, including the AQA spheres and cones topic page if appropriate.
When you are ready, open the Exam builder tool from MathsGenie’s topic pages and build a targeted practice paper in Mock Exam Builder. Select cones and spheres alongside the prerequisite topics you need. Attempt it without notes, mark it carefully, and let the errors decide what you revise next.


