Compound Measures GCSE Maths: Examples and Practice
Compound measures GCSE maths explained with clear speed, density and pressure examples, unit conversions, common mistakes and exam-style practice questions.

Imagine a student who remembers the speed formula but still gets the answer wrong. On the next question, they multiply when they should divide. Then minutes appear, and everything becomes uncertain again. If this sounds familiar, compound measures GCSE maths becomes clearer when you read the units first: a compound measure combines quantities, and “per” tells you which quantity to divide by.
We will follow this hypothetical student through the point where the method clicks: identify the rate, match the units, then calculate. You will see worked examples for speed, density and pressure, followed by questions to try yourself.
Compound measures GCSE maths: the essentials
A compound measure combines quantities to describe a rate or relationship. Speed describes distance travelled per unit of time. Density describes mass per unit of volume. Pressure describes force per unit of area.
Before calculating, check:
- Which quantity are you finding?
- What units must your answer use?
- Do any measurements need converting?
- Should you multiply or divide?
These topics are relevant to both foundation and higher tier. AQA’s GCSE specification, for example, includes speed, rates of pay and unit pricing, alongside density and pressure within its foundation content.
For board-matched resources, MathsGenie has Edexcel Speed and Density lessons and AQA Speed and Density lessons.
Read the units before choosing the calculation
Our imagined student’s first useful change is small: they stop reaching straight for the calculator.
A speed measured in km/h\mathrm{km/h}km/h means kilometres per hour. A density measured in g/cm3\mathrm{g/cm^3}g/cm3 means grams per cubic centimetre. Each unit describes a division:
speed=distancetime\text{speed}=\frac{\text{distance}}{\text{time}}speed=timedistance density=massvolume\text{density}=\frac{\text{mass}}{\text{volume}}density=volumemass pressure=forcearea\text{pressure}=\frac{\text{force}}{\text{area}}pressure=areaforceIf you need the quantity on top of a fraction, multiply the rate by the denominator. If you need the denominator, divide the numerator by the rate.
For example, distance is speed multiplied by time; volume is mass divided by density. Writing the relationship before substituting numbers makes these choices easier to check.
Turn this units-first method into practice with the Lessons and Question Bank on MathsGenie’s Speed and Density topic page.
Compound measures worked examples
Speed: convert time before dividing
A cyclist travels 18 km18\,\mathrm{km}18km in 454545 minutes. Calculate their average speed in km/h\mathrm{km/h}km/h.
First, match the time unit to the answer. We need hours:
45÷60=0.75 hours45\div60=0.75\,\mathrm{hours}45÷60=0.75hoursNext, substitute into the formula:
average speed=180.75=24 km/h\text{average speed}=\frac{18}{0.75}=24\,\mathrm{km/h}average speed=0.7518=24km/hFinally, check the size. The cyclist travels 18 km18\,\mathrm{km}18km in less than an hour, so their hourly speed should be greater than 18 km/h18\,\mathrm{km/h}18km/h.
This is where our student notices the earlier mistake: dividing by 454545 would give kilometres per minute, not kilometres per hour. The arithmetic could be correct while the answer uses the wrong unit.
Density: finding mass
A metal block has volume 150 cm3150\,\mathrm{cm^3}150cm3 and density 2.7 g/cm32.7\,\mathrm{g/cm^3}2.7g/cm3. Find its mass.
Start with the relationship:
density=massvolume\text{density}=\frac{\text{mass}}{\text{volume}}density=volumemassRearrange to find mass:
mass=density×volume\text{mass}=\text{density}\times\text{volume}mass=density×volumeSubstitute and calculate:
mass=2.7×150=405 g\text{mass}=2.7\times150=405\,\mathrm{g}mass=2.7×150=405gEach cubic centimetre has a mass of 2.7 g2.7\,\mathrm{g}2.7g. There are 150150150 cubic centimetres, so multiplication fits the meaning of the question.
For another explanation of this relationship, MathsGenie’s AQA Speed and Density revision guide provides a topic recap.
Pressure: finding contact area
A force of 360 N360\,\mathrm{N}360N produces a pressure of 120 N/cm2120\,\mathrm{N/cm^2}120N/cm2. Calculate the contact area.
Write the formula:
pressure=forcearea\text{pressure}=\frac{\text{force}}{\text{area}}pressure=areaforceRearrange before substituting:
area=forcepressure\text{area}=\frac{\text{force}}{\text{pressure}}area=pressureforceCalculate:
area=360120=3 cm2\text{area}=\frac{360}{120}=3\,\mathrm{cm^2}area=120360=3cm2The pressure unit tells us the area must be in square centimetres. With the same force, spreading the contact over a larger area would reduce the pressure.
Unit conversions that deserve a separate line
Our student now understands the formulas, but conversions still need attention. Writing them separately prevents a correct method from being undermined by mismatched measurements.
For speed, both distance and time may change. To convert from m/s\mathrm{m/s}m/s to km/h\mathrm{km/h}km/h, multiply by 3.63.63.6:
1 m/s=36001000 km/h=3.6 km/h1\,\mathrm{m/s}=\frac{3600}{1000}\,\mathrm{km/h}=3.6\,\mathrm{km/h}1m/s=10003600km/h=3.6km/hTo convert in the opposite direction, divide by 3.63.63.6.
Area and volume conversions require particular care:
1 m2=10,000 cm21\,\mathrm{m^2}=10{,}000\,\mathrm{cm^2}1m2=10,000cm2 1 m3=1,000,000 cm31\,\mathrm{m^3}=1{,}000{,}000\,\mathrm{cm^3}1m3=1,000,000cm3The length conversion factor is squared for area and cubed for volume. Also remember that 1 Pa=1 N/m21\,\mathrm{Pa}=1\,\mathrm{N/m^2}1Pa=1N/m2. If pressure is required in pascals, the area must be in square metres when force is in newtons.
Common mistakes and how to catch them
Treating minutes as decimal hours. A journey lasting 111 hour 303030 minutes takes 1.51.51.5 hours, not 1.301.301.30 hours. Divide the minutes by 606060.
Averaging speeds without checking journey times. For a whole journey, calculate total distance divided by total time. The arithmetic mean of two speeds only gives the overall average when the time spent at each speed is equal.
Using the original formula without rearranging. If the question asks for volume, write volume=mass÷density\text{volume}=\text{mass}\div\text{density}volume=mass÷density before entering numbers.
Dropping units or rounding too early. Carry units through your working and retain calculator precision until the final answer. Then follow any rounding instruction in the question.
The student's progress becomes believable here: they still make occasional slips, but can now identify whether the problem was the formula, conversion or calculation.
Compound measures questions to try
Attempt these exam-style questions before checking the answers. Show the formula, any conversion and your final unit.
- A car travels 156 km156\,\mathrm{km}156km in 222 hours 242424 minutes. Calculate its average speed in km/h\mathrm{km/h}km/h.
- A material has mass 540 g540\,\mathrm{g}540g and volume 200 cm3200\,\mathrm{cm^3}200cm3. Calculate its density.
- A force of 750 N750\,\mathrm{N}750N acts over 0.025 m20.025\,\mathrm{m^2}0.025m2. Calculate the pressure in pascals.
Answers:
speed=1562+2460=65 km/h\text{speed}=\frac{156}{2+\frac{24}{60}}=65\,\mathrm{km/h}speed=2+6024156=65km/h density=540200=2.7 g/cm3\text{density}=\frac{540}{200}=2.7\,\mathrm{g/cm^3}density=200540=2.7g/cm3 pressure=7500.025=30,000 Pa\text{pressure}=\frac{750}{0.025}=30{,}000\,\mathrm{Pa}pressure=0.025750=30,000PaWhen reviewing, compare your setup as well as your answer. MathsGenie’s Speed and Density Question Bank includes worked solutions and mark schemes to help you locate mistakes.
Make the method stick
Our hypothetical student’s turning point was learning to read the units and write the relationship before calculating. You now have that method; applying it independently across mixed questions is the next step. Your turn: start the Speed and Density Lessons and Question Bank and use the units-first method on each question.



