Zero Index Exam Questions: GCSE Worked Answers
Zero index exam questions explained through three GCSE examples, method-mark guidance, common mistakes and targeted practice for confident answers.

A zero index can look almost too simple. A student remembers that anything to the power of zero is 111, writes the answer, and moves on. Then a later question hides the same rule inside brackets, division or algebra, and the certainty disappears.
The essential rule for zero index exam questions is:
a0=1for a≠0 a^0=1 \quad \text{for } a\neq 0 a0=1for a=0That condition matters. Provided the base is non-zero, the answer is always 111. The base might be a number, a variable or an entire expression. The skill in a GCSE exam is often recognising when an index has become zero, rather than merely recalling the rule.
Your zero index checklist
Before working through a question, use this short routine:
- Identify the complete base attached to the index.
- Check whether the base is non-zero.
- Look for index laws that create a zero power.
- Show the step where indices are subtracted or simplified.
- Replace the resulting non-zero base raised to zero with 111.
- Check whether the question asks you to evaluate, simplify or explain.
The wording and mark allocation can vary between exam boards and papers, but this reasoning remains the same. You can review it in the matching GCSE Indices lesson and question bank. OCR students can use the corresponding OCR GCSE Indices resources.
Why does a zero index equal one?
The rule is not an arbitrary fact added to a long list. It follows from division.
For a non-zero value of aaa:
amam=1 \frac{a^m}{a^m}=1 amam=1Using the division law for indices gives:
amam=am−m=a0 \frac{a^m}{a^m}=a^{m-m}=a^0 amam=am−m=a0Since m−m=0m-m=0m−m=0, the two results must agree:
a0=1 a^0=1 a0=1This explanation also shows why aaa must not be zero. Dividing by ama^mam is only valid when a≠0a\neq 0a=0. At GCSE, do not automatically apply the rule to 000^000.
A tired GCSE student discovers that zero power is surprisingly useful
Three zero index exam questions worked step by step
Imagine a student, Sam, meeting three questions on the same paper. Each question tests the same idea, but each hides it a little more carefully. The mark guidance below is indicative rather than an official mark scheme, because exact allocations depend on the paper.
Question one: evaluating a visible zero index
Evaluate 12012^0120.
Sam can see the zero index immediately. The base is 121212, which is non-zero, so the rule applies:
120=1 12^0=1 120=1Answer: 111
This is commonly an answer mark. There may be no separate method mark because no intermediate calculation is needed. Writing 000 would lose the mark, while a long explanation would not normally gain anything beyond the correct answer.
The lesson is simple: when the index is already zero, answer directly and move on.
Question two: creating a zero index by division
Simplify 5757\frac{5^7}{5^7}5757.
Sam first notices that the bases are the same. For division with the same base, subtract the indices:
5757=57−7 \frac{5^7}{5^7}=5^{7-7} 5757=57−7Then simplify the index:
57−7=50 5^{7-7}=5^0 57−7=50Finally, use the zero index rule:
50=1 5^0=1 50=1Answer: 111
In a multi-mark version, the line 57−75^{7-7}57−7 could provide the method evidence, with the final 111 earning the accuracy mark. Sam could also notice that any non-zero quantity divided by itself equals 111, but showing the index subtraction makes the intended method unmistakable.
This is where zero index past paper questions become more interesting. The question might never mention a zero power; you create one by applying another index law.
Question three: zero index hidden inside algebra
Given that x≠0x\neq 0x=0, simplify:
(2x3)24x6 \frac{(2x^3)^2}{4x^6} 4x6(2x3)2Sam starts with the brackets. Both the coefficient and the power of xxx must be squared:
(2x3)2=22(x3)2 (2x^3)^2=2^2(x^3)^2 (2x3)2=22(x3)2Use the power-of-a-power rule, multiplying the indices:
22(x3)2=4x6 2^2(x^3)^2=4x^6 22(x3)2=4x6The original expression therefore becomes:
4x64x6 \frac{4x^6}{4x^6} 4x64x6The coefficients cancel, while the indices on xxx subtract:
4x64x6=x6−6=x0 \frac{4x^6}{4x^6}=x^{6-6}=x^0 4x64x6=x6−6=x0Because the question states that x≠0x\neq 0x=0:
x0=1 x^0=1 x0=1Answer: 111
An indicative marking route might reward correctly expanding the bracket, applying the division law and reaching the final answer. Even if Sam makes a later arithmetic slip, clear intermediate steps may preserve method marks. A bare answer of 111 gives the examiner much less evidence if anything has gone wrong.
You now have the complete method: simplify the expression, expose the zero index, and finish with 111. To practise the same progression without assembling questions yourself, use the Indices Lessons and Question Bank.
How to recognise the question in disguise
A zero index GCSE exam question does not always display a small zero from the beginning. Watch for these structures:
| What you see | What to do |
|---|---|
| a0a^0a0 | Write 111 if a≠0a\neq 0a=0 |
| amam\frac{a^m}{a^m}amam | Subtract the indices to obtain a0a^0a0 |
| aman\frac{a^m}{a^n}anam where m=nm=nm=n | Recognise that m−n=0m-n=0m−n=0 |
| A bracket raised to zero | Treat the whole bracket as the base |
| Powers inside brackets | Simplify the brackets before dividing |
For instance, in (3y−2)0(3y-2)^0(3y−2)0, the base is the whole expression 3y−23y-23y−2. Its value is 111 provided that 3y−2≠03y-2\neq 03y−2=0.
If a question continues into negative indices, the fractional and negative indices lesson explains the next stage. The guide to fractional and negative indices also helps distinguish a zero index from a negative one.
Common mistakes in zero index questions
Writing zero as the answer
The index tells you how many times the base is involved in repeated multiplication. It is not the value of the expression. For a non-zero base:
a0=1 a^0=1 a0=1not 000.
Multiplying the base by zero
A power is not multiplication by its index. Therefore:
80≠8×0 8^0\neq 8\times 0 80=8×0Instead, 80=18^0=180=1.
Forgetting the complete base
In (x+4)0(x+4)^0(x+4)0, the entire bracket is raised to zero. The result is 111, provided x+4≠0x+4\neq 0x+4=0. Do not apply the zero only to the 444 or remove the brackets prematurely.
Confusing zero and negative indices
A zero index gives 111, while a negative index gives a reciprocal. For example:
a−1=1a a^{-1}=\frac{1}{a} a−1=a1These rules are related, but they are not interchangeable.
Skipping the method in an algebraic question
A one-mark evaluation may need only an answer. A longer simplification should show the relevant index laws. Lines such as x6−6=x0x^{6-6}=x^0x6−6=x0 make your reasoning visible and can be important when method marks are available.
Exam-style practice
Try these without looking back at the examples:
- Evaluate 19019^0190.
- Simplify 3838\frac{3^8}{3^8}3838.
- Evaluate (7−2)0(7-2)^0(7−2)0.
- Simplify y11y11\frac{y^{11}}{y^{11}}y11y11, where y≠0y\neq 0y=0.
- Simplify (5a2)225a4\frac{(5a^2)^2}{25a^4}25a4(5a2)2, where a≠0a\neq 0a=0.
- Explain why k6k6=1\frac{k^6}{k^6}=1k6k6=1 requires k≠0k\neq 0k=0.
The answers are 111, 111, 111, 111 and 111 for the first five questions. For the final question, k=0k=0k=0 would make the denominator zero, so the division would be undefined.
Do not stop after recognising the pattern. Practise writing the intermediate index step as well. That is what turns remembered knowledge into a reliable exam method.
Turn the rule into marks
Sam's progress across the three questions did not depend on learning three separate tricks. The same rule appeared first in plain sight, then through division, and finally inside an algebraic expression. Your remaining gap is repetition: recognising the structure quickly and showing enough working for the available method marks.
Open the GCSE Indices Lessons and Question Bank and practise zero index exam questions now.



