Multiplying Decimals Exam Questions: GCSE Guide
Multiplying decimals exam questions explained with three GCSE worked examples, method-mark guidance and practice to help you avoid decimal-point errors.

Multiplying decimals: make the method visible
You know how to multiply, but a decimal point can make a familiar calculation feel uncertain. Multiplying decimals exam questions become much more manageable when you separate the job into three parts: multiply using whole numbers, restore the correct place value, then check the size of your answer.
That approach helps with both straightforward calculations and questions involving money or measures. It also leaves clear working for an examiner to follow if something goes wrong.
Imagine a student working through three questions without a calculator. These are original GCSE-style examples, not questions taken from a particular past paper. We will follow their decisions, including the working that can provide evidence for method marks.
Your decimal multiplication checklist
Before starting, keep this short routine beside you:
- Estimate: decide roughly how large the answer should be.
- Multiply: temporarily treat the decimal numbers as whole numbers.
- Rescale: count the decimal places across both original numbers and put that many into the product.
- Check: compare your answer with your estimate and include any required units.
Decimal multiplication is part of GCSE number work on both foundation and higher tier. The same arithmetic can appear alone or inside a longer problem.
MathsGenie's Multiplication and Division lesson covers the underlying whole-number and decimal methods.
Why the decimal-place rule works
The rule is not a trick. It reverses the changes you made to the original numbers.
If you multiply each of two numbers by 101010 to make them whole numbers, their product becomes 100100100 times larger. You must therefore divide the whole-number product by 100100100 to recover the original answer.
More generally, if the factors have aaa and bbb decimal places, the whole-number product must be divided by:
10a+b10^{a+b}10a+bThat explains why you add the numbers of decimal places, rather than copying the decimal position from either factor.
Build your confidence with this routine using MathsGenie's Lessons and Question Bank, so you can practise the same decisions across different questions.
Three multiplying decimals exam questions, worked through
First question: a decimal multiplied by a whole number
Work out 2.4×32.4 \times 32.4×3 without a calculator.
Our imagined student begins with a rough check: three lots of a number just above 222 should be a little above 666.
Multiply as whole numbers.
24×3=7224 \times 3 = 7224×3=72Restore the place value.
There is one decimal place in 2.42.42.4 and none in 333, so the product needs one decimal place:
2.4×3=7.22.4 \times 3 = 7.22.4×3=7.2Check the size. The answer is a little above 666, as expected.
Where method marks can come from: writing 24×3=7224 \times 3 = 7224×3=72 shows the multiplication being used. Restoring the decimal point completes the calculation. Whether a separate method mark is available depends on the question's mark scheme; some short questions award only an answer mark.
The useful habit is to show the calculation, rather than leave only an unexplained answer.
Second question: multiplying two decimals
Work out 3.6×1.43.6 \times 1.43.6×1.4 without a calculator.
This time, the student notices that multiplying 3.63.63.6 by a number greater than 111 should increase it. The answer must be greater than 3.63.63.6.
Multiply as whole numbers. Split 141414 into 101010 and 444:
36×4=14436 \times 4 = 14436×4=144 36×10=36036 \times 10 = 36036×10=360Add the partial products:
144+360=504144 + 360 = 504144+360=504Restore the place value. Each original factor has one decimal place, giving two altogether:
3.6×1.4=5.043.6 \times 1.4 = 5.043.6×1.4=5.04Check the size. The result is greater than 3.63.63.6 but less than 7.27.27.2, which would be double 3.63.63.6. That fits multiplication by 1.41.41.4.
Where method marks can come from: the partial products show a valid multiplication method. They also make an arithmetic slip easier to distinguish from a misunderstanding. A correct decimal adjustment then establishes the final value. Exact credit depends on the published mark scheme, so do not assume every written line earns a mark.
Stick-figure student facing a tiny decimal point wearing an oversized crown, a comic break about how demanding decimal points can feel.
Third question: small decimals in an area problem
A rectangular label measures 0.048 m0.048\text{ m}0.048 m by 0.35 m0.35\text{ m}0.35 m. Calculate its area.
Now the student must choose the operation as well as perform it. For a rectangle:
Area=length×width\text{Area} = \text{length} \times \text{width}Area=length×widthSo the required calculation is:
0.048×0.350.048 \times 0.350.048×0.35Estimate first.
0.05×0.4=0.020.05 \times 0.4 = 0.020.05×0.4=0.02Both rounded factors are slightly larger than the originals, so the exact answer should be slightly below 0.02 m20.02\text{ m}^20.02 m2.
Multiply as whole numbers.
48×5=24048 \times 5 = 24048×5=240 48×30=144048 \times 30 = 144048×30=1440 240+1440=1680240 + 1440 = 1680240+1440=1680Restore the place value. There are three decimal places in 0.0480.0480.048 and two in 0.350.350.35, giving five altogether:
0.048×0.35=0.01680=0.01680.048 \times 0.35 = 0.01680 = 0.01680.048×0.35=0.01680=0.0168Therefore:
Area=0.0168 m2\text{Area} = 0.0168\text{ m}^2Area=0.0168 m2The final zero can be removed without changing the value. The answer also agrees with the estimate.
Where method marks can come from: writing the product of the two lengths shows the correct area method. The whole-number multiplication and rescaling make the arithmetic traceable. Include square units because you have calculated area, not length.
Common mistakes that change the answer
Lining up decimal points as though adding
For addition and subtraction, matching place-value columns is essential. For multiplication, use whole-number multiplication and then rescale the product. Aligning decimal points alone does not determine the answer's decimal position.
Counting decimal places in only one factor
Both factors affect the scale. In the third question, counting only the three places in 0.0480.0480.048 would miss the effect of the two places in 0.350.350.35.
Write the total before placing the decimal point if you tend to rush this step.
Assuming multiplication always makes numbers bigger
Multiplying a positive number by a positive number below 111 makes it smaller. This is a powerful check: the label's area calculation must produce a number below 0.0480.0480.048, because the other factor is 0.350.350.35.
Rounding before the calculation is finished
Use rounded values for an estimate, but keep the original values for the exact calculation. Only round your final answer if the question requests it.
Exam-style practice: try the routine independently
Attempt these without a calculator. Show your multiplication and decimal adjustment before checking the answers.
- Quick calculation: work out 1.7×41.7 \times 41.7×4.
- Two decimal factors: work out 2.8×1.62.8 \times 1.62.8×1.6.
- Context question: ribbon costs £2.752.752.75 per metre. Find the cost of 0.8 m0.8\text{ m}0.8 m.
Answers: 6.86.86.8; 4.484.484.48; £2.202.202.20.
When reviewing, identify the precise source of any error: the multiplication, the decimal placement or the interpretation of the question. MathsGenie's Multiplication and Division solutions provide further worked material for comparison.
For multiplying decimals past paper questions, apply the same routine and read the relevant mark scheme afterwards. Look for the working it rewards, not just the final answer.
Turn the method into a reliable habit
Our imagined student has moved from guessing where the decimal point belongs to explaining it. Your next challenge is making that method reliable when the numbers and context change. Start with MathsGenie's Lessons and Question Bank to practise multiplying decimals with clear working and a size check on every answer.



