Histograms GCSE Maths Mock Revision Guide
Histograms GCSE maths revision made clear with frequency density, two exam-style questions, common errors and a focused plan for your mock exam.

A histogram can look familiar enough to feel safe. It has bars, grouped data and labelled axes. Then a mock question gives the groups unequal widths, leaves part of a table blank, and suddenly the bars stop behaving like an ordinary bar chart.
That is the central idea behind histograms GCSE maths questions: the frequency is represented by the area of each bar, not simply its height. Once you understand that relationship, most histogram questions become a sequence of small, reliable calculations.
If your December mock is approaching, focus on three skills: calculating frequency density, drawing accurate bars and using a histogram to recover frequencies. This guide explains the method and works through two exam-style questions.
Your histogram mock revision checklist
Before the mock, make sure you can:
- calculate class width correctly;
- use the frequency density formula;
- complete a grouped frequency table;
- draw a histogram with a continuous horizontal scale;
- find a frequency from a bar's area;
- compare bars with different class widths;
- estimate a frequency within part of a class interval;
- show enough working to support your answer.
Histograms usually appear in the higher-tier content of GCSE Maths specifications, although schools can choose which topics to include in a mock. Check the paper coverage given by your teacher rather than assuming every topic will appear.
The one idea that makes histograms work
In an ordinary bar chart, the height of a bar can show its frequency. A histogram is different because its class intervals may have unequal widths.
Imagine two groups. One covers an interval of width 555, while another covers an interval of width 202020. If height alone represented frequency, the wider group would occupy much more space even when both groups contained the same number of values. That would make the diagram misleading.
A histogram solves this by using area:
area of bar=frequency\text{area of bar}=\text{frequency}area of bar=frequencySince the area of a rectangle is width multiplied by height:
class width×frequency density=frequency\text{class width}\times\text{frequency density}=\text{frequency}class width×frequency density=frequencyThis gives the formula you need to remember:
frequency density=frequencyclass width\text{frequency density}=\frac{\text{frequency}}{\text{class width}}frequency density=class widthfrequencyYou can rearrange it when a question gives you frequency density instead:
frequency=class width×frequency density\text{frequency}=\text{class width}\times\text{frequency density}frequency=class width×frequency densityThe vertical axis should therefore be labelled frequency density, unless the question defines another density scale.
A reliable method for histogram questions
Use the same routine every time.
Find each class width
Subtract the lower boundary from the upper boundary. For the interval 10<x≤2510<x\leq2510<x≤25:
class width=25−10=15\text{class width}=25-10=15class width=25−10=15Do not count the written integers in the interval. A continuous interval from 101010 to 252525 has width 151515.
Choose the correct form of the formula
If frequency is known and you need a bar height, divide:
frequency density=frequencyclass width\text{frequency density}=\frac{\text{frequency}}{\text{class width}}frequency density=class widthfrequencyIf the bar height is known and you need frequency, multiply:
frequency=class width×frequency density\text{frequency}=\text{class width}\times\text{frequency density}frequency=class width×frequency densityCheck the axes and scale
Histogram bars touch because the horizontal axis represents continuous numerical data. Mark class boundaries in the correct positions and use one consistent scale on the frequency density axis.
Ask whether the answer is exact or estimated
You can calculate the full frequency of a complete bar exactly when its width and density are known. If a question asks for the number within only part of a class, you normally assume values are distributed evenly through that class. The result is therefore an estimate.
For broader mock preparation, use the GCSE Maths revision resources to identify nearby topics that may appear alongside histograms, particularly averages, cumulative frequency and box plots.
Exam-style question: drawing a histogram
A delivery company records the time, ttt minutes, taken to complete 100100100 deliveries.
| Time, ttt minutes | Frequency |
|---|---|
| 0<t≤100<t\leq100<t≤10 | 151515 |
| 10<t≤2010<t\leq2010<t≤20 | 303030 |
| 20<t≤4020<t\leq4020<t≤40 | 404040 |
| 40<t≤7040<t\leq7040<t≤70 | 151515 |
Calculate the frequency density for each group and state the heights needed to draw the histogram.
First calculate each class width.
| Time, ttt minutes | Frequency | Class width | Frequency density |
|---|---|---|---|
| 0<t≤100<t\leq100<t≤10 | 151515 | 101010 | 1510=1.5\frac{15}{10}=1.51015=1.5 |
| 10<t≤2010<t\leq2010<t≤20 | 303030 | 101010 | 3010=3\frac{30}{10}=31030=3 |
| 20<t≤4020<t\leq4020<t≤40 | 404040 | 202020 | 4020=2\frac{40}{20}=22040=2 |
| 40<t≤7040<t\leq7040<t≤70 | 151515 | 303030 | 1530=0.5\frac{15}{30}=0.53015=0.5 |
The four bar heights are therefore:
1.5,3,2,0.51.5,\quad 3,\quad 2,\quad 0.51.5,3,2,0.5The second bar is the tallest, but the third group has the greatest frequency. This is an important distinction. The third bar is twice as wide as the second, so its area is larger:
20×2=4020\times2=4020×2=40By comparison, the second bar has area:
10×3=3010\times3=3010×3=30A common trap is to look for the tallest bar when asked for the group containing the most deliveries. In a histogram, compare areas, not heights.
When drawing the diagram, place the boundaries 000, 101010, 202020, 404040 and 707070 accurately along the horizontal axis. Label the vertical axis frequency density, use a sensible scale, and draw the bars touching.
Exam-style question: reading frequencies from a histogram
A histogram shows the distances, ddd kilometres, cycled by a group of students. The bar for 10<d≤2510<d\leq2510<d≤25 has a frequency density of 2.42.42.4.
Find the number of students in this class
The class width is:
25−10=1525-10=1525−10=15Use width multiplied by frequency density:
frequency=15×2.4=36\text{frequency}=15\times2.4=36frequency=15×2.4=36There are 363636 students in this class.
Estimate how many cycled more than 202020 kilometres but no more than 252525 kilometres
The required part has width:
25−20=525-20=525−20=5It occupies:
515=13\frac{5}{15}=\frac{1}{3}155=31of the full class interval. Assuming the values are evenly distributed within the class, the estimated frequency is:
13×36=12\frac{1}{3}\times36=1231×36=12So the estimate is 121212 students.
You could also use the area of that part of the bar directly:
5×2.4=125\times2.4=125×2.4=12This second approach is often faster. It also reinforces the main principle: area represents frequency.
The word estimate matters. The histogram tells us that 363636 values fall between 101010 and 252525, but not exactly where those values lie inside the interval. The calculation assumes an even spread.
How to organise your histograms mock revision
Reading notes can create a comforting sense of recognition, but recognition is not the same as being able to complete a question under time pressure. Your revision should move quickly from explanation to retrieval and practice.
Start with a short revision lesson and write the two formulas from memory. Then answer a small set of questions without notes. Mark them immediately and classify each error: class width, formula choice, arithmetic, scale or interpretation.
Next, complete mixed histograms exam questions so that the required method is not announced in advance. A real mock may ask you to complete a table, draw one missing bar, identify a frequency or estimate part of a group. The challenge is often deciding which calculation is needed.
Use MathsGenie GCSE past papers to practise the wider skill of locating and completing histogram questions within a full paper. Pair this with the site's GCSE revision page, where practice questions and video explanations can help you repair a specific gap rather than repeating material you already know.
A useful final step is to build a targeted practice paper in MathsGenie's Mock Exam Builder. Include histograms alongside connected data topics, complete it under timed conditions, and mark it carefully. Your mark scheme is not just a score sheet. It tells you whether the lost mark came from mathematical understanding or execution.
Common histogram slips examiners see
Using frequency as the bar height
This only works when every class has the same width and the chosen scale happens to support it. For unequal intervals, calculate frequency density.
Calculating class width incorrectly
For 30<x≤5030<x\leq5030<x≤50, the width is:
50−30=2050-30=2050−30=20It is not 212121. Histograms use continuous intervals, not a count of whole numbers.
Dividing in the wrong direction
The correct formula is:
frequency density=frequencyclass width\text{frequency density}=\frac{\text{frequency}}{\text{class width}}frequency density=class widthfrequencyWriting the formula before substituting values reduces the chance of reversing it.
Comparing heights instead of areas
A short, wide bar can represent a greater frequency than a tall, narrow bar. Calculate or compare areas when the question asks which class contains more observations.
Leaving gaps between bars
Histogram bars meet at the class boundaries because the data are continuous. Gaps suggest separate categories, as in a bar chart.
Misreading the vertical scale
Do not assume each small square represents 111. Read two labelled values, count the intervals between them and determine the value of each division.
Treating an estimate as exact
When finding a frequency from part of a class, make clear that the result is an estimate based on an even distribution within that interval.
Turn the method into marks
Histograms become manageable when you stop treating them as unusual pictures and start seeing them as rectangles whose areas carry meaning. Width is the class width. Height is frequency density. Area is frequency.
Before your mock, write those relationships from memory, practise both directions of the calculation, and complete questions with unequal class intervals. Then build a targeted paper in MathsGenie's Mock Exam Builder, work through it without notes and use the mark scheme to decide what to practise next. Focused revision is rarely about doing everything. It is about finding the next weak link and strengthening it.



