Error Intervals Exam Questions: GCSE Worked Answers
Error intervals exam questions explained through three GCSE worked examples. Learn rounding, truncation, inequality signs and how to show clear working.

You can understand rounding and still hesitate when a question asks for an error interval. The difficult part is often deciding exactly where the interval starts, where it stops, and which inequality signs belong between them.
To answer error intervals exam questions, identify the rounding unit, halve it, then subtract and add that amount to the stated value. Include the lower boundary and exclude the upper boundary. If the number has been truncated, use a different rule.
Below, imagine a student working through three increasingly demanding questions. These are original exam-style examples, with explanations of the working that supports credit. Exact mark allocations depend on the question and its mark scheme.
Your error intervals checklist
Before calculating, check:
- Has the value been rounded or truncated?
- What place value does the stated accuracy represent?
- Have you found both boundaries?
- Have you written an inequality using the requested letter?
- Does your answer make sense when you test the boundaries?
An error interval describes the possible original values before rounding or truncation. It does not mean somebody measured carelessly. Recording a measurement to a given accuracy naturally leaves some uncertainty.
The method for rounded values
Suppose a positive measurement is rounded to give rrr, using a rounding unit of uuu. Its error interval is:
r−u2≤x<r+u2r-\frac{u}{2}\leq x<r+\frac{u}{2}r−2u≤x<r+2uThe unit is the gap between consecutive possible rounded answers. For the nearest whole number, u=1u=1u=1. For the nearest tenth, u=0.1u=0.1u=0.1. For the nearest hundred, u=100u=100u=100.
The lower boundary is included because it rounds up to the stated answer. The upper boundary is excluded because it rounds up to the next answer instead.
If identifying that unit feels uncertain, the rounding lesson explains the place value behind it.
Use MathsGenie’s Error Intervals Lessons and Question Bank to practise this boundary routine without having to find suitable questions yourself.
Worked error intervals exam questions
Question: rounded to the nearest whole number
A parcel has mass mmm kilograms. Its mass is recorded as 8 kg8\text{ kg}8 kg, correct to the nearest kilogram. Write the error interval for mmm.
Our student first writes down the accuracy: nearest kilogram. That makes the rounding unit 1 kg1\text{ kg}1 kg, so half the unit is:
1÷2=0.51\div2=0.51÷2=0.5Subtract and add this amount:
8−0.5=7.58-0.5=7.58−0.5=7.5 8+0.5=8.58+0.5=8.58+0.5=8.5The completed answer, with mmm measured in kilograms, is:
7.5≤m<8.5\boxed{7.5\leq m<8.5}7.5≤m<8.5A quick boundary check explains the signs. A mass of 7.5 kg7.5\text{ kg}7.5 kg rounds to 8 kg8\text{ kg}8 kg, so it belongs. A mass of 8.5 kg8.5\text{ kg}8.5 kg rounds to 9 kg9\text{ kg}9 kg, so it does not.
Where credit comes from: finding the correct boundaries demonstrates the numerical understanding; completing the inequality demonstrates the interval. Some mark schemes allow partial credit for correct boundaries even when the notation is wrong. However, these may be accuracy marks rather than formal method marks, so always check the actual scheme.
Question: rounded to significant figures
A distance ddd metres is recorded as 4300 m4300\text{ m}4300 m, correct to two significant figures. Write its error interval.
The student pauses at the zeros. The useful question is: which place contains the second significant figure?
In 430043004300, the first significant digit is 444 and the second is 333. The 333 occupies the hundreds column. Therefore, the distance was rounded to the nearest hundred metres.
u=100,u2=50u=100,\qquad \frac{u}{2}=50u=100,2u=50Calculate the boundaries:
4300−50=42504300-50=42504300−50=4250 4300+50=43504300+50=43504300+50=4350With ddd measured in metres:
4250≤d<4350\boxed{4250\leq d<4350}4250≤d<4350Where credit comes from: the crucial reasoning is identifying hundreds as the rounding unit. Writing that down makes the method clear. The boundary calculations and correct inequality then complete the answer, although a short question may award marks only for the resulting values and notation.
The student now checks the interval’s width:
4350−4250=1004350-4250=1004350−4250=100That matches the rounding unit. This is a useful check whenever significant figures make the boundaries feel unfamiliar.
Stick-figure comic about a student discovering that reading the question is the key to revision
Question: truncation, rounding and a possible value
A positive number xxx is truncated to one decimal place, giving 4.74.74.7. Another positive number yyy is rounded to one decimal place, also giving 4.74.74.7. Write both error intervals. Could either original number have been 4.764.764.76?
This time, identical recorded answers hide different processes. The student underlines “truncated” and “rounded” before calculating.
Truncation removes digits after the required place. For a positive number truncated to one decimal place, the interval begins at the recorded value and extends to the next tenth:
4.7≤x<4.8\boxed{4.7\leq x<4.8}4.7≤x<4.8Rounding uses half the unit on either side. Here, half of 0.10.10.1 is 0.050.050.05:
4.65≤y<4.75\boxed{4.65\leq y<4.75}4.65≤y<4.75Now test the proposed original value:
4.7≤4.76<4.84.7\leq4.76<4.84.7≤4.76<4.8So xxx could have been 4.764.764.76. However:
4.76>4.754.76>4.754.76>4.75Therefore, yyy could not have been 4.764.764.76: it would round to 4.84.84.8.
Where credit comes from: each correct interval provides evidence of understanding. The final comparison needs a decision supported by the relevant boundaries. Writing only “yes” and “no” leaves out the reasoning a question asking for an explanation requires.
Common mistakes that lose marks
Using the full rounding unit. For the nearest tenth, subtracting and adding 0.10.10.1 produces an interval twice as wide as required. Halve the unit first.
Including the upper boundary. Under the usual GCSE rounding convention for positive values, the upper boundary rounds to the next recorded value. Use <<< there.
Replacing the upper boundary with a string of nines. Write x<8.5x<8.5x<8.5, rather than trying to invent a largest possible decimal below 8.58.58.5. There is always another value closer to that boundary.
Counting decimal places instead of significant figures. Locate the last significant digit before choosing the rounding unit.
Treating truncation as rounding. For positive values, truncation starts at the displayed number; rounding centres the interval on it. The OCR error intervals lesson offers another board-specific route through these ideas.
Exam-style practice
Try these without looking back at the worked examples:
- A length lll centimetres is 6.2 cm6.2\text{ cm}6.2 cm to the nearest tenth. Write its error interval.
- A population ppp is 58 00058\,00058000 to two significant figures. Write its error interval.
- A positive number ttt is truncated to two decimal places, giving 3.243.243.24. Could its original value be 3.2493.2493.249? Justify your answer.
Answers:
6.15≤l<6.256.15\leq l<6.256.15≤l<6.25 57 500≤p<58 50057\,500\leq p<58\,50057500≤p<58500 3.24≤t<3.253.24\leq t<3.253.24≤t<3.25The final answer is yes, because 3.2493.2493.249 lies inside that interval.
When attempting error intervals past paper questions, mark the boundaries, notation and explanations separately in your review. Record the specific mistake rather than simply labelling the topic difficult. If your next questions involve calculations with uncertain measurements, the bounds lesson develops that next step.
Turn the method into a reliable answer
Our hypothetical student now has a repeatable routine: identify the process, find the boundaries and check the signs. Your next step is to apply it when the wording changes and the answer is hidden. Start with the error intervals Lessons, then answer fresh questions in the MathsGenie Question Bank.



