Compound Measures Exam Questions: GCSE Worked Examples
Compound measures exam questions explained with three GCSE worked examples. Learn speed, density, pressure, unit conversions and how to show your method.

You recognise the formula, but the question still feels awkward. Should you convert the minutes first? Does density mean multiply or divide? Compound measures exam questions become easier when you identify the quantity required, match the units, then show your substitution clearly. Those steps also give an examiner evidence of your method if your final calculation goes wrong.
Imagine a student working through three questions: speed, density, then pressure. Each adds a complication, but the approach stays steady. These are original GCSE exam-style examples, rather than questions taken from a particular past paper.
The method for compound measures exam questions
A compound measure combines quantities. Speed relates distance to time, density relates mass to volume, and pressure relates force to area.
Average speed=total distancetotal time\text{Average speed}=\frac{\text{total distance}}{\text{total time}}Average speed=total timetotal distance Density=massvolume\text{Density}=\frac{\text{mass}}{\text{volume}}Density=volumemass Pressure=forcearea\text{Pressure}=\frac{\text{force}}{\text{area}}Pressure=areaforceThe word “per” means “for each”. A speed in km/h\mathrm{km/h}km/h tells you the distance travelled for each hour. Density in g/cm3\mathrm{g/cm^3}g/cm3 tells you the mass of each cubic centimetre.
Before calculating, follow this checklist:
- Identify what the question asks you to find.
- Write the relevant relationship and rearrange if necessary.
- Convert quantities into compatible units.
- Substitute the values and show the calculation.
- Check the answer, its unit and any requested rounding.
MathsGenie’s speed and density revision guide explains these relationships alongside unit choices.
Start applying this checklist through MathsGenie’s Lessons and Question Bank on the Speed and Density topic page, so you can move from reading a method to using it independently.
Speed: convert the time before dividing
Question: A cyclist travels 18 km18\,\mathrm{km}18km in 454545 minutes. Calculate their average speed in km/h\mathrm{km/h}km/h.
Our hypothetical student recognises distance divided by time. Their first instinct might be to divide by 454545, but they pause at the requested unit: kilometres per hour.
Convert the time into hours:
t=4560=0.75 ht=\frac{45}{60}=0.75\,\mathrm{h}t=6045=0.75hSubstitute into the formula:
v=180.75=24 km/hv=\frac{18}{0.75}=24\,\mathrm{km/h}v=0.7518=24km/hCheck: The cyclist covers 18 km18\,\mathrm{km}18km in less than an hour, so their speed in kilometres per hour should be greater than 181818.
Where the method marks come from
Writing 18÷0.7518\div0.7518÷0.75 shows a correct method using compatible units. This is the kind of working that can earn a method mark, even if an arithmetic slip follows. The final answer supplies the correct value and unit.
The exact allocation depends on the question’s mark scheme. The explanations here identify creditworthy steps, rather than promise a fixed number of marks.
Density: find the volume first
Question: A solid metal cuboid measures 5 cm5\,\mathrm{cm}5cm by 4 cm4\,\mathrm{cm}4cm by 3 cm3\,\mathrm{cm}3cm. Its density is 7.8 g/cm37.8\,\mathrm{g/cm^3}7.8g/cm3. Calculate its mass in kilograms.
This time, our student cannot substitute immediately. The question gives dimensions, so they must calculate the volume first.
Find the volume:
V=5×4×3=60 cm3V=5\times4\times3=60\,\mathrm{cm^3}V=5×4×3=60cm3Rearrange the density relationship:
Mass=density×volume\text{Mass}=\text{density}\times\text{volume}Mass=density×volumeCalculate the mass:
m=7.8×60=468 gm=7.8\times60=468\,\mathrm{g}m=7.8×60=468gConvert to the requested unit:
m=4681000=0.468 kgm=\frac{468}{1000}=0.468\,\mathrm{kg}m=1000468=0.468kgThe student keeps the volume in cubic centimetres because the density is given in grams per cubic centimetre. That makes the multiplication produce grams. Converting only the final mass keeps the working simple.
Where the method marks come from
The useful evidence is the volume calculation followed by density multiplied by volume. These show two distinct parts of the reasoning. A correct conversion then completes the answer in kilograms.
Writing only 0.4680.4680.468 hides those decisions. Clear working makes it possible to distinguish a sound method from an incorrect calculation. MathsGenie’s step-by-step Speed and Density lesson develops this connection between formulas and exam questions.
Pressure: convert an area and interpret the result
Question: A block exerts a force of 600 N600\,\mathrm{N}600N on a horizontal surface. Its rectangular contact face measures 20 cm20\,\mathrm{cm}20cm by 15 cm15\,\mathrm{cm}15cm. Calculate the pressure in pascals. The maximum permitted pressure is 18000 Pa18000\,\mathrm{Pa}18000Pa. Does the block exceed this limit?
The final question adds both an area conversion and a decision. Our student writes down what pascals require:
1 Pa=1 N/m21\,\mathrm{Pa}=1\,\mathrm{N/m^2}1Pa=1N/m2Convert the side lengths into metres:
20 cm=0.20 m,15 cm=0.15 m20\,\mathrm{cm}=0.20\,\mathrm{m},\qquad15\,\mathrm{cm}=0.15\,\mathrm{m}20cm=0.20m,15cm=0.15mCalculate the contact area:
A=0.20×0.15=0.03 m2A=0.20\times0.15=0.03\,\mathrm{m^2}A=0.20×0.15=0.03m2Calculate the pressure:
P=6000.03=20000 PaP=\frac{600}{0.03}=20000\,\mathrm{Pa}P=0.03600=20000PaMake the comparison:
20000>1800020000>1800020000>18000The block exceeds the maximum permitted pressure.
Where the method marks come from
Converting the lengths, calculating the area and dividing force by area make the route visible. The comparison answers the final instruction. Stopping at the pressure calculation leaves part of the question unanswered.
Notice the student's check: a small contact area produces a large pressure for the same force. This helps them judge whether the answer makes sense.
Common mistakes that lose marks
Treating minutes as decimal hours. A time of 454545 minutes is 0.750.750.75 hours, not 0.450.450.45 hours. Divide minutes by 606060.
Using the length conversion factor for area. Since 1 m=100 cm1\,\mathrm{m}=100\,\mathrm{cm}1m=100cm, it follows that 1 m2=10000 cm21\,\mathrm{m^2}=10000\,\mathrm{cm^2}1m2=10000cm2. Converting the side lengths before multiplying often avoids this trap.
Dividing automatically. The standard density formula contains division, but finding mass requires multiplication. Rearrange for the quantity you need before substituting.
Averaging two speeds directly. For a whole journey, divide total distance by total time. The ordinary mean of two speeds is appropriate only when the time spent at each speed is equal.
Assuming a formula alone guarantees a mark. Method marks reward relevant mathematical progress. Show the values being used, rather than leaving an unrelated formula beside an answer.
Exam-style practice: try the method yourself
Cover the answers and show each conversion and substitution.
- Speed: A runner covers 1500 m1500\,\mathrm{m}1500m in 666 minutes. Find their average speed in m/s\mathrm{m/s}m/s.
- Density: A material has mass 540 g540\,\mathrm{g}540g and density 2.7 g/cm32.7\,\mathrm{g/cm^3}2.7g/cm3. Find its volume.
- Pressure: A force of 360 N360\,\mathrm{N}360N acts over an area of 120 cm2120\,\mathrm{cm^2}120cm2. Find the pressure in pascals.
Answers: Speed: 256 m/s\frac{25}{6}\,\mathrm{m/s}625m/s, approximately 4.17 m/s4.17\,\mathrm{m/s}4.17m/s. Volume: 200 cm3200\,\mathrm{cm^3}200cm3. Pressure: 30000 Pa30000\,\mathrm{Pa}30000Pa.
When tackling compound measures past paper questions, compare your working with the mark scheme as well as checking the answer. Label any error as formula choice, conversion, arithmetic or interpretation. That tells you what to practise next.
The Speed and Density exam booklet provides further questions with answers. The equivalent AQA Speed and Density topic page also brings together lessons and question practice.
Turn the method into a habit
Our hypothetical student now has a repeatable approach: identify the measure, match the units and make each step visible. Your next challenge is recognising those steps without a worked answer beside you. Start with MathsGenie’s Lessons and Question Bank on Speed and Density to practise choosing and showing your own method.



