The Binomial Distribution: A-Level Maths Guide
Revise the binomial distribution for A-level Maths with clear methods, worked examples, common mistakes and exam-style questions with answers.

The Binomial Distribution: A-Level Maths Revision Guide
The binomial distribution in A-level Maths models the number of successes in a fixed number of independent trials. Each trial must have only two possible outcomes, and the probability of success must remain constant.
This guide explains how to recognise a binomial model, calculate exact and cumulative probabilities, find unknown parameters and use your calculator effectively. It also includes binomial distribution worked examples and exam-style questions with answers.
What is the binomial distribution?
A binomial random variable counts how many times a specified outcome occurs during a fixed number of repeated trials. The specified outcome is called a success, although it does not need to be something positive.
For example, a success could mean:
- a component is defective;
- a customer chooses a particular product;
- a six is rolled;
- a patient responds to a treatment.
If XXX is binomially distributed, the standard notation is
X∼B(n,p), X \sim \operatorname{B}(n,p), X∼B(n,p),where:
- nnn is the fixed number of trials;
- ppp is the probability of success on each trial;
- XXX is the number of successes;
- XXX can take the integer values 0,1,2,…,n0,1,2,\ldots,n0,1,2,…,n.
The probability of failure is 1−p1-p1−p and is sometimes written as qqq.
When can a binomial model be used?
A situation can be modelled using a binomial distribution when all four of the following conditions are satisfied.
- There is a fixed number of trials, nnn.
- Each trial has two possible outcomes, classified as success or failure.
- The probability of success, ppp, is constant for every trial.
- The trials are independent.
These conditions should be checked before carrying out any calculation. In an exam, a question asking whether a binomial model is suitable usually requires comments about independence and constant probability, not merely a statement that there are two outcomes.
For example, repeated draws from a bag without replacement are not normally independent because the contents of the bag change. A binomial model may therefore be unsuitable unless the item is replaced after every draw, or an approximation is explicitly justified.
The binomial probability formula
If X∼B(n,p)X \sim \operatorname{B}(n,p)X∼B(n,p), then
P(X=r)=(nr)pr(1−p)n−r, P(X=r)=\binom{n}{r}p^r(1-p)^{n-r}, P(X=r)=(rn)pr(1−p)n−r,where rrr is a possible number of successes.
The parts of the formula have distinct meanings:
- (nr)\binom{n}{r}(rn) counts the ways in which the rrr successes can be positioned among the nnn trials;
- prp^rpr represents the probability of the rrr successes;
- (1−p)n−r(1-p)^{n-r}(1−p)n−r represents the probability of the remaining failures.
The combination is
(nr)=n!r!(n−r)!. \binom{n}{r}=\frac{n!}{r!(n-r)!}. (rn)=r!(n−r)!n!.Most A-level calculations can be completed using a calculator's binomial probability functions. However, understanding the formula is important because it explains the model and may be required when an exact expression must be shown.
The binomial distribution worked examples
Worked example 1: An exact probability
A biased coin has probability 0.40.40.4 of landing on heads. It is tossed 888 times. Find the probability of obtaining exactly 333 heads.
Let XXX be the number of heads. The number of trials is fixed, the outcomes are heads or not heads, the probability is constant and the tosses are independent. Therefore,
X∼B(8,0.4). X \sim \operatorname{B}(8,0.4). X∼B(8,0.4).Using the probability formula,
P(X=3)=(83)(0.4)3(0.6)5. P(X=3)=\binom{8}{3}(0.4)^3(0.6)^5. P(X=3)=(38)(0.4)3(0.6)5.This gives
P(X=3)=0.27869184. P(X=3)=0.27869184. P(X=3)=0.27869184.Therefore, to 333 significant figures,
P(X=3)=0.279. P(X=3)=0.279. P(X=3)=0.279.Worked example 2: At most and fewer than
Suppose X∼B(12,0.3)X \sim \operatorname{B}(12,0.3)X∼B(12,0.3). Find P(X≤4)P(X\leq 4)P(X≤4).
The phrase at most 4 includes 0,1,2,30,1,2,30,1,2,3 and 444. Therefore,
P(X≤4)=∑r=04(12r)(0.3)r(0.7)12−r. P(X\leq 4)=\sum_{r=0}^{4}\binom{12}{r}(0.3)^r(0.7)^{12-r}. P(X≤4)=r=0∑4(r12)(0.3)r(0.7)12−r.Using a calculator's cumulative binomial function gives
P(X≤4)=0.723655… P(X\leq 4)=0.723655\ldots P(X≤4)=0.723655…Hence
P(X≤4)=0.724 P(X\leq 4)=0.724 P(X≤4)=0.724to 333 significant figures.
Be careful with fewer than 4, which means X<4X<4X<4 and is equivalent to X≤3X\leq 3X≤3 because XXX only takes integer values.
Worked example 3: At least one success
A machine produces a faulty component with probability 0.060.060.06. Assume components are independent. Find the probability that at least one of the next 101010 components is faulty.
Let XXX be the number of faulty components. Then
X∼B(10,0.06). X \sim \operatorname{B}(10,0.06). X∼B(10,0.06).Calculating P(X≥1)P(X\geq 1)P(X≥1) directly would require adding several probabilities. It is quicker to use the complement:
P(X≥1)=1−P(X=0). P(X\geq 1)=1-P(X=0). P(X≥1)=1−P(X=0).Therefore,
P(X≥1)=1−(0.94)10=0.461384… P(X\geq 1)=1-(0.94)^{10}=0.461384\ldots P(X≥1)=1−(0.94)10=0.461384…So the required probability is
P(X≥1)=0.461 P(X\geq 1)=0.461 P(X≥1)=0.461to 333 significant figures.
Translating words into inequalities
Many errors in binomial questions come from translating the wording incorrectly.
| Wording | Mathematical statement |
|---|---|
| Exactly kkk | X=kX=kX=k |
| At most kkk | X≤kX\leq kX≤k |
| No more than kkk | X≤kX\leq kX≤k |
| Fewer than kkk | X<kX<kX<k, so X≤k−1X\leq k-1X≤k−1 |
| At least kkk | X≥kX\geq kX≥k |
| More than kkk | X>kX>kX>k, so X≥k+1X\geq k+1X≥k+1 |
| Between aaa and bbb inclusive | a≤X≤ba\leq X\leq ba≤X≤b |
Write the inequality before using your calculator. This small step helps prevent one of the most common sources of lost marks.
Cumulative probabilities and complements
A calculator's cumulative binomial function usually evaluates a probability of the form
P(X≤r). P(X\leq r). P(X≤r).Other probability statements can be rewritten in this form. Because a binomial random variable takes integer values,
P(X<r)=P(X≤r−1), P(X<r)=P(X\leq r-1), P(X<r)=P(X≤r−1), P(X≥r)=1−P(X≤r−1), P(X\geq r)=1-P(X\leq r-1), P(X≥r)=1−P(X≤r−1),and
P(X>r)=1−P(X≤r). P(X>r)=1-P(X\leq r). P(X>r)=1−P(X≤r).For an inclusive interval,
P(a≤X≤b)=P(X≤b)−P(X≤a−1). P(a\leq X\leq b)=P(X\leq b)-P(X\leq a-1). P(a≤X≤b)=P(X≤b)−P(X≤a−1).Worked example 4: An interval probability
Let X∼B(20,0.25)X \sim \operatorname{B}(20,0.25)X∼B(20,0.25). Find P(4≤X≤7)P(4\leq X\leq 7)P(4≤X≤7).
Rewrite the interval using cumulative probabilities:
P(4≤X≤7)=P(X≤7)−P(X≤3). P(4\leq X\leq 7)=P(X\leq 7)-P(X\leq 3). P(4≤X≤7)=P(X≤7)−P(X≤3).Using cumulative binomial values,
P(X≤7)=0.898188… P(X\leq 7)=0.898188\ldots P(X≤7)=0.898188…and
P(X≤3)=0.225156… P(X\leq 3)=0.225156\ldots P(X≤3)=0.225156…Therefore,
P(4≤X≤7)=0.673032…=0.673 P(4\leq X\leq 7)=0.673032\ldots=0.673 P(4≤X≤7)=0.673032…=0.673to 333 significant figures.
The mean and variance of a binomial distribution
If
X∼B(n,p), X \sim \operatorname{B}(n,p), X∼B(n,p),then the mean is
E(X)=np, E(X)=np, E(X)=np,and the variance is
Var(X)=np(1−p). \operatorname{Var}(X)=np(1-p). Var(X)=np(1−p).The standard deviation is therefore
np(1−p). \sqrt{np(1-p)}. np(1−p).The mean is the expected number of successes over many repetitions of the experiment. It does not need to be an integer, even though XXX itself can only take integer values.
Worked example 5: Mean and standard deviation
Suppose X∼B(50,0.2)X \sim \operatorname{B}(50,0.2)X∼B(50,0.2).
The mean is
E(X)=50(0.2)=10. E(X)=50(0.2)=10. E(X)=50(0.2)=10.The variance is
Var(X)=50(0.2)(0.8)=8. \operatorname{Var}(X)=50(0.2)(0.8)=8. Var(X)=50(0.2)(0.8)=8.The standard deviation is
8=22≈2.83. \sqrt{8}=2\sqrt{2}\approx 2.83. 8=22≈2.83.Finding an unknown parameter
A question may provide a probability and ask you to find ppp or nnn. You must first express the information using the binomial model, then solve the resulting equation.
Worked example 6: Finding ppp
The probability that none of 555 independent items passes a test is 0.168070.168070.16807. Each item has the same probability ppp of passing. Find ppp.
Let XXX be the number of items that pass. Then
X∼B(5,p). X \sim \operatorname{B}(5,p). X∼B(5,p).The information gives
P(X=0)=(1−p)5=0.16807. P(X=0)=(1-p)^5=0.16807. P(X=0)=(1−p)5=0.16807.Taking the fifth root,
1−p=0.7. 1-p=0.7. 1−p=0.7.Therefore,
p=0.3. p=0.3. p=0.3.When nnn is unknown, it may be necessary to use logarithms after setting up an equation such as (1−p)n=k(1-p)^n=k(1−p)n=k.
Using a calculator accurately
Calculator menus differ, but binomial functions are commonly separated into:
- binomial probability, for P(X=r)P(X=r)P(X=r);
- binomial cumulative probability, for P(X≤r)P(X\leq r)P(X≤r).
Enter nnn, ppp and the required value of rrr carefully. If the question asks for an upper-tail probability such as P(X≥r)P(X\geq r)P(X≥r), use the complement unless your calculator offers a suitable interval function.
Keep the full calculator value during intermediate calculations and round only the final answer. Unless a question states otherwise, 333 significant figures is normally an appropriate level of accuracy for a non-exact probability.
Common mistakes in binomial distribution questions
Assuming every repeated experiment is binomial
Check all four conditions. Sampling without replacement can make trials dependent and change the probability from trial to trial.
Using the wrong value of ppp
The value of ppp must match the event defined as success. If XXX counts faulty items and the probability of a working item is 0.970.970.97, then p=0.03p=0.03p=0.03, not 0.970.970.97.
Confusing strict and inclusive inequalities
For an integer-valued random variable, X<5X<5X<5 means X≤4X\leq 4X≤4. Similarly, X>5X>5X>5 means X≥6X\geq 6X≥6.
Using the wrong complement
The complement of X≥rX\geq rX≥r is X≤r−1X\leq r-1X≤r−1, not X≤rX\leq rX≤r. Writing the events before calculating makes the boundary clear.
Omitting the model
When a context is given, define the random variable and state its distribution, for example
X=number of successful trials,X∼B(n,p). X=\text{number of successful trials}, \qquad X\sim\operatorname{B}(n,p). X=number of successful trials,X∼B(n,p).This communicates your method clearly and may earn method marks even if a later numerical error occurs.
Rounding too early
Store calculator values or copy several decimal places into later calculations. Early rounding can move a final answer outside an accepted accuracy range.
The binomial distribution exam questions
Embedded exam-style question
A manufacturer states that 85%85\%85% of its batteries last for at least 500500500 charging cycles. A random sample of 121212 batteries is tested. Assume the outcomes are independent.
- Find the probability that exactly 101010 batteries last for at least 500500500 cycles.
- Find the probability that at least 101010 batteries last for at least 500500500 cycles.
- Find the expected number of batteries that last for at least 500500500 cycles.
Let XXX be the number of batteries that last for at least 500500500 cycles. Then
X∼B(12,0.85). X\sim\operatorname{B}(12,0.85). X∼B(12,0.85).For part 1,
P(X=10)=(1210)(0.85)10(0.15)2=0.292, approximately. P(X=10)=\binom{12}{10}(0.85)^{10}(0.15)^2=0.292\text{, approximately}. P(X=10)=(1012)(0.85)10(0.15)2=0.292, approximately.For part 2,
P(X≥10)=P(X=10)+P(X=11)+P(X=12)=0.736, approximately. P(X\geq 10)=P(X=10)+P(X=11)+P(X=12)=0.736\text{, approximately}. P(X≥10)=P(X=10)+P(X=11)+P(X=12)=0.736, approximately.Equivalently, use
P(X≥10)=1−P(X≤9). P(X\geq 10)=1-P(X\leq 9). P(X≥10)=1−P(X≤9).For part 3,
E(X)=np=12(0.85)=10.2. E(X)=np=12(0.85)=10.2. E(X)=np=12(0.85)=10.2.The expected value is a long-run average, so it does not need to be a possible observed value.
Try 4 more binomial distribution practice questions and use the accompanying answers or mark scheme to check both your method and final accuracy.
Further exam-style practice questions with answers
Question 1
A biased die has probability 0.30.30.3 of landing on six. It is rolled 151515 times independently. Find the probability of obtaining fewer than 444 sixes.
Answer: If X∼B(15,0.3)X\sim\operatorname{B}(15,0.3)X∼B(15,0.3), then
P(X<4)=P(X≤3)=0.297, approximately. P(X<4)=P(X\leq 3)=0.297\text{, approximately}. P(X<4)=P(X≤3)=0.297, approximately.Question 2
For X∼B(25,0.4)X\sim\operatorname{B}(25,0.4)X∼B(25,0.4), find P(8≤X≤12)P(8\leq X\leq 12)P(8≤X≤12).
Answer:
P(8≤X≤12)=P(X≤12)−P(X≤7)=0.732, approximately. P(8\leq X\leq 12)=P(X\leq 12)-P(X\leq 7)=0.732\text{, approximately}. P(8≤X≤12)=P(X≤12)−P(X≤7)=0.732, approximately.Question 3
A student answers 101010 independent multiple-choice questions by guessing. Each question has four possible answers, exactly one of which is correct. Find the probability that the student answers at least one question correctly.
Answer: If X∼B(10,0.25)X\sim\operatorname{B}(10,0.25)X∼B(10,0.25), then
P(X≥1)=1−P(X=0)=1−(0.75)10=0.944, approximately. P(X\geq 1)=1-P(X=0)=1-(0.75)^{10}=0.944\text{, approximately}. P(X≥1)=1−P(X=0)=1−(0.75)10=0.944, approximately.Question 4
A binomial random variable has parameters n=20n=20n=20 and ppp. Its mean is 777. Find ppp and the variance.
Answer: Since np=7np=7np=7,
20p=7, 20p=7, 20p=7,so
p=0.35. p=0.35. p=0.35.The variance is
np(1−p)=20(0.35)(0.65)=4.55. np(1-p)=20(0.35)(0.65)=4.55. np(1−p)=20(0.35)(0.65)=4.55.How to revise the binomial distribution effectively
Begin by learning the four modelling conditions and the meanings of nnn, ppp and XXX. Then practise translating phrases such as at most, fewer than and at least into inequalities before calculating.
Your revision should include exact probabilities, cumulative probabilities, complements, intervals, means, variances and unknown parameters. After topic questions, use A-level past papers and mark schemes to practise deciding which method is required without being told explicitly.
The linked GCSE maths topics by exam board and tier page is not an A-level specification guide, but it can help if you need to revisit foundational probability skills before attempting binomial questions.
Conclusion
For a binomial model, there must be a fixed number of independent trials, two possible outcomes and a constant probability of success. Once you have written X∼B(n,p)X\sim\operatorname{B}(n,p)X∼B(n,p), translate the wording carefully and decide whether to use an exact probability, a cumulative probability or a complement.
Remember that E(X)=npE(X)=npE(X)=np and Var(X)=np(1−p)\operatorname{Var}(X)=np(1-p)Var(X)=np(1−p). MathsGenie practice questions, past papers and mark schemes can then help you apply these facts accurately under exam conditions.



