Area Under a Curve GCSE Maths Mock Revision
Area under a curve GCSE maths revision made clear with two worked exam questions, common mistakes and a focused plan for your December mock exam.

A December mock has a habit of feeling distant until it suddenly does not. One week, there is plenty of time. The next, a curved graph is asking for an estimated area and every trapezium seems to have acquired an extra side.
The good news is that area under a curve GCSE maths questions follow a manageable method. You divide the region into strips, approximate each strip with a trapezium, then add the areas. On a velocity-time graph, that area represents distance travelled, provided the velocity remains non-negative.
This guide follows a Year 11 student preparing for December mocks. It explains the method, works through two exam-style questions and shows how to turn mistakes into targeted practice.
A Year 11 pupil discovers that December has arrived with plenty of notice
Your area under a curve checklist
Before attempting an exam question, check that you can:
- identify the interval covered by the question;
- find the width of each strip;
- read the two vertical heights at the ends of each strip;
- use the trapezium area formula accurately;
- add all the trapezium estimates;
- include appropriate units;
- explain whether an estimate is likely to be too large or too small when the graph's shape makes this clear.
This topic is usually connected to velocity-time graphs at GCSE. MathsGenie's Velocity-Time Graphs exam booklet provides focused questions with answers, while the AQA velocity-time graph questions include practice estimating an area with equal strips.
What area under a curve means at GCSE
For a straight-sided shape, exact area formulae work neatly. A curve creates a different problem because the upper boundary changes continuously. At GCSE, you are normally asked to estimate the area rather than find its exact value.
The region is divided into strips. Each curved strip is treated as a trapezium, giving the formula:
A=12(a+b)hA = \frac{1}{2}(a+b)hA=21(a+b)hHere, aaa and bbb are the parallel vertical sides and hhh is the horizontal strip width. In a graph question, it can be clearer to write:
trapezium area=12(left height+right height)×width\text{trapezium area}=\frac{1}{2}(\text{left height}+\text{right height})\times\text{width}trapezium area=21(left height+right height)×widthThe order matters less than understanding what each value represents. The two heights come from consecutive points on the graph. The width is the horizontal distance between them.
If all strips have equal width hhh, the whole estimate can also be written as:
A≈h2(y0+2y1+2y2+⋯+2yn−1+yn)A\approx\frac{h}{2}\left(y_0+2y_1+2y_2+\cdots+2y_{n-1}+y_n\right)A≈2h(y0+2y1+2y2+⋯+2yn−1+yn)Notice the pattern. The first and last heights are used once, while every internal height is used twice. This is simply a shorter way of adding the individual trapezia.
Exam-style question: estimating from a table
A curve passes through the following points.
| xxx | 000 | 222 | 444 | 666 | 888 |
|---|---|---|---|---|---|
| yyy | 333 | 777 | 999 | 888 | 555 |
Use four strips to estimate the area under the curve from x=0x=0x=0 to x=8x=8x=8.
The values of xxx increase by 222, so each strip has width:
h=2h=2h=2Using the compact trapezium rule:
A≈22(3+2(7)+2(9)+2(8)+5)A\approx\frac{2}{2}\left(3+2(7)+2(9)+2(8)+5\right)A≈22(3+2(7)+2(9)+2(8)+5) A≈1(3+14+18+16+5)A\approx 1\left(3+14+18+16+5\right)A≈1(3+14+18+16+5) A≈56A\approx56A≈56The estimated area is therefore:
56 square units\boxed{56\text{ square units}}56 square unitsA reliable check is to count the intervals, not the coordinates. Five coordinate values create four strips. Confusing the number of points with the number of strips is one of the easiest ways to lose marks.
Exam-style question: area on a velocity-time graph
A car's velocity is recorded every 222 seconds.
| Time in seconds, ttt | 000 | 222 | 444 | 666 |
|---|---|---|---|---|
| Velocity in metres per second, vvv | 000 | 555 | 999 | 121212 |
Use three trapezia to estimate the distance travelled during the first 666 seconds.
Each strip has width 222 seconds. Calculate the trapezia separately:
A1=12(0+5)×2=5A_1=\frac{1}{2}(0+5)\times2=5A1=21(0+5)×2=5 A2=12(5+9)×2=14A_2=\frac{1}{2}(5+9)\times2=14A2=21(5+9)×2=14 A3=12(9+12)×2=21A_3=\frac{1}{2}(9+12)\times2=21A3=21(9+12)×2=21Add the three estimates:
distance=5+14+21=40\text{distance}=5+14+21=40distance=5+14+21=40So the estimated distance travelled is:
40 m\boxed{40\text{ m}}40 mThe units explain why this works:
ms×s=m\frac{\text{m}}{\text{s}}\times\text{s}=\text{m}sm×s=mVelocity multiplied by time gives displacement. Where all velocities shown are non-negative, this is also the distance travelled. You can compare your method with MathsGenie's worked velocity-time graph question.
Why more strips usually improve the estimate
A trapezium replaces part of a curve with a straight line. If the strips are wide, that straight line may fit the curve poorly. Narrower strips tend to follow the curve more closely, so using more strips will generally improve the approximation.
That does not automatically tell you whether the result is an overestimate or an underestimate. Look at the graph:
- if the straight tops of the trapezia mostly lie above the curve, the result is an overestimate;
- if they mostly lie below the curve, the result is an underestimate;
- if the curve changes shape, different errors may partly cancel.
Do not guess from whether the curve rises or falls. A rising graph can still produce either type of estimate. The important feature is how the curve bends relative to the straight line joining consecutive points.
Common slips examiners see
Using the triangle formula
Students sometimes calculate 12×base×height\frac{1}{2}\times\text{base}\times\text{height}21×base×height. That only works when one parallel side has length 000. Most strips have two non-zero heights, so both must be included.
Forgetting the half
Writing (a+b)h(a+b)h(a+b)h doubles every trapezium. Write the complete formula before inserting values:
A=12(a+b)hA=\frac{1}{2}(a+b)hA=21(a+b)hUsing the wrong strip width
The width is the change in the horizontal coordinate. If the times are 000, 222, 444 and 666, the width is 222, not 666.
Counting points instead of intervals
Four points make three strips. Mark the intervals on the table or graph before calculating.
Missing or incorrect units
Ordinary area is written in square units, such as cm2\text{cm}^2cm2. Area under a velocity-time graph gives distance or displacement, so the answer is measured in units such as metres.
Rounding too early
Keep the calculator value during your working and round only at the end, unless the question gives a specific instruction.
Giving an exact answer sign
The trapezium method gives an estimate, so use ≈\approx≈ during the calculation or describe the final result as an estimate.
A focused area under a curve mock revision plan
Reading the method once can make it feel familiar. Solving questions reveals whether it is secure. Before your December mock, use three short sessions rather than one long session.
In the first session, practise identifying widths and heights without doing full calculations. In the second, complete several area under a curve exam questions and mark every line. In the third, answer mixed graph questions under timed conditions.
Keep a brief error log. Record whether each lost mark came from the formula, graph reading, arithmetic, interpretation or units. That turns a vague feeling of being bad at the topic into a specific task you can fix.
MathsGenie brings together free revision lessons, practice questions, exam booklets, answers and video support. Once you know which step needs work, use the Mock Exam Builder to build a targeted practice paper containing the questions you actually need. Complete it without notes, mark it carefully, then revisit only the gaps. That is how mock revision becomes smaller, calmer and more useful.



