Engineers are testing two systems that use radioactive sources.
A radioactive source has an initial activity of 12 800 Bq12\,800\ \text{Bq}12800 Bq and a half-life of 20 days. A detector records one count for every eight nuclei that decay in the source.
Calculate the total number of counts recorded by the detector during a 30-second interval, 80 days after the initial activity was measured.
A manufacturer uses a radiation source and a detector to check whether a thin paper membrane has been fitted over an opening. The source and detector are 2 cm apart, with the membrane between them.
An indicator switches on when the count-rate is below 100 counts per second. The indicator should switch on only when the membrane is present.
The table shows the results obtained using three different sources.
| Radiation emitted | Count-rate without membrane in counts per second | Count-rate with membrane in counts per second |
|---|---|---|
| Alpha | 480 | 0 |
| Beta | 465 | 452 |
| Gamma | 472 | 469 |
Explain which type of radiation should be used. The manufacturer later puts a 1 mm thick aluminium support plate permanently between the source and the detector. Explain how this plate would affect the operation of the system.
95 exam-style questions on AQA GCSE Physics 4.2 Atoms and nuclear radiation, covering 4.2.1 Radioactive decay and nuclear radiation, 4.2.2 Nuclear equations, 4.2.3 Half-lives and the random nature of radioactive decay, and 4.2.4 Radioactive contamination. Each one has a worked solution and a mark scheme showing where the marks go.