An engineer tests a sound-monitoring system in a long, straight ventilation duct. A short, sharp sound is produced at one end of the duct. Two microphones connected to a data logger are fixed at different positions along the duct. The data logger's clock is started shortly before the sound is produced, and the data logger records the clock reading when the sound first arrives at each microphone.
The table shows the measurements recorded by the engineer.
| Microphone | Distance from the sound source in m | Data logger reading in ms |
|---|---|---|
| A | 2.40 | 12.0 |
| B | 9.20 | 31.9 |
Use the measurements to calculate the speed of sound between the microphones.
Give your answer to 3 significant figures.
The data logger records each reading to the nearest 0.1 ms. The sound can still be detected clearly if microphone B is moved farther from microphone A.
Explain how moving microphone B farther from microphone A would affect the percentage uncertainty in the measured time delay.
98 exam-style questions on AQA GCSE Physics 6.1 Waves in air, fluids and solids, covering 6.1.1 Transverse and longitudinal waves, 6.1.2 Properties of waves, 6.1.3 Reflection of waves, 6.1.4 Sound waves (HT only), and 6.1.5 Waves for detection and exploration (HT only). Each one has a worked solution and a mark scheme showing where the marks go.