Skip to content

Course home

Revision guides·7.1 The characteristic properties of acids and bases
Sign up

7.1 The characteristic properties of acids and bases

7.1.1 Properties of acids and their effect on indicators

Acids and metals

Definition

Salt

A compound formed when the hydrogen in an acid is replaced by a metal ion or an ammonium ion.

Definition

Effervescence

The rapid release of bubbles of gas from a liquid during a chemical reaction.

  1. A dilute acid reacts with many metals to form a salt and hydrogen gas.

  2. The general word equation for this reaction is shown below.

    metal+acid→salt+hydrogen \text{metal} + \text{acid} \rightarrow \text{salt} + \text{hydrogen} metal+acid→salt+hydrogen
  3. Hydrogen is a gas, so it escapes from the mixture as bubbles and you see effervescence around the metal.

  4. The piece of metal gets smaller and finally disappears, because its atoms are used up to make the salt.

  5. The salts formed in these reactions are usually soluble, so the salt stays dissolved and the mixture ends as a clear solution.

  6. The reaction gives out thermal energy, so the test tube feels warm.

  7. The name of the salt has two parts: the metal gives the first word and the acid gives the second.

    1. Hydrochloric acid, HCl\text{HCl}HCl, forms salts called chlorides.
    2. Sulfuric acid, H2SO4\text{H}_2\text{SO}_4H2​SO4​, forms salts called sulfates.
    3. Nitric acid, HNO3\text{HNO}_3HNO3​, forms salts called nitrates.
  8. Not every metal reacts, because metals of low reactivity such as copper, silver and gold do not react with dilute acids at all.

Example

Magnesium and hydrochloric acid

  • Magnesium is the metal and hydrochloric acid makes chlorides, so the salt formed is magnesium chloride.
magnesium+hydrochloric acid→magnesium chloride+hydrogen \text{magnesium} + \text{hydrochloric acid} \rightarrow \text{magnesium chloride} + \text{hydrogen} magnesium+hydrochloric acid→magnesium chloride+hydrogen
  • Magnesium forms Mg2+\text{Mg}^{2+}Mg2+ ions and chloride ions are Cl−\text{Cl}^{-}Cl−, so the formula of the salt is MgCl2\text{MgCl}_2MgCl2​.
  • Two HCl\text{HCl}HCl units are needed to supply the two chloride ions, and their two hydrogen atoms make one H2\text{H}_2H2​ molecule.
Mg(s)+2HCl(aq)→MgCl2(aq)+H2(g) \text{Mg(s)} + 2\text{HCl(aq)} \rightarrow \text{MgCl}_2\text{(aq)} + \text{H}_2\text{(g)} Mg(s)+2HCl(aq)→MgCl2​(aq)+H2​(g)
  • In the same way, zinc and sulfuric acid give zinc sulfate and hydrogen.
Zn(s)+H2SO4(aq)→ZnSO4(aq)+H2(g) \text{Zn(s)} + \text{H}_2\text{SO}_4\text{(aq)} \rightarrow \text{ZnSO}_4\text{(aq)} + \text{H}_2\text{(g)} Zn(s)+H2​SO4​(aq)→ZnSO4​(aq)+H2​(g)

Acids and bases

  1. An acid reacts with a base to form a salt and water only.

    base+acid→salt+water \text{base} + \text{acid} \rightarrow \text{salt} + \text{water} base+acid→salt+water
  2. Bases include metal oxides, such as copper(II) oxide, and metal hydroxides, such as sodium hydroxide.

  3. No gas is made in this reaction, so there is no fizzing.

  4. When black copper(II) oxide is warmed with dilute sulfuric acid, the black solid disappears and the colourless acid turns blue as copper(II) sulfate forms.

  5. When sodium hydroxide solution is added to hydrochloric acid, both solutions and the products are colourless, so the only sign of reaction is a small rise in temperature.

  6. The salt is named in the same way as before, with the metal from the base and the ending from the acid.

Example

Copper(II) oxide and sulfuric acid

  • Copper(II) oxide supplies the metal and sulfuric acid makes sulfates, so the salt is copper(II) sulfate.
copper(II) oxide+sulfuric acid→copper(II) sulfate+water \text{copper(II) oxide} + \text{sulfuric acid} \rightarrow \text{copper(II) sulfate} + \text{water} copper(II) oxide+sulfuric acid→copper(II) sulfate+water CuO(s)+H2SO4(aq)→CuSO4(aq)+H2O(l) \text{CuO(s)} + \text{H}_2\text{SO}_4\text{(aq)} \rightarrow \text{CuSO}_4\text{(aq)} + \text{H}_2\text{O(l)} CuO(s)+H2​SO4​(aq)→CuSO4​(aq)+H2​O(l)
  • Sodium hydroxide and hydrochloric acid react in the same pattern to give sodium chloride and water.
NaOH(aq)+HCl(aq)→NaCl(aq)+H2O(l) \text{NaOH(aq)} + \text{HCl(aq)} \rightarrow \text{NaCl(aq)} + \text{H}_2\text{O(l)} NaOH(aq)+HCl(aq)→NaCl(aq)+H2​O(l)

Acids and carbonates

  1. An acid reacts with a carbonate to form a salt, water and carbon dioxide.

    carbonate+acid→salt+water+carbon dioxide \text{carbonate} + \text{acid} \rightarrow \text{salt} + \text{water} + \text{carbon dioxide} carbonate+acid→salt+water+carbon dioxide
  2. Carbon dioxide is a gas, so the mixture shows effervescence.

  3. A solid carbonate, such as calcium carbonate in the form of marble chips, gets smaller and disappears if enough acid is present.

  4. The fizzing stops when either the carbonate or the acid has been completely used up.

  5. Compared with a metal, a carbonate gives carbon dioxide rather than hydrogen, and it also produces water.

Example

Calcium carbonate and hydrochloric acid

  • Calcium carbonate supplies the metal and hydrochloric acid makes chlorides, so the salt is calcium chloride.
calcium carbonate+hydrochloric acid→calcium chloride+water+carbon dioxide \text{calcium carbonate} + \text{hydrochloric acid} \rightarrow \text{calcium chloride} + \text{water} + \text{carbon dioxide} calcium carbonate+hydrochloric acid→calcium chloride+water+carbon dioxide CaCO3(s)+2HCl(aq)→CaCl2(aq)+H2O(l)+CO2(g) \text{CaCO}_3\text{(s)} + 2\text{HCl(aq)} \rightarrow \text{CaCl}_2\text{(aq)} + \text{H}_2\text{O(l)} + \text{CO}_2\text{(g)} CaCO3​(s)+2HCl(aq)→CaCl2​(aq)+H2​O(l)+CO2​(g)
  • Sodium carbonate and sulfuric acid follow the same pattern to give sodium sulfate.
Na2CO3(s)+H2SO4(aq)→Na2SO4(aq)+H2O(l)+CO2(g) \text{Na}_2\text{CO}_3\text{(s)} + \text{H}_2\text{SO}_4\text{(aq)} \rightarrow \text{Na}_2\text{SO}_4\text{(aq)} + \text{H}_2\text{O(l)} + \text{CO}_2\text{(g)} Na2​CO3​(s)+H2​SO4​(aq)→Na2​SO4​(aq)+H2​O(l)+CO2​(g)
Practical

Test-tube reactions of a dilute acid

  • Aim: to observe how dilute hydrochloric acid reacts with a metal, a base and a carbonate, and to identify any gas given off.
  • Apparatus: test tubes in a rack, test-tube holder, dilute hydrochloric acid, 10 cm310\ \text{cm}^310 cm3 measuring cylinder, magnesium ribbon cut into 2 cm2\ \text{cm}2 cm strips, copper(II) oxide powder, marble chips, spatula, bung fitted with a delivery tube, limewater, wooden splints, Bunsen burner, heat-resistant mat and eye protection.
  • Method, acid and metal:
    • Pour 3 cm33\ \text{cm}^33 cm3 of dilute hydrochloric acid into a test tube standing in the rack.
    • Drop in one strip of magnesium ribbon and watch the surface of the metal closely.
    • Feel the outside of the tube near the bottom to check for any temperature change.
    • Hold a lighted splint at the mouth of the tube while the bubbling is steady.
  • Method, acid and base:
    • Add half a spatula of black copper(II) oxide to 3 cm33\ \text{cm}^33 cm3 of the acid in a clean tube.
    • Hold the tube in a test-tube holder and warm it gently in a Bunsen flame, pointing the mouth away from everyone and shaking it gently.
    • Stop heating before the liquid boils and note the colour of the solution.
  • Method, acid and carbonate:
    • Pour 3 cm33\ \text{cm}^33 cm3 of limewater into a second tube and stand it in the rack.
    • Place two small marble chips in a clean tube and add 5 cm35\ \text{cm}^35 cm3 of the acid.
    • Fit the bung straight away and let the gas bubble through the limewater.
  • Results:
    • Magnesium fizzes quickly, gets smaller and disappears, the tube feels warm, and the gas burns with a squeaky pop.
    • Copper(II) oxide disappears and the solution turns blue, with no bubbles at any stage.
    • The marble chips fizz and shrink, and the limewater turns milky.
  • Conclusion: the metal gives hydrogen, the base gives no gas, and the carbonate gives carbon dioxide, while every reaction forms a salt.
  • Safety: wear eye protection, treat dilute acid as an irritant to skin and eyes, keep the splint flame away from the acid bottle, and never point a heated tube at anyone.

Acids and indicators

Definition

Indicator

A substance that shows one colour in an acidic solution and a different colour in an alkaline solution.

  1. An indicator is a dye that has one colour in an acid and a different colour in an alkali.
  2. Litmus is used as paper, while methyl orange and thymolphthalein are added as a few drops of solution.
  3. Litmus
    1. An acid turns blue litmus paper red.
    2. Red litmus paper stays red in an acid, so only blue litmus shows a change.
  4. Methyl orange
    1. Methyl orange is red in an acidic solution.
    2. A few drops added to an acid turn the whole solution red.
  5. Thymolphthalein
    1. Thymolphthalein is colourless in an acidic solution.
    2. A colourless result does not prove that a solution is acidic, because thymolphthalein is also colourless in a neutral solution.
Common Mistake
  • Do not describe acidic litmus as "pink", because the correct colour is red.
  • Do not mix up the gases, because metals give hydrogen and carbonates give carbon dioxide.
  • Do not leave water out of the products when an acid reacts with a base or a carbonate.
Exam technique

Describing observations

  • Write what you would see, such as fizzing or bubbles, rather than naming the gas, when a question asks for observations.
  • Say that a solid disappears or gets smaller, and give a colour change with both the starting and final colours.
  • Check the acid before naming a salt, so hydrochloric acid gives a chloride, sulfuric acid a sulfate and nitric acid a nitrate.
  • Give the indicator colour in the acid itself, such as "methyl orange turns red", not just "it changes colour".
Self review
  • Which two products form when a metal reacts with a dilute acid?
  • Which three products form when a carbonate reacts with a dilute acid?
  • Name the salt formed when zinc reacts with sulfuric acid.
  • What do you see when black copper(II) oxide is warmed with dilute sulfuric acid?
  • What colours are blue litmus, methyl orange and thymolphthalein in an acidic solution?

7.1.2 Bases, alkalis and their properties

Bases and alkalis

Definition

Base

A metal oxide or metal hydroxide that reacts with an acid to form a salt and water.

Definition

Alkali

A base that dissolves in water.

  1. A base is an oxide or hydroxide of a metal.
  2. Metal oxides such as copper(II) oxide, CuO\text{CuO}CuO, magnesium oxide, MgO\text{MgO}MgO, and calcium oxide, CaO\text{CaO}CaO, are bases.
  3. Metal hydroxides such as sodium hydroxide, NaOH\text{NaOH}NaOH, potassium hydroxide, KOH\text{KOH}KOH, and calcium hydroxide, Ca(OH)2\text{Ca(OH)}_2Ca(OH)2​, are also bases.
  4. Most bases are insoluble in water, so they stay as a solid when water is added.
  5. A base that does dissolve in water is called an alkali, and its solution is described as alkaline.
  6. Sodium hydroxide and potassium hydroxide dissolve readily, so they are alkalis.
  7. Calcium hydroxide dissolves only slightly, and its solution in water is known as limewater.
  8. Copper(II) oxide and magnesium oxide do not dissolve, so they are bases but not alkalis.
  9. Every alkali is therefore a base, but most bases are not alkalis.
Example

Sorting bases and alkalis

  • Copper(II) oxide is a metal oxide, so it is a base, and it is insoluble, so it is not an alkali.
  • Potassium hydroxide is a metal hydroxide, so it is a base, and it dissolves in water, so it is also an alkali.
  • Carbon dioxide is the oxide of a non-metal, so it is not a base at all.

Bases and acids

  1. A base reacts with an acid to form a salt and water.

    base+acid→salt+water \text{base} + \text{acid} \rightarrow \text{salt} + \text{water} base+acid→salt+water
  2. The metal in the base becomes the first part of the salt's name, while the acid decides the second part.

  3. An insoluble base such as copper(II) oxide reacts as a solid, so you see the solid disappear and the solution change colour.

  4. An alkali such as sodium hydroxide reacts in solution, and the mixture warms up because the reaction gives out thermal energy.

  5. Adding enough base uses up all of the acid, so the mixture stops behaving as an acid.

  6. This type of reaction between an acid and a base is called a neutralisation reaction.

Example

Three bases reacting with acids

  • Magnesium oxide and hydrochloric acid give magnesium chloride and water.
MgO(s)+2HCl(aq)→MgCl2(aq)+H2O(l) \text{MgO(s)} + 2\text{HCl(aq)} \rightarrow \text{MgCl}_2\text{(aq)} + \text{H}_2\text{O(l)} MgO(s)+2HCl(aq)→MgCl2​(aq)+H2​O(l)
  • Potassium hydroxide and nitric acid give potassium nitrate and water.
KOH(aq)+HNO3(aq)→KNO3(aq)+H2O(l) \text{KOH(aq)} + \text{HNO}_3\text{(aq)} \rightarrow \text{KNO}_3\text{(aq)} + \text{H}_2\text{O(l)} KOH(aq)+HNO3​(aq)→KNO3​(aq)+H2​O(l)
  • Calcium hydroxide and sulfuric acid give calcium sulfate and water, and two water molecules are needed to balance the two hydroxide groups.
Ca(OH)2(aq)+H2SO4(aq)→CaSO4(s)+2H2O(l) \text{Ca(OH)}_2\text{(aq)} + \text{H}_2\text{SO}_4\text{(aq)} \rightarrow \text{CaSO}_4\text{(s)} + 2\text{H}_2\text{O(l)} Ca(OH)2​(aq)+H2​SO4​(aq)→CaSO4​(s)+2H2​O(l)

Bases and ammonium salts

Definition

Ammonium salt

A salt in which the positive ion is the ammonium ion, NH4+\text{NH}_4^{+}NH4+​, instead of a metal ion.

  1. An ammonium salt contains the ammonium ion, NH4+\text{NH}_4^{+}NH4+​, in place of a metal ion.

  2. Common examples are ammonium chloride, NH4Cl\text{NH}_4\text{Cl}NH4​Cl, ammonium sulfate, (NH4)2SO4(\text{NH}_4)_2\text{SO}_4(NH4​)2​SO4​, and ammonium nitrate, NH4NO3\text{NH}_4\text{NO}_3NH4​NO3​.

  3. When an ammonium salt is warmed with a base, the products are a salt, ammonia and water.

    ammonium salt+base→salt+ammonia+water \text{ammonium salt} + \text{base} \rightarrow \text{salt} + \text{ammonia} + \text{water} ammonium salt+base→salt+ammonia+water
  4. Ammonia, NH3\text{NH}_3NH3​, is a colourless gas with a sharp, choking smell.

  5. Ammonia is very soluble in water, so warming is needed to drive the gas out of the mixture.

  6. Ammonia is an alkaline gas, so it turns damp red litmus paper blue.

  7. The litmus paper must be damp, because ammonia has to dissolve in water before it can act as an alkali.

  8. This reaction explains why farmers do not spread lime, which contains calcium hydroxide, at the same time as an ammonium fertiliser, because the nitrogen would be lost as ammonia gas.

Example

Ammonium salts warmed with bases

  • Ammonium chloride and sodium hydroxide give sodium chloride, ammonia and water.
NH4Cl(s)+NaOH(aq)→NaCl(aq)+NH3(g)+H2O(l) \text{NH}_4\text{Cl(s)} + \text{NaOH(aq)} \rightarrow \text{NaCl(aq)} + \text{NH}_3\text{(g)} + \text{H}_2\text{O(l)} NH4​Cl(s)+NaOH(aq)→NaCl(aq)+NH3​(g)+H2​O(l)
  • Ammonium sulfate and calcium hydroxide give calcium sulfate, ammonia and water.
(NH4)2SO4(s)+Ca(OH)2(s)→CaSO4(s)+2NH3(g)+2H2O(l) (\text{NH}_4)_2\text{SO}_4\text{(s)} + \text{Ca(OH)}_2\text{(s)} \rightarrow \text{CaSO}_4\text{(s)} + 2\text{NH}_3\text{(g)} + 2\text{H}_2\text{O(l)} (NH4​)2​SO4​(s)+Ca(OH)2​(s)→CaSO4​(s)+2NH3​(g)+2H2​O(l)
  • The ammonium salt has two NH4+\text{NH}_4^{+}NH4+​ ions, so two NH3\text{NH}_3NH3​ molecules and two water molecules form.
Practical

Warming an ammonium salt with an alkali

  • Aim: to show that ammonia gas is given off when an ammonium salt is warmed with an alkali.
  • Apparatus: test tube, test-tube holder, spatula, ammonium chloride, dilute sodium hydroxide solution, 10 cm310\ \text{cm}^310 cm3 measuring cylinder, red litmus paper, wash bottle of distilled water, Bunsen burner, heat-resistant mat and eye protection.
  • Method:
    • Place one small spatula measure of ammonium chloride in a dry test tube.
    • Add 2 cm32\ \text{cm}^32 cm3 of dilute sodium hydroxide solution.
    • Wet a strip of red litmus paper with a few drops of distilled water.
    • Hold the tube in a test-tube holder at an angle, with the mouth pointing away from everyone, and warm it gently in a small Bunsen flame.
    • Hold the damp litmus paper just above the mouth of the tube without touching the glass, because alkali on the rim would turn it blue even without any gas.
  • Results: the damp red litmus paper turns blue and a sharp smell may be noticed near the tube.
  • Conclusion: ammonia gas is released, which shows that a base reacts with an ammonium salt on warming.
  • Safety: wear eye protection, warm the mixture gently so it does not spit, work in a well-ventilated room, and do not sniff the gas directly from the tube.

Alkalis and indicators

  1. Alkalis change indicator colours in the opposite direction to acids.
  2. Litmus
    1. An alkali turns red litmus paper blue.
    2. Blue litmus paper stays blue in an alkali.
  3. Methyl orange
    1. Methyl orange is yellow in an alkaline solution.
    2. A few drops added to an alkali turn the whole solution yellow.
  4. Thymolphthalein
    1. Thymolphthalein is blue in an alkaline solution.
    2. It is colourless in acidic and neutral solutions, so a blue colour is a clear sign that the solution is alkaline.
  5. An insoluble base such as copper(II) oxide does not change the colour of an indicator, because it does not dissolve to form an alkaline solution.
Common Mistake
  • Do not call every base an alkali, because only bases that dissolve in water are alkalis.
  • Do not say that the gas from an ammonium salt and a base is hydrogen, because the gas is ammonia.
  • Do not test for ammonia with dry litmus paper, because the gas must dissolve in water on the paper first.
Exam technique

Answering indicator questions

  • Give the final colour of the indicator, such as "thymolphthalein turns blue", not just "it changes colour".
  • For litmus, state both colours, such as "red litmus turns blue".
  • Remember that methyl orange is yellow in an alkali, not orange.
Self review
  • What is the difference between a base and an alkali?
  • Name one base that is not an alkali.
  • What are the products when an ammonium salt is warmed with a base?
  • Why must litmus paper be damp when testing for ammonia?
  • What colours are red litmus, methyl orange and thymolphthalein in an alkaline solution?

7.1.3 Acidity, pH and neutralisation

Ions in acids and alkalis

Definition

Aqueous solution

A solution in which water is the solvent.

  1. When an acid dissolves in water, it forms an aqueous solution that contains hydrogen ions, H+(aq)\text{H}^{+}\text{(aq)}H+(aq).
  2. All acids produce hydrogen ions in water, which is why different acids share the same reactions with metals, bases and carbonates.
  3. Each acid also releases a negative ion, so hydrochloric acid gives Cl−\text{Cl}^{-}Cl−, sulfuric acid gives SO42−\text{SO}_4^{2-}SO42−​ and nitric acid gives NO3−\text{NO}_3^{-}NO3−​.
  4. When an alkali dissolves in water, its aqueous solution contains hydroxide ions, OH−(aq)\text{OH}^{-}\text{(aq)}OH−(aq).
  5. Sodium hydroxide solution, for example, contains Na+\text{Na}^{+}Na+ ions and OH−\text{OH}^{-}OH− ions.
  6. The other ions, such as Cl−\text{Cl}^{-}Cl− and Na+\text{Na}^{+}Na+, do not make a solution acidic or alkaline.
  7. In pure water the tiny numbers of H+\text{H}^{+}H+ and OH−\text{OH}^{-}OH− ions are equal, so water is neutral.
  8. An acidic solution has more H+\text{H}^{+}H+ ions than OH−\text{OH}^{-}OH− ions, while an alkaline solution has more OH−\text{OH}^{-}OH− ions than H+\text{H}^{+}H+ ions.
  9. The state symbol (aq) shows that an ion or substance is dissolved in water.

The pH scale

Definition

pH scale

A numbered scale, usually running from 0 to 14, that shows how acidic or alkaline an aqueous solution is.

Definition

Neutral solution

An aqueous solution that is neither acidic nor alkaline and has a pH of 7.

  1. The pH scale usually runs from 0 to 14 and measures how acidic or alkaline an aqueous solution is.
  2. A solution with a pH below 7 is acidic.
  3. A solution with a pH of exactly 7 is neutral.
  4. A solution with a pH above 7 is alkaline.
  5. The lower the pH, the higher the hydrogen ion concentration, so the more acidic the solution.
  6. The higher the pH, the lower the hydrogen ion concentration, so the more alkaline the solution.
  7. A solution at pH 1 is therefore more acidic than one at pH 4, and a solution at pH 13 is more alkaline than one at pH 9.

Universal indicator

Definition

Universal indicator

A mixture of indicators that shows a different colour at each pH, so the colour can be matched to a pH value.

  1. Universal indicator is a mixture of several indicators, so it shows a whole range of colours instead of just two.
  2. Each colour matches a range of pH values on a printed colour chart.
    1. pH 0 to 2: red, showing a strongly acidic solution.
    2. pH 3 to 6: orange to yellow, showing a slightly acidic solution.
    3. pH 7: green, showing a neutral solution.
    4. pH 8 to 10: blue, showing a slightly alkaline solution.
    5. pH 11 to 14: dark blue to purple, showing a strongly alkaline solution.
  3. Universal indicator is often used as paper, and a drop of the solution is touched onto the paper with a glass rod.
  4. Litmus, methyl orange and thymolphthalein only show whether a solution is acidic or alkaline.
  5. Universal indicator also shows how acidic or alkaline a solution is, so it can be used to compare the acidity of two solutions.
Example

Ranking everyday solutions by pH

  • Lemon juice turns universal indicator paper red at about pH 2, so it has a high hydrogen ion concentration and is strongly acidic.
  • Vinegar turns the paper orange at about pH 3, so it is acidic but less so than lemon juice.
  • Pure water turns the paper green at pH 7, so it is neutral.
  • Seawater turns the paper green-blue at about pH 8, so it is slightly alkaline.
  • Oven cleaner turns the paper purple at about pH 13, so it is strongly alkaline.
  • The order from most acidic to most alkaline is lemon juice, vinegar, water, seawater, oven cleaner.
Practical

Measuring pH with universal indicator paper

  • Aim: to measure and compare the pH of several aqueous solutions using universal indicator paper.
  • Apparatus: white tile, universal indicator paper cut into small squares, glass rod, beaker of distilled water, paper towel, pH colour chart, small labelled samples of dilute hydrochloric acid, vinegar, distilled water, sodium chloride solution and dilute sodium hydroxide solution, and eye protection.
  • Method:
    • Lay one square of universal indicator paper on the white tile for each solution, because the white background makes the colour easier to judge.
    • Dip a clean glass rod into the first solution and touch it onto its square of paper, instead of dipping the paper into the sample, so the sample is not contaminated with dye.
    • Compare the colour with the chart within a few seconds, before the paper dries and the colour changes.
    • Record the colour and the pH in a table with the column headings "solution", "colour" and "pH".
    • Rinse the rod in distilled water and wipe it dry before testing the next solution, so no solution is carried over into the next sample.
  • Results: hydrochloric acid gives red at about pH 1, vinegar gives orange at about pH 3, distilled water and sodium chloride solution give green at pH 7, and sodium hydroxide gives purple at about pH 13.
  • Conclusion: the solutions are ranked from most acidic to most alkaline by placing their pH values in order.
  • Limitations: the paper gives only whole-number pH values, and judging the colour by eye is less precise than reading a digital pH meter.
  • Safety: wear eye protection, wash any splash off the skin with plenty of water, and take extra care with sodium hydroxide, which damages the eyes even when dilute.

Neutralisation

Definition

Neutralisation

The reaction in which hydrogen ions from an acid combine with hydroxide ions from an alkali to form water.

  1. When an acid reacts with an alkali, the H+\text{H}^{+}H+ ions from the acid react with the OH−\text{OH}^{-}OH− ions from the alkali.

  2. Each H+\text{H}^{+}H+ ion combines with one OH−\text{OH}^{-}OH− ion to form one molecule of water.

  3. The ionic equation for neutralisation is shown below.

    H+(aq)+OH−(aq)→H2O(l) \text{H}^{+}\text{(aq)} + \text{OH}^{-}\text{(aq)} \rightarrow \text{H}_2\text{O(l)} H+(aq)+OH−(aq)→H2​O(l)
  4. The equation is the same for every reaction between an acid and an alkali, because the other ions take no part in the reaction.

  5. These other ions stay dissolved in the solution and make up the salt.

  6. As alkali is added to an acid, H+\text{H}^{+}H+ ions are removed, so the pH rises towards 7.

  7. When exactly enough alkali has been added, all the H+\text{H}^{+}H+ ions have reacted and the solution is neutral at pH 7.

  8. Adding more alkali after this point leaves extra OH−\text{OH}^{-}OH− ions, so the pH rises above 7.

  9. Neutralisation gives out thermal energy, so the temperature of the mixture rises.

Example

Following the ions in a neutralisation

  • Hydrochloric acid reacts with sodium hydroxide solution to form sodium chloride and water.
HCl(aq)+NaOH(aq)→NaCl(aq)+H2O(l) \text{HCl(aq)} + \text{NaOH(aq)} \rightarrow \text{NaCl(aq)} + \text{H}_2\text{O(l)} HCl(aq)+NaOH(aq)→NaCl(aq)+H2​O(l)
  • The acid supplies H+\text{H}^{+}H+ and Cl−\text{Cl}^{-}Cl− ions, and the alkali supplies Na+\text{Na}^{+}Na+ and OH−\text{OH}^{-}OH− ions.
  • The H+\text{H}^{+}H+ and OH−\text{OH}^{-}OH− ions join to make water.
  • The Na+\text{Na}^{+}Na+ and Cl−\text{Cl}^{-}Cl− ions are left unchanged in the solution as dissolved sodium chloride.
H+(aq)+OH−(aq)→H2O(l) \text{H}^{+}\text{(aq)} + \text{OH}^{-}\text{(aq)} \rightarrow \text{H}_2\text{O(l)} H+(aq)+OH−(aq)→H2​O(l)
Common Mistake
  • Do not write the ions as H and OH, because the charges must always be shown, as in H+\text{H}^{+}H+ and OH−\text{OH}^{-}OH−.
  • Do not say that a neutral solution contains no ions, because the ions of the salt are still dissolved in it.
  • Do not think that a higher pH means a stronger acid, because a lower pH means a higher hydrogen ion concentration.
Exam technique

Comparing acidity with pH

  • Link pH to hydrogen ion concentration in the same sentence, such as "lower pH, so a higher concentration of H+\text{H}^{+}H+ ions".
  • Name universal indicator when asked how to compare acidity, because litmus cannot show a pH value.
  • Give both the colour and the pH when a question asks what you would observe.
  • Include state symbols in the ionic equation for neutralisation when they are asked for.
Self review
  • Which ion is present in every aqueous solution of an acid?
  • Which ion is present in every aqueous solution of an alkali?
  • What colour does universal indicator turn in a neutral solution, and what is its pH?
  • Which has the higher hydrogen ion concentration, a solution at pH 2 or one at pH 5?
  • Write the ionic equation for the neutralisation of an acid by an alkali.

7.1.4 Proton donors and acceptors; strong and weak acids

Proton donors and acceptors

Definition

Proton donor

A substance that gives a hydrogen ion, H+\text{H}^{+}H+, to another substance in a reaction.

Definition

Proton acceptor

A substance that takes a hydrogen ion, H+\text{H}^{+}H+, from another substance in a reaction.

  1. A hydrogen atom is made of one proton and one electron, so a hydrogen ion, H+\text{H}^{+}H+, is simply a proton.

  2. This allows acids and bases to be described by what happens to protons during a reaction.

  3. An acid is a proton donor, because it gives H+\text{H}^{+}H+ ions to another substance.

  4. A base is a proton acceptor, because it takes H+\text{H}^{+}H+ ions from another substance.

  5. Every reaction between an acid and a base is therefore a proton transfer from the acid to the base.

  6. When hydrogen chloride dissolves in water, it donates its protons, which is why the solution contains H+\text{H}^{+}H+ ions.

  7. In neutralisation, the hydroxide ion is the base, because it accepts a proton to form water.

    H+(aq)+OH−(aq)→H2O(l) \text{H}^{+}\text{(aq)} + \text{OH}^{-}\text{(aq)} \rightarrow \text{H}_2\text{O(l)} H+(aq)+OH−(aq)→H2​O(l)
  8. The oxide ion in a metal oxide also accepts protons, which is why metal oxides act as bases.

    O2−+2H+→H2O \text{O}^{2-} + 2\text{H}^{+} \rightarrow \text{H}_2\text{O} O2−+2H+→H2​O
  9. Ammonia is a base because it accepts a proton to form the ammonium ion.

    NH3+H+→NH4+ \text{NH}_3 + \text{H}^{+} \rightarrow \text{NH}_4^{+} NH3​+H+→NH4+​
Example

Ammonia and hydrogen chloride

  • Hydrogen chloride gas and ammonia gas react to form white solid ammonium chloride.
HCl(g)+NH3(g)→NH4Cl(s) \text{HCl(g)} + \text{NH}_3\text{(g)} \rightarrow \text{NH}_4\text{Cl(s)} HCl(g)+NH3​(g)→NH4​Cl(s)
  • Hydrogen chloride loses a proton and becomes a chloride ion, Cl−\text{Cl}^{-}Cl−, so it is the proton donor and acts as the acid.
  • Ammonia gains that proton and becomes an ammonium ion, NH4+\text{NH}_4^{+}NH4+​, so it is the proton acceptor and acts as the base.
  • No water is involved, which shows that the proton transfer idea describes acid and base behaviour even outside aqueous solution.

Strong and weak acids

Definition

Dissociation

The splitting of a compound into separate ions when it is in aqueous solution.

Definition

Strong acid

An acid that fully dissociates into ions when it is in aqueous solution.

Definition

Weak acid

An acid that only partly dissociates into ions when it is in aqueous solution.

  1. When an acid dissolves in water, its molecules split up, or dissociate, to release H+\text{H}^{+}H+ ions.
  2. The strength of an acid describes how completely it dissociates in aqueous solution.
  3. In a strong acid, every molecule dissociates, so the solution contains ions and no undissociated acid molecules.
  4. In a weak acid, only a small fraction of the molecules dissociate, so most of the acid stays as whole molecules.
  5. Hydrochloric acid, sulfuric acid and nitric acid are strong acids, while ethanoic acid is a weak acid.
  6. Hydrochloric acid
    1. Hydrochloric acid is a strong acid, as its dissociation equation shows.

      HCl(aq)→H+(aq)+Cl−(aq) \text{HCl(aq)} \rightarrow \text{H}^{+}\text{(aq)} + \text{Cl}^{-}\text{(aq)} HCl(aq)→H+(aq)+Cl−(aq)
    2. The single arrow shows that the dissociation goes to completion, leaving no HCl\text{HCl}HCl molecules.

  7. Ethanoic acid
    1. Ethanoic acid is a weak acid, as its dissociation equation shows.

      CH3COOH(aq)⇌H+(aq)+CH3COO−(aq) \text{CH}_3\text{COOH(aq)} \rightleftharpoons \text{H}^{+}\text{(aq)} + \text{CH}_3\text{COO}^{-}\text{(aq)} CH3​COOH(aq)⇌H+(aq)+CH3​COO−(aq)
    2. The reversible arrow shows that the ions join back together as fast as molecules split, so most of the acid stays as CH3COOH\text{CH}_3\text{COOH}CH3​COOH molecules.

    3. Only the hydrogen atom in the −COOH-\text{COOH}−COOH group is released as H+\text{H}^{+}H+, while the three hydrogen atoms in the CH3\text{CH}_3CH3​ group stay attached.

Strength and concentration

  1. Concentration is the amount of acid dissolved in each dm3\text{dm}^3dm3 of solution.
  2. A concentrated acid has a large amount of acid in each dm3\text{dm}^3dm3, while a dilute acid has a small amount.
  3. Strength and concentration are separate ideas, so an acid can be dilute and strong, or concentrated and weak.
  4. When a strong acid and a weak acid have the same concentration, the strong acid releases far more H+\text{H}^{+}H+ ions.
  5. The strong acid therefore has the lower pH, so 0.1 mol/dm30.1\ \text{mol/dm}^30.1 mol/dm3 hydrochloric acid is about pH 1 while 0.1 mol/dm30.1\ \text{mol/dm}^30.1 mol/dm3 ethanoic acid is about pH 3.
  6. The strong acid also reacts faster with magnesium or a carbonate, because more H+\text{H}^{+}H+ ions are available to collide with the solid each second.
  7. Equal volumes of the two acids at the same concentration still neutralise the same amount of alkali, because more ethanoic acid molecules dissociate as their H+\text{H}^{+}H+ ions are used up.
Practical

Comparing hydrochloric acid and ethanoic acid

  • Aim: to compare a strong acid and a weak acid of the same concentration using their pH values and their reactions with magnesium.
  • Apparatus: 1.0 mol/dm31.0\ \text{mol/dm}^31.0 mol/dm3 hydrochloric acid, 1.0 mol/dm31.0\ \text{mol/dm}^31.0 mol/dm3 ethanoic acid, two boiling tubes in a rack, 10 cm310\ \text{cm}^310 cm3 measuring cylinder, universal indicator paper, glass rod, white tile, two 3 cm3\ \text{cm}3 cm strips of magnesium ribbon cut from the same roll, stop-watch and eye protection.
  • Method:
    • Measure 10 cm310\ \text{cm}^310 cm3 of each acid into a separate boiling tube.
    • Touch a drop of each acid onto universal indicator paper on the white tile with a clean glass rod, and record each pH.
    • Drop one strip of magnesium into each tube at the same moment and start the stop-watch.
    • Compare the rate of bubbling, and record the time taken for each strip to disappear completely.
    • Keep the concentration, volume, temperature and length of magnesium the same, so that the strength of the acid is the only variable that changes.
  • Results: hydrochloric acid turns the paper red at about pH 0 to 1 while ethanoic acid turns it orange at about pH 2 to 3, and the magnesium fizzes vigorously and disappears much sooner in the hydrochloric acid.
  • Conclusion: both acids contain the same amount of acid, but hydrochloric acid is fully dissociated, so it has a higher concentration of H+\text{H}^{+}H+ ions at any moment.
  • Safety: wear eye protection, treat both acids as irritants, and keep the tubes away from flames because the hydrogen produced is flammable.
Common Mistake
  • Do not use "strong" to mean "concentrated", or "weak" to mean "dilute", because strength is about dissociation and concentration is about the amount dissolved.
  • Do not say that a weak acid does not dissociate, because it dissociates partially.
  • Do not write a single arrow for the dissociation of ethanoic acid, because partial dissociation needs the reversible arrow.
Exam technique

Explaining acid strength

  • Define strength with the word dissociates together with completely or partially, and include "in aqueous solution".
  • When comparing the pH of a strong and a weak acid, state that the two acids have the same concentration.
  • Link each difference in pH or rate of reaction back to the concentration of H+\text{H}^{+}H+ ions.
  • Identify the proton donor and proton acceptor in a reaction by following which particle loses H+\text{H}^{+}H+ and which gains it.
Self review
  • What is an acid in terms of protons?
  • What is a base in terms of protons?
  • What is the difference between a strong acid and a weak acid?
  • Write the equation that shows ethanoic acid is a weak acid.
  • Why does 0.1 mol/dm30.1\ \text{mol/dm}^30.1 mol/dm3 hydrochloric acid have a lower pH than 0.1 mol/dm30.1\ \text{mol/dm}^30.1 mol/dm3 ethanoic acid?

How was this guide?

Teach Genie

Review 7.1 The characteristic properties of acids and bases by teaching Genie

Teach it back in your own words, spot gaps, and remember it better.

Start teaching
Genie and Baby Genie

Lesson

Recap your knowledge with an interactive lesson

7 minute activity

Start lesson

To understand how acids and bases react, we first need to look at what they are made of at the ionic level. An acid is a proton donor.

In chemical reactions, a "proton" refers to a hydrogen ion, H+H^+H+. When an acid dissolves in water, it donates or releases these H+H^+H+ ions into the aqueous solution.

A base is a proton acceptor. Chemically, bases are usually the oxides or hydroxides of metals, such as copper(II) oxide or sodium hydroxide.

Many bases do not dissolve in water. However, a base that does dissolve in water is called an alkali. When an alkali dissolves, it releases hydroxide ions, OH−(aq)OH^-(aq)OH−(aq).

Flashcards

Remember key concepts with flashcards

22 flashcards

Practice flashcards

An acid is a [     ]; a base is a [     ].

7.1 The characteristic properties of acids and bases Revision Guide

  1. IGCSE
  2. /Chemistry
  3. /7.1 The characteristic properties of acids and bases

Revision notes for CIE IGCSE Chemistry 7.1 The characteristic properties of acids and bases: explanations and worked examples on 7.1.1 Properties of acids and their effect on indicators, 7.1.2 Bases, alkalis and their properties, 7.1.3 Acidity, pH and neutralisation, and 7.1.4 Proton donors and acceptors; strong and weak acids.

More revision guides