11.3.1 Fossil fuels and hydrocarbons
Fossil fuels
Fossil fuel
A fuel such as coal, natural gas or petroleum that formed over millions of years from the remains of dead organisms.
- The three fossil fuels are coal, natural gas and petroleum.
- They formed over millions of years from the remains of plants and animals that were buried and then squeezed and heated deep underground.
- Each fossil fuel exists in a different state at room temperature.
- Coal is a black solid that formed mainly from the remains of ancient land plants.
- Petroleum, also called crude oil, is a thick, dark liquid that formed mainly from the remains of tiny sea organisms.
- Natural gas is a colourless gas that is often found trapped in porous rock above petroleum deposits.
- Fossil fuels are burned to release thermal energy, which is used for heating, cooking, transport and generating electricity.
- Fossil fuels are non-renewable, because they take millions of years to form and are being used up far faster than they are replaced.
- Petroleum is also the main source of the raw materials used to make plastics, solvents and many other chemicals.
Hydrocarbons
Hydrocarbon
A compound that contains hydrogen and carbon only.
- A hydrocarbon is a compound that contains hydrogen and carbon only.
- The atoms in a hydrocarbon molecule are held together by covalent bonds.
- The word only is the key part of the definition, so a compound that contains any other element is not a hydrocarbon.
- Methane, CH4\text{CH}_4CH4, ethane, C2H6\text{C}_2\text{H}_6C2H6, and ethene, C2H4\text{C}_2\text{H}_4C2H4, are all hydrocarbons.
- Ethanol, C2H5OH\text{C}_2\text{H}_5\text{OH}C2H5OH, is not a hydrocarbon, because it also contains oxygen.
- Chloromethane, CH3Cl\text{CH}_3\text{Cl}CH3Cl, is not a hydrocarbon, because it also contains chlorine.
- A hydrocarbon is a compound, so do not call it a mixture or an element.
- Most of the substances in petroleum and natural gas are hydrocarbons, which is why fossil fuels are the main source of hydrocarbons.
Deciding whether a substance is a hydrocarbon
- Read the formula and list every element symbol that appears in it.
- Propane, C3H8\text{C}_3\text{H}_8C3H8, contains only C and H, so it is a hydrocarbon.
- Ethanoic acid, CH3COOH\text{CH}_3\text{COOH}CH3COOH, contains O as well as C and H, so it is not a hydrocarbon.
- Carbon dioxide, CO2\text{CO}_2CO2, contains no hydrogen at all, so it is not a hydrocarbon either.
- Octane, C8H18\text{C}_8\text{H}_{18}C8H18, contains only carbon and hydrogen, so it is a hydrocarbon however long its chain is.
Natural gas and methane
-
Methane is the main constituent of natural gas, which means it is the substance present in the greatest amount.
-
Natural gas is mostly methane, with smaller amounts of other hydrocarbons such as ethane and propane.
-
Methane has the formula CH4\text{CH}_4CH4, with one carbon atom joined to four hydrogen atoms by single covalent bonds.
H∣H−C−H∣H \begin{array}{ccccc} & & \text{H} & & \\ & & | & & \\ \text{H} & - & \text{C} & - & \text{H} \\ & & | & & \\ & & \text{H} & & \end{array} H−H∣C∣H−H -
Methane is the simplest hydrocarbon, because it has only one carbon atom.
-
Natural gas is piped to homes and power stations, where the methane is burned for heating, cooking and generating electricity.
Petroleum
Petroleum
A liquid fossil fuel, also called crude oil, that is a mixture of many different hydrocarbons.
- Petroleum is a mixture of hydrocarbons.
- In a mixture the substances are not chemically joined, so each hydrocarbon in petroleum keeps its own properties.
- The hydrocarbon molecules in petroleum range from very small molecules with one carbon atom to very large molecules with more than 50 carbon atoms.
- Most of these hydrocarbons are alkanes, which are carbon chains of different lengths.
- Because the hydrocarbons have different chain lengths, they have different boiling points.
- Petroleum is not useful straight from the ground, because each use needs hydrocarbons with particular properties, such as a runny liquid that ignites easily for car engines.
- The different boiling points allow petroleum to be separated into useful parts, as you will see with fractional distillation.
- Do not say that petroleum is a hydrocarbon, because it is a mixture of many hydrocarbons.
- Do not leave out the word only when you define a hydrocarbon, because "contains hydrogen and carbon" also describes ethanol and glucose.
- Do not name ethane or propane as the main constituent of natural gas, because it is methane.
Wording answers on fuels
- Name all three fossil fuels when asked, using coal, natural gas and petroleum, and spell petroleum correctly.
- Define a hydrocarbon as a compound containing hydrogen and carbon only, because both "compound" and "only" carry the mark.
- Describe petroleum as a mixture of hydrocarbons, not a compound or a single substance.
- Check every symbol in a formula before you call it a hydrocarbon, because one O or Cl atom rules it out.
- Name the three fossil fuels.
- What is the main constituent of natural gas, and what is its formula?
- Define the term hydrocarbon.
- Is ethanol, C2H5OH\text{C}_2\text{H}_5\text{OH}C2H5OH, a hydrocarbon, and why?
- Describe the composition of petroleum.
11.3.2 Fractional distillation of petroleum and uses of fractions
Fractional distillation
Fractional distillation
A method of separating a mixture of liquids by vaporising it and condensing the parts at different temperatures according to their boiling points.
Fraction
A mixture of hydrocarbons with similar chain lengths and boiling points that is collected at one height of a fractionating column.
- Petroleum is separated into useful parts called fractions by fractional distillation.
- The separation works because the hydrocarbons in petroleum have different boiling points.
- The petroleum is heated in a furnace to about 400 ∘C400\ ^\circ\text{C}400 ∘C, so that most of it boils and turns into vapour.
- The hot vapour is passed into the bottom of a tall fractionating column.
- The column has a temperature gradient, so it is hottest at the bottom and coolest at the top.
- The vapours rise up the column through holes in a series of horizontal trays, and they cool as they rise.
- Each hydrocarbon condenses to a liquid when it reaches a height where the temperature is below its boiling point.
- Hydrocarbons with high boiling points condense low down in the column, where it is still hot.
- Hydrocarbons with low boiling points stay as vapour for longer and condense higher up, where it is cooler.
- The liquid that collects on the trays at each height is piped off as a separate fraction.
- The hydrocarbons with the lowest boiling points never condense, so they leave the top of the column as refinery gas.
- The largest molecules do not boil at all, so they collect at the bottom of the column as a thick residue called bitumen.
- Each fraction is still a mixture of hydrocarbons, but the hydrocarbons in it have similar chain lengths and similar boiling points.
- Fractional distillation is a physical process, because the molecules are separated without any of their bonds being broken.
Trends up the column
Volatility
How easily a liquid evaporates to form a vapour.
Viscosity
The resistance of a liquid to flowing, so a more viscous liquid is thicker and flows more slowly.
- The properties of the fractions change in a regular way from the bottom to the top of the column.
- Chain length
- The hydrocarbon chains get shorter towards the top, so the molecules are smaller.
- Boiling point
- The boiling points get lower towards the top.
- Smaller molecules have weaker intermolecular forces, so less energy is needed to separate them and the boiling point is lower.
- Volatility
- The fractions become more volatile towards the top, so they evaporate more easily.
- A fraction with a low boiling point turns into a vapour easily, which is why the most volatile fractions are collected highest up.
- Viscosity
- The fractions become less viscous towards the top, so they are runnier and flow more easily.
- Long chains tangle together and attract each other more strongly, which is why the fractions near the bottom are thick and sticky.
- All four trends come from the same cause, which is the decrease in chain length from the bottom to the top of the column.
Comparing petrol and bitumen
- The petrol fraction is collected near the top, and its molecules typically contain about 5–10 carbon atoms.
- The bitumen fraction is collected at the bottom, and its molecules typically contain more than 50 carbon atoms.
- Petrol has the shorter chains, so it has the lower boiling point, the higher volatility and the lower viscosity.
- These properties explain the uses, because a runny, volatile liquid turns into vapour easily in a car engine while a thick, sticky solid binds stones together on a road.
Uses of the fractions
- The eight fractions are listed below in order from the top of the column to the bottom.
- Refinery gas
- Refinery gas is used as gas for heating and cooking, often sold as bottled gas.
- Gasoline, also called petrol
- Gasoline is used as fuel for cars.
- Naphtha
- Naphtha is used as a chemical feedstock, which is the raw material for making other chemicals such as plastics.
- Kerosene, also called paraffin
- Kerosene is used as jet fuel for aircraft.
- Diesel oil, also called gas oil
- Diesel oil is used as fuel for diesel engines, such as those in lorries, buses and trains.
- Fuel oil
- Fuel oil is used as fuel for ships and for home heating systems.
- Lubricating oil
- Lubricating oil is used to make lubricants, waxes and polishes.
- Bitumen
- Bitumen is used for making roads, because it is a thick, black material that holds the road surface together.
Fractional distillation of synthetic crude oil
- Aim: to separate a sample of crude oil substitute into fractions and compare how runny and how flammable each fraction is.
- Apparatus: boiling tube with a side arm, −10-10−10 to 400 ∘C400\ ^\circ\text{C}400 ∘C thermometer in a bung, ceramic wool, synthetic crude oil, four small test tubes, beaker of cold water, test-tube rack, Bunsen burner, clamp stand, watch glasses, wooden splints, heat-resistant mat and eye protection.
- Method:
- Soak a plug of ceramic wool with about 2 cm32\ \text{cm}^32 cm3 of synthetic crude oil and push it to the bottom of the side-arm boiling tube.
- Fit the thermometer so that its bulb sits level with the side arm, because that is where the vapour leaves the tube.
- Clamp the tube and place the end of the side arm inside a small test tube standing in a beaker of cold water.
- Heat the bottom of the boiling tube gently and collect the liquid that condenses up to 100 ∘C100\ ^\circ\text{C}100 ∘C as the first fraction.
- Swap to a clean test tube each time the thermometer reaches 150 ∘C150\ ^\circ\text{C}150 ∘C, 200 ∘C200\ ^\circ\text{C}200 ∘C and 250 ∘C250\ ^\circ\text{C}250 ∘C, so you collect four fractions.
- Pour a few drops of each fraction onto a separate watch glass, tilt it to judge the runniness, and touch it with a lighted splint.
- Results:
- The first fraction is pale yellow, very runny, catches fire at once and burns with a clean yellow flame.
- Each later fraction is darker, thicker, harder to light and burns with a smokier flame.
- A dark, sticky residue is left in the ceramic wool at the end.
- Conclusion: fractions that boil at lower temperatures have shorter chains, so they are less viscous, more volatile and more flammable, which matches the trend up a real fractionating column.
- Safety: wear eye protection, use synthetic crude oil because real crude oil contains toxic compounds, work in a well-ventilated room or fume cupboard, keep the collected fractions away from the flame, and lift the side arm out of the collecting tube before you stop heating.
- Do not reverse the trends, because chain length, boiling point and viscosity decrease up the column while volatility increases.
- Do not say that the column separates single pure compounds, because each fraction is a mixture of hydrocarbons with similar boiling points.
- Do not say that the hydrocarbons are separated by their melting points or their density, because they are separated by their boiling points.
Describing fractional distillation
- Mention the temperature gradient, saying that the column is hotter at the bottom and cooler at the top.
- State that the fractions condense at different heights because they have different boiling points.
- Give each use in the exact form, such as fuel for cars for gasoline and jet fuel for kerosene, because "fuel" on its own is too vague.
- Call naphtha a chemical feedstock, not a fuel.
- When asked about a trend, name the direction and the property, such as "volatility increases from the bottom to the top".
- Why can petroleum be separated by fractional distillation?
- Where in the column is the temperature highest?
- How do chain length, boiling point, volatility and viscosity change from the bottom to the top of the column?
- Which fraction is used as a chemical feedstock?
- State the uses of the kerosene, fuel oil and bitumen fractions.