Skip to content

Course home

Revision guides·9.6 Extraction of metals
Sign up

9.6 Extraction of metals

9.6.1 Extraction of iron and aluminium

Ores and the reactivity series

Definition

Ore

A rock that contains a metal or a metal compound in a large enough amount to make extracting the metal worthwhile.

  1. Most metals are found in the Earth's crust combined with other elements, often as metal oxides, in rocks called ores.
  2. Extracting a metal means separating it from its compound, which usually means removing oxygen from a metal oxide.
  3. How easy this is depends on the position of the metal in the reactivity series.
    1. Gold, at the bottom of the series, is so unreactive that it is found as the uncombined metal and only has to be separated from the surrounding rock.
    2. Metals below carbon, such as zinc, iron and copper, are extracted by heating their oxides with carbon, because carbon is more reactive and removes the oxygen.
    3. Metals above carbon, such as potassium, sodium, calcium, magnesium and aluminium, form compounds that carbon cannot break down, so they are extracted by electrolysis.
  4. The more reactive a metal is, the more strongly it holds on to the other elements in its compounds, so the harder and more expensive it is to extract.
  5. This is why gold and copper have been used for thousands of years, iron for about three thousand years, and aluminium only since the late 1800s, when electrolysis became possible on a large scale.
Practical

Extracting copper by heating with carbon

  • Aim: to extract copper from copper(II) oxide by heating it with carbon, showing that carbon can remove oxygen from the oxide of a metal below it in the reactivity series.
  • Apparatus: a hard-glass test tube, a bung fitted with a delivery tube, a second test tube containing limewater, a spatula, copper(II) oxide powder, powdered charcoal, a clamp and stand, a Bunsen burner, a heat-resistant mat and a beaker of cold water.
  • Method, setting up:
    • Mix one spatula of black copper(II) oxide with two spatulas of powdered charcoal on a sheet of paper, so that the carbon is in excess.
    • Tip the mixture into the hard-glass tube and clamp the tube near its mouth.
    • Fit the bung and arrange the delivery tube so that its end dips into the limewater.
  • Method, heating:
    • Heat the mixture strongly with a roaring Bunsen flame for about five minutes.
    • Watch the limewater as gas bubbles through it.
    • Lift the delivery tube out of the limewater before you stop heating, so that cold limewater cannot be sucked back into the hot tube.
    • Let the tube cool, then tip its contents into the beaker of cold water and swirl, so that the light charcoal floats away and the dense copper sinks to the bottom.
  • Results: the black mixture glows, pink-brown specks of copper are left in the tube, and the limewater turns milky, showing that carbon dioxide has formed.
  • Reaction: 2CuO(s)+C(s)→2Cu(s)+CO2(g)\mathrm{2CuO(s) + C(s) \rightarrow 2Cu(s) + CO_2(g)}2CuO(s)+C(s)→2Cu(s)+CO2​(g)
  • Watch out: if magnesium oxide is heated with carbon in the same way, no magnesium forms, because magnesium is above carbon in the reactivity series.
  • Safety: wear eye protection, remove the delivery tube from the limewater before you stop heating to prevent suck-back, and let the hard-glass tube cool completely before you touch it.

Raw materials for the blast furnace

Definition

Hematite

The main ore of iron, which contains iron(III) oxide.

  1. Iron is extracted from hematite, which is mainly iron(III) oxide, in a tall steel tower lined with heat-resistant bricks called a blast furnace.
  2. Three solid raw materials are added at the top of the furnace, and hot air is blasted in near the bottom.
  3. Hematite
    1. Hematite supplies the iron(III) oxide that is turned into iron.
  4. Coke
    1. Coke is almost pure carbon, made by heating coal.
    2. It is the fuel that heats the furnace and the source of the carbon monoxide that removes oxygen from the ore.
  5. Limestone
    1. Limestone is mainly calcium carbonate.
    2. It removes the sandy impurities in the ore, which are mostly silicon(IV) oxide, by turning them into slag.
  6. Hot air
    1. Hot air supplies the oxygen that the coke needs to burn.

Reactions in the blast furnace

Definition

Reduction (in terms of oxygen)

The loss of oxygen by a substance.

Definition

Slag

The molten waste, mainly calcium silicate, formed in the blast furnace when calcium oxide reacts with silicon(IV) oxide impurities in the ore.

  1. The reactions happen in a sequence as the solids move down the furnace and the hot gases rise up through them.
  2. Burning the coke
    1. Carbon in the coke burns in the hot air to produce carbon dioxide: carbon+oxygen→carbon dioxide\text{carbon} + \text{oxygen} \rightarrow \text{carbon dioxide}carbon+oxygen→carbon dioxide.
    2. This reaction is strongly exothermic, so it heats the bottom of the furnace to well over 1500 ∘C1500\ ^\circ\text{C}1500 ∘C.
  3. Making carbon monoxide
    1. The carbon dioxide rises and reacts with more hot coke to form carbon monoxide: carbon dioxide+carbon→carbon monoxide\text{carbon dioxide} + \text{carbon} \rightarrow \text{carbon monoxide}carbon dioxide+carbon→carbon monoxide.
    2. Carbon dioxide loses oxygen in this reaction, so it is reduced to carbon monoxide.
  4. Reducing the iron(III) oxide
    1. Carbon monoxide removes the oxygen from the iron(III) oxide to leave iron: iron(III) oxide+carbon monoxide→iron+carbon dioxide\text{iron(III) oxide} + \text{carbon monoxide} \rightarrow \text{iron} + \text{carbon dioxide}iron(III) oxide+carbon monoxide→iron+carbon dioxide.
    2. The iron(III) oxide is reduced, and carbon monoxide is the substance that reduces it.
    3. The furnace is so hot that the iron forms as a liquid, which trickles down and collects at the bottom.
  5. Decomposing the limestone
    1. The heat causes the thermal decomposition of calcium carbonate into calcium oxide and carbon dioxide: calcium carbonate→calcium oxide+carbon dioxide\text{calcium carbonate} \rightarrow \text{calcium oxide} + \text{carbon dioxide}calcium carbonate→calcium oxide+carbon dioxide.
  6. Forming the slag
    1. Calcium oxide reacts with the silicon(IV) oxide impurities to form slag, which is calcium silicate: calcium oxide+silicon(IV) oxide→calcium silicate\text{calcium oxide} + \text{silicon(IV) oxide} \rightarrow \text{calcium silicate}calcium oxide+silicon(IV) oxide→calcium silicate.
    2. Molten slag is less dense than molten iron, so it floats on top of the iron and the two liquids are tapped off separately.
    3. The solid slag is used in road building and for making cement.
  7. Waste gases, mainly nitrogen and carbon dioxide, leave through the top of the furnace.
Example

Following one lump of ore through the furnace

  • A lump of hematite enters at the top of the furnace with coke and limestone.
  • As it sinks, it meets hot carbon monoxide rising from the burning coke below.
  • The carbon monoxide removes oxygen from the iron(III) oxide and leaves as carbon dioxide.
  • The iron left behind melts, runs to the bottom of the furnace and is tapped off.
  • The sandy impurities in the lump are removed by calcium oxide and leave the furnace as slag.

Extracting aluminium

Definition

Bauxite

The main ore of aluminium, which contains aluminium oxide.

Definition

Electrolysis

The breaking down of an ionic compound, when molten or in aqueous solution, by passing an electric current through it.

  1. The main ore of aluminium is bauxite, which contains aluminium oxide.
  2. Aluminium is above carbon in the reactivity series, so heating aluminium oxide with carbon does not produce aluminium.
  3. Aluminium is therefore extracted by electrolysis, in which a very large electric current breaks down the aluminium oxide.
  4. Electrolysis uses a huge amount of electrical energy, so aluminium plants are often built near cheap sources of electricity such as hydroelectric power stations.
  5. Iron is below carbon, so it can be extracted much more cheaply by heating with carbon in the blast furnace.
Exam technique

Answering extraction questions

  • Give the job of each raw material, not just its name, so write that coke is a fuel and makes carbon monoxide, and that limestone removes impurities as slag.
  • Name carbon monoxide as the substance that reduces iron(III) oxide.
  • When asked why aluminium is not extracted with carbon, state that aluminium is more reactive than carbon.
  • Use the word reduced for a substance that loses oxygen.
Common Mistake
  • Do not say that iron is reduced, because it is the iron(III) oxide that is reduced to iron.
  • Do not say that limestone reacts with the impurities directly, because it first decomposes into calcium oxide, which forms the slag.
  • Do not confuse the ores, because hematite is the ore of iron and bauxite is the ore of aluminium.
Self review
  • Why are metals high in the reactivity series harder to extract?
  • Name the three solid raw materials added to the blast furnace.
  • Which substance reduces iron(III) oxide in the blast furnace?
  • What is the job of limestone in the blast furnace?
  • What is the main ore of aluminium, and how is aluminium extracted?

9.6.2 Blast furnace equations and aluminium extraction

Blast furnace equations

  1. Each stage in the extraction of iron from hematite can be written as a balanced symbol equation.
  2. Burning the coke
    1. Carbon burns in the hot air to form carbon dioxide and release heat: C(s)+O2(g)→CO2(g)\mathrm{C(s) + O_2(g) \rightarrow CO_2(g)}C(s)+O2​(g)→CO2​(g).
  3. Making carbon monoxide
    1. Carbon dioxide reacts with more hot carbon to form carbon monoxide: C(s)+CO2(g)→2CO(g)\mathrm{C(s) + CO_2(g) \rightarrow 2CO(g)}C(s)+CO2​(g)→2CO(g).
  4. Reducing the iron(III) oxide
    1. Carbon monoxide removes oxygen from iron(III) oxide to leave molten iron: Fe2O3(s)+3CO(g)→2Fe(l)+3CO2(g)\mathrm{Fe_2O_3(s) + 3CO(g) \rightarrow 2Fe(l) + 3CO_2(g)}Fe2​O3​(s)+3CO(g)→2Fe(l)+3CO2​(g).
    2. Each formula unit of iron(III) oxide loses three oxygen atoms, and each carbon monoxide molecule gains one, so three molecules of carbon monoxide are needed.
  5. Decomposing the limestone
    1. Calcium carbonate breaks down on heating: CaCO3(s)→CaO(s)+CO2(g)\mathrm{CaCO_3(s) \rightarrow CaO(s) + CO_2(g)}CaCO3​(s)→CaO(s)+CO2​(g).
  6. Forming the slag
    1. Calcium oxide reacts with silicon(IV) oxide to form calcium silicate: CaO(s)+SiO2(s)→CaSiO3(l)\mathrm{CaO(s) + SiO_2(s) \rightarrow CaSiO_3(l)}CaO(s)+SiO2​(s)→CaSiO3​(l).
    2. Calcium oxide is a basic oxide and silicon(IV) oxide is an acidic oxide, so this reaction is a neutralisation.

Redox in the blast furnace

Definition

Reducing agent

A substance that reduces another substance and is itself oxidised.

  1. In the main reaction, iron(III) oxide loses oxygen, so it is reduced, while carbon monoxide gains oxygen, so it is oxidised.
  2. Carbon monoxide is therefore the reducing agent for iron(III) oxide.
  3. The oxidation numbers confirm this, because iron falls from +3+3+3 in Fe2O3\mathrm{Fe_2O_3}Fe2​O3​ to 000 in Fe\mathrm{Fe}Fe, while carbon rises from +2+2+2 in CO\mathrm{CO}CO to +4+4+4 in CO2\mathrm{CO_2}CO2​.
  4. In the reaction C+CO2→2CO\mathrm{C + CO_2 \rightarrow 2CO}C+CO2​→2CO, carbon is the reducing agent, because it removes oxygen from carbon dioxide and is itself oxidised.
Example

Checking that the main equation balances

  • The equation to check is the reduction of iron(III) oxide by carbon monoxide.
Fe2O3+3CO→2Fe+3CO2 \mathrm{Fe_2O_3 + 3CO \rightarrow 2Fe + 3CO_2} Fe2​O3​+3CO→2Fe+3CO2​
  • On the left there are 222 iron atoms, 333 carbon atoms, and 3+3=63 + 3 = 63+3=6 oxygen atoms.
  • On the right there are 222 iron atoms in 2Fe\mathrm{2Fe}2Fe, and 333 carbon atoms and 666 oxygen atoms in 3CO2\mathrm{3CO_2}3CO2​.
  • Every element has the same number of atoms on both sides, so the equation is balanced.

Electrolysis of aluminium oxide

Definition

Cryolite

An ionic compound of sodium, aluminium and fluorine that is melted and used as the solvent for aluminium oxide in the extraction of aluminium by electrolysis.

  1. Bauxite is first purified to give aluminium oxide, Al2O3\mathrm{Al_2O_3}Al2​O3​, which is used as the electrolyte.
  2. Aluminium oxide is an ionic compound made of Al3+\mathrm{Al^{3+}}Al3+ and O2−\mathrm{O^{2-}}O2− ions, and these ions must be free to move for electrolysis to work.
  3. Pure aluminium oxide has a melting point of over 2000 ∘C2000\ ^\circ\text{C}2000 ∘C, so melting it would need an enormous amount of energy.
  4. Instead, the aluminium oxide is dissolved in molten cryolite.
  5. The role of cryolite is to lower the operating temperature to about 950 ∘C950\ ^\circ\text{C}950 ∘C, which saves a large amount of energy and money.
  6. The molten mixture also conducts electricity better than molten aluminium oxide on its own.
  7. The cell is a steel tank lined with carbon, which acts as the cathode, while large blocks of carbon dip into the molten mixture as the anodes.
  8. Molten aluminium is denser than the electrolyte, so it collects at the bottom of the cell and is siphoned off at intervals.

Reactions at the electrodes

Definition

Reduction

The gain of electrons by a substance.

Definition

Oxidation

The loss of electrons by a substance.

  1. At the cathode
    1. Positive aluminium ions are attracted to the negative cathode, where each ion gains three electrons to form an aluminium atom: Al3+(l)+3e−→Al(l)\mathrm{Al^{3+}(l) + 3e^- \rightarrow Al(l)}Al3+(l)+3e−→Al(l).
    2. Gaining electrons is reduction, so the aluminium ions are reduced.
  2. At the anode
    1. Negative oxide ions are attracted to the positive anode, where they lose electrons to form oxygen gas: 2O2−(l)→O2(g)+4e−\mathrm{2O^{2-}(l) \rightarrow O_2(g) + 4e^-}2O2−(l)→O2​(g)+4e−.
    2. Losing electrons is oxidation, so the oxide ions are oxidised.
  3. The overall equation for the electrolysis is 2Al2O3(l)→4Al(l)+3O2(g)\mathrm{2Al_2O_3(l) \rightarrow 4Al(l) + 3O_2(g)}2Al2​O3​(l)→4Al(l)+3O2​(g).
Example

Combining the two half-equations

  • The cathode half-equation uses 333 electrons and the anode half-equation releases 444, so both are multiplied to involve 121212 electrons.
4Al3++12e−→4Al \mathrm{4Al^{3+} + 12e^- \rightarrow 4Al} 4Al3++12e−→4Al 6O2−→3O2+12e− \mathrm{6O^{2-} \rightarrow 3O_2 + 12e^-} 6O2−→3O2​+12e−
  • Adding the two half-equations and cancelling the 121212 electrons on each side gives the ionic equation for the whole cell.
4Al3++6O2−→4Al+3O2 \mathrm{4Al^{3+} + 6O^{2-} \rightarrow 4Al + 3O_2} 4Al3++6O2−→4Al+3O2​
  • Grouping the ions back into aluminium oxide gives the overall equation 2Al2O3→4Al+3O2\mathrm{2Al_2O_3 \rightarrow 4Al + 3O_2}2Al2​O3​→4Al+3O2​.

Replacing the carbon anodes

  1. The oxygen produced at the anodes forms at about 950 ∘C950\ ^\circ\text{C}950 ∘C, right next to hot carbon.
  2. The oxygen reacts with the carbon of the anodes to form carbon dioxide: C(s)+O2(g)→CO2(g)\mathrm{C(s) + O_2(g) \rightarrow CO_2(g)}C(s)+O2​(g)→CO2​(g).
  3. The anodes are gradually burned away, so they become smaller and must be replaced regularly.
  4. The carbon lining of the cathode is not used up, because aluminium forms there and no oxygen is produced at it.
  5. Replacing the anodes adds to the cost of the process, and the carbon dioxide released adds to the greenhouse gases in the atmosphere.
Exam technique

Answering aluminium extraction questions

  • For the role of cryolite, state that it lowers the operating temperature and so saves energy, or that it improves the electrical conductivity of the electrolyte.
  • For the anodes, give both steps: oxygen forms at the anode, and the oxygen reacts with the carbon to make carbon dioxide.
  • Balance each half-equation for charge as well as atoms, so 2O2−\mathrm{2O^{2-}}2O2− carries four negative charges and releases four electrons.
  • Name the products at each electrode clearly: aluminium at the cathode and oxygen at the anode.
Common Mistake
  • Do not call cryolite a catalyst, because it acts as a solvent that lowers the operating temperature.
  • Do not write the anode product as single oxygen atoms, because oxygen forms as O2\mathrm{O_2}O2​ molecules.
  • Do not say that the anodes are used up by the electric current, because they are used up by reacting with oxygen.
Self review
  • Write the symbol equation for the reduction of iron(III) oxide by carbon monoxide.
  • Write the symbol equation for the formation of slag.
  • Why is aluminium oxide dissolved in molten cryolite?
  • Write the half-equation for the reaction at the cathode.
  • Why must the carbon anodes be replaced regularly?

How was this guide?

Teach Genie

Review 9.6 Extraction of metals by teaching Genie

Teach it back in your own words, spot gaps, and remember it better.

Start teaching
Genie and Baby Genie

Lesson

Recap your knowledge with an interactive lesson

8 minute activity

Start lesson

Most metals are not found as pure elements because they have reacted with oxygen or other elements in the Earth's crust. An ore is a rock that contains enough metal or metal compound to make extraction worthwhile.

The key idea is the metal's position in the reactivity series relative to carbon. Metals below carbon can usually be extracted by reduction with carbon, while metals above carbon need electrolysis.

Very unreactive metals such as gold and platinum are often found native. They can be obtained by mining and physical separation rather than a major chemical extraction process.

Flashcards

Remember key concepts with flashcards

30 flashcards

Practice flashcards

A rock counts as an ore if it contains [     ] to make extraction [     ].

9.6 Extraction of metals Revision Guide

  1. IGCSE
  2. /Chemistry
  3. /9.6 Extraction of metals

Revision notes for CIE IGCSE Chemistry 9.6 Extraction of metals: explanations and worked examples on 9.6.1 Extraction of iron and aluminium and 9.6.2 Blast furnace equations and aluminium extraction.

More revision guides