Skip to content

Course home

Revision guides·5.1 Exothermic and endothermic reactions
Sign up

5.1 Exothermic and endothermic reactions

5.1.1 Exothermic and endothermic reactions

Exothermic and endothermic reactions

Definition

Exothermic reaction

A reaction that transfers thermal energy to the surroundings, so the temperature of the surroundings increases.

Definition

Endothermic reaction

A reaction that takes in thermal energy from the surroundings, so the temperature of the surroundings decreases.

  1. Every chemical reaction involves a transfer of thermal energy between the reacting chemicals and their surroundings.
  2. The surroundings are everything outside the reacting particles, including the water the chemicals are dissolved in, the container, the thermometer and the air around them.
  3. In an exothermic reaction, thermal energy is transferred from the reacting chemicals to the surroundings.
    1. The surroundings gain thermal energy, so the temperature of the surroundings increases.
    2. A thermometer in the reaction mixture shows a rise in temperature, and the container feels warm to the touch.
  4. In an endothermic reaction, the reacting chemicals take in thermal energy from the surroundings.
    1. The surroundings lose thermal energy, so the temperature of the surroundings decreases.
    2. A thermometer in the reaction mixture shows a fall in temperature, and the container feels cold to the touch.
  5. The thermometer measures the temperature of the surroundings, so a rising reading means that energy has left the reacting chemicals, and a falling reading means that energy has entered them.
  6. Energy is conserved in every reaction, so the thermal energy gained by the surroundings is exactly equal to the energy lost by the reacting chemicals, and the other way round.

Diagram comparing the direction of thermal energy transfer in an exothermic reaction, where energy passes out to the surroundings, and an endothermic reaction, where energy passes in from the surroundings.

Common examples

  1. Exothermic reactions
    1. The combustion of fuels, such as methane burning in a gas cooker, transfers large amounts of thermal energy to the surroundings.
    2. Neutralisation of an acid by an alkali, such as dilute hydrochloric acid with aqueous sodium hydroxide, warms the solution.
    3. The reaction of a metal with a dilute acid, such as magnesium ribbon with dilute hydrochloric acid, makes the test tube feel warm.
    4. Displacement reactions of metals, such as zinc powder added to aqueous copper(II) sulfate, raise the temperature of the solution.
    5. The oxidation of iron powder inside a disposable hand warmer releases thermal energy slowly for several hours.
  2. Endothermic reactions and processes
    1. Thermal decomposition, such as heating calcium carbonate to make calcium oxide and carbon dioxide, only continues while thermal energy is supplied by a Bunsen burner or furnace.
    2. The reaction of citric acid with sodium hydrogencarbonate makes the mixture noticeably colder, which is why sherbet feels cool on the tongue.
    3. Dissolving ammonium nitrate in water takes in thermal energy, and instant cold packs for sports injuries use this process to cool down within seconds.
Example

Classifying reactions from temperature readings

  • Magnesium ribbon was added to dilute hydrochloric acid in a polystyrene cup, and the temperature of the acid rose from 19.5 ∘C19.5\,^\circ\text{C}19.5∘C to 31.0 ∘C31.0\,^\circ\text{C}31.0∘C.
temperature change=31.0−19.5=+11.5 ∘C \text{temperature change} = 31.0 - 19.5 = +11.5\,^\circ\text{C} temperature change=31.0−19.5=+11.5∘C
  • The temperature of the surroundings increased, so thermal energy was transferred to the surroundings and the reaction is exothermic.
  • Sodium hydrogencarbonate was added to citric acid solution in a second cup, and the temperature fell from 20.0 ∘C20.0\,^\circ\text{C}20.0∘C to 14.5 ∘C14.5\,^\circ\text{C}14.5∘C.
temperature change=14.5−20.0=−5.5 ∘C \text{temperature change} = 14.5 - 20.0 = -5.5\,^\circ\text{C} temperature change=14.5−20.0=−5.5∘C
  • The temperature of the surroundings decreased, so thermal energy was taken in from the surroundings and the reaction is endothermic.
Practical

Measuring temperature changes during reactions

  • Aim: to measure the temperature change when pairs of reactants are mixed, and to use it to decide whether each reaction is exothermic or endothermic.
  • Apparatus: a polystyrene cup with a lid, a 250 cm3250\ \text{cm}^3250 cm3 beaker to support the cup, a thermometer reading to 0.5 ∘C0.5\,^\circ\text{C}0.5∘C or a digital temperature probe, a 25 cm325\ \text{cm}^325 cm3 measuring cylinder, a balance, a spatula, dilute hydrochloric acid, aqueous sodium hydroxide, magnesium ribbon, citric acid solution, sodium hydrogencarbonate powder and eye protection.
  • Variables: the pair of reactants is the independent variable, the temperature change is the dependent variable, and the volume of solution, the mass of solid and the type of cup are kept the same.
  • Method:
    • Stand the polystyrene cup inside the beaker so that it cannot tip over, because polystyrene is a good thermal insulator and keeps the energy change inside the mixture.
    • Measure 25 cm325\ \text{cm}^325 cm3 of the first solution, such as dilute hydrochloric acid, with the measuring cylinder and pour it into the cup.
    • Place the thermometer in the solution, wait until the reading stops changing, and record it as the initial temperature.
    • Add the second reactant, either 25 cm325\ \text{cm}^325 cm3 of aqueous sodium hydroxide or a weighed mass of solid, and fit the lid straight away with the thermometer passing through the hole.
    • Stir the mixture gently and continuously so that the temperature is the same throughout the liquid.
    • Watch the reading closely and record the highest temperature reached for a reaction that warms up, or the lowest temperature reached for a reaction that cools down.
    • Rinse and dry the cup, then repeat the method with each pair of reactants, using the same volumes and masses every time.
  • Results: record the readings in a table with the headings initial temperature / ∘C^\circ\text{C}∘C, highest or lowest temperature / ∘C^\circ\text{C}∘C and temperature change / ∘C^\circ\text{C}∘C, giving every reading to the nearest 0.5 ∘C0.5\,^\circ\text{C}0.5∘C.
  • Conclusion: a positive temperature change shows that the reaction transferred thermal energy to the surroundings and is exothermic, while a negative temperature change shows that it took in thermal energy and is endothermic.
  • Watch out: thermal energy passes between the mixture and the air during the experiment, so the measured change is smaller than the true change, and the lid and the insulated cup reduce this error.
  • Safety: wear eye protection because dilute acids and alkalis irritate the eyes, and wipe up spills straight away.

Reaction pathway diagrams

Definition

Reaction pathway diagram

A diagram that shows the energy levels of the reactants and products and how the energy changes as a reaction progresses.

  1. A reaction pathway diagram compares the energy stored in the reactants with the energy stored in the products.
  2. The vertical axis is labelled energy and the horizontal axis shows the progress of the reaction.
  3. The reactants are drawn as a horizontal line on the left, and the products are drawn as a horizontal line on the right.
  4. Between the two levels, the pathway line usually rises to a peak and then falls to the products.
  5. The vertical gap between the reactant level and the product level shows how much energy is transferred between the chemicals and the surroundings.
  6. This gap is often marked with a vertical arrow labelled energy given out or energy taken in.

Interpreting the diagrams

  1. Exothermic reaction
    1. The products are at a lower energy level than the reactants.
    2. The energy difference has been transferred to the surroundings, so the temperature of the surroundings increases.
    3. An arrow from the reactant level to the product level points downwards.
  2. Endothermic reaction
    1. The products are at a higher energy level than the reactants.
    2. The extra energy stored in the products has been taken in from the surroundings, so the temperature of the surroundings decreases.
    3. An arrow from the reactant level to the product level points upwards.
  3. The larger the vertical gap between the two levels, the more thermal energy is transferred and the bigger the temperature change of the surroundings.

Reaction pathway diagrams for an exothermic reaction, with the products below the reactants, and an endothermic reaction, with the products above the reactants.

Common Mistake
  • Do not decide the type of reaction from the peak, because the pathway rises before it falls for both exothermic and endothermic reactions.
  • Compare only the starting level of the reactants with the final level of the products.
  • Do not say that an endothermic reaction gives out cold, because it takes in thermal energy and the surroundings cool down as a result.
Exam technique

Describing energy changes

  • When you describe an exothermic reaction, give both parts of the answer: thermal energy is transferred to the surroundings and the temperature of the surroundings increases.
  • For an endothermic reaction, the matching pair is that thermal energy is taken in from the surroundings and the temperature of the surroundings decreases.
  • Write thermal energy or heat rather than just energy, and always say which way it moves.
  • When you interpret a pathway diagram, back up the reaction type with a comparison, such as the products have less energy than the reactants.
  • When a question gives temperature readings, quote the rise or fall in your answer, because the numbers are the evidence for your conclusion.
Self review
  • State what happens to thermal energy and to the temperature of the surroundings during an exothermic reaction.
  • State what happens to thermal energy and to the temperature of the surroundings during an endothermic reaction.
  • Name two exothermic reactions and one endothermic reaction.
  • Explain why a polystyrene cup with a lid is used when measuring the temperature change of a reaction.
  • A reaction pathway diagram shows the products above the reactants, so state the type of reaction and what happens to the temperature of the surroundings.

5.1.2 Enthalpy change and activation energy

Enthalpy change

Definition

Enthalpy change

The transfer of thermal energy during a reaction, given the symbol ΔH\Delta HΔH and measured in kJ/mol\text{kJ/mol}kJ/mol.

  1. The transfer of thermal energy between a reaction and its surroundings is called the enthalpy change of the reaction, and it is given the symbol ΔH\Delta HΔH.
  2. ΔH\Delta HΔH is usually measured in kilojoules per mole, kJ/mol\text{kJ/mol}kJ/mol, for the amounts of substance shown in the balanced equation.
  3. The sign of ΔH\Delta HΔH shows the direction of the energy transfer, judged from the point of view of the reacting chemicals, not the surroundings.
  4. Exothermic reactions
    1. The chemicals lose thermal energy to the surroundings, so the energy stored in the chemicals goes down.
    2. ΔH\Delta HΔH is negative, such as ΔH=−890 kJ/mol\Delta H = -890\ \text{kJ/mol}ΔH=−890 kJ/mol for the combustion of methane.
  5. Endothermic reactions
    1. The chemicals gain thermal energy from the surroundings, so the energy stored in the chemicals goes up.
    2. ΔH\Delta HΔH is positive, such as ΔH=+178 kJ/mol\Delta H = +178\ \text{kJ/mol}ΔH=+178 kJ/mol for the thermal decomposition of calcium carbonate.
  6. A value of ΔH\Delta HΔH written beside an equation applies to the whole equation as written, as in CH4(g)+2O2(g)→CO2(g)+2H2O(l)\text{CH}_4(\text{g}) + 2\text{O}_2(\text{g}) \rightarrow \text{CO}_2(\text{g}) + 2\text{H}_2\text{O}(\text{l})CH4​(g)+2O2​(g)→CO2​(g)+2H2​O(l), ΔH=−890 kJ/mol\Delta H = -890\ \text{kJ/mol}ΔH=−890 kJ/mol.
  7. The size of ΔH\Delta HΔH tells you how much energy is transferred, and the sign tells you which way it goes.

Activation energy

Definition

Activation energy

The minimum energy that colliding particles must have to react, given the symbol EaE_aEa​.

  1. Particles have to collide with each other before they can react.
  2. Not every collision leads to a reaction, because the colliding particles need a minimum amount of energy for a reaction to take place.
  3. This minimum energy is called the activation energy, and it is given the symbol EaE_aEa​.
  4. A collision between particles with energy less than EaE_aEa​ does not produce a reaction, and the particles move apart unchanged.
  5. A collision between particles with energy equal to or greater than EaE_aEa​ can lead to a reaction.
  6. Every reaction has an activation energy, including exothermic reactions, which is why the methane from a gas tap does not burn until a spark or a lit match supplies the energy to start it.
  7. Once an exothermic reaction has started, the energy it releases gives other particles enough energy to react, so the reaction keeps going without further heating.
  8. An endothermic reaction, such as the thermal decomposition of calcium carbonate, needs a continuous supply of energy, so it stops as soon as the heating stops.
  9. On a reaction pathway diagram, EaE_aEa​ is the energy difference between the reactants and the peak of the pathway.

Drawing reaction pathway diagrams

  1. Draw a vertical axis labelled energy and a horizontal axis labelled progress of reaction.
  2. Draw a short horizontal line on the left for the reactants, and label it with the word reactants or with their formulae.
  3. Draw a second horizontal line on the right for the products, placed below the reactants for an exothermic reaction and above them for an endothermic reaction.
  4. Join the two lines with a smooth curve that rises to a single peak above both levels and then falls to the products.
  5. Draw a vertical arrow from the reactant line up to the top of the peak and label it EaE_aEa​.
  6. Draw a vertical arrow from the reactant line to the product line and label it ΔH\Delta HΔH.
    1. For an exothermic reaction this arrow points downwards, showing that ΔH\Delta HΔH is negative.
    2. For an endothermic reaction this arrow points upwards, showing that ΔH\Delta HΔH is positive.
  7. Use any values given in the question to set the heights, so that a large ΔH\Delta HΔH appears as a large gap and a small EaE_aEa​ appears as a low peak.
  8. In an endothermic reaction the peak must sit above the products, so EaE_aEa​ is always larger than ΔH\Delta HΔH.

Reaction pathway diagrams for an exothermic and an endothermic reaction, with the activation energy measured from the reactants up to the peak and the enthalpy change measured from the reactants to the products.

Example

Pathway for an exothermic reaction

  • A reaction has ΔH=−120 kJ/mol\Delta H = -120\ \text{kJ/mol}ΔH=−120 kJ/mol and Ea=+50 kJ/molE_a = +50\ \text{kJ/mol}Ea​=+50 kJ/mol.
  • The negative sign shows that the reaction is exothermic, so the product line is drawn below the reactant line.
  • The gap between the reactant line and the product line represents 120 kJ/mol120\ \text{kJ/mol}120 kJ/mol.
  • The peak is drawn 50 kJ/mol50\ \text{kJ/mol}50 kJ/mol above the reactant line, which makes the rise to the peak much smaller than the fall to the products.
  • The EaE_aEa​ arrow points upwards from the reactant line to the peak, and the ΔH\Delta HΔH arrow points downwards from the reactant line to the product line.
Example

Pathway for an endothermic reaction

  • A reaction has ΔH=+60 kJ/mol\Delta H = +60\ \text{kJ/mol}ΔH=+60 kJ/mol and Ea=+150 kJ/molE_a = +150\ \text{kJ/mol}Ea​=+150 kJ/mol.
  • The positive sign shows that the reaction is endothermic, so the product line is drawn 60 kJ/mol60\ \text{kJ/mol}60 kJ/mol above the reactant line.
  • The peak is drawn 150 kJ/mol150\ \text{kJ/mol}150 kJ/mol above the reactant line, so it sits above the products by the difference between the two values.
150−60=90 kJ/mol 150 - 60 = 90\ \text{kJ/mol} 150−60=90 kJ/mol
  • Both arrows start at the reactant line and point upwards, with the ΔH\Delta HΔH arrow ending at the product line and the EaE_aEa​ arrow ending at the peak.
Common Mistake
  • Do not draw EaE_aEa​ from the products to the peak, because activation energy is always measured from the reactants.
  • Do not draw ΔH\Delta HΔH from the peak, because it is the difference between the reactants and the products only.
  • Always include the sign of ΔH\Delta HΔH, and remember that an exothermic value is negative even though the surroundings get hotter, because ΔH\Delta HΔH describes the energy of the chemicals.
Exam technique

Drawing and labelling pathway diagrams

  • Marks for these diagrams are usually given separately for the reactant and product levels in the correct positions, for the ΔH\Delta HΔH arrow and for the EaE_aEa​ arrow, so check each part on its own.
  • Put an arrowhead on every arrow and make sure each arrow touches the lines it joins, because an arrow that stops short or starts at the wrong line is not credited.
  • Label both levels with the words reactants and products or with their formulae, since an unlabelled line cannot earn its mark.
  • When you define activation energy, include the words minimum energy and colliding particles, because a definition that misses either one is incomplete.
  • When asked for the sign of ΔH\Delta HΔH, link it to the diagram, such as ΔH\Delta HΔH is negative because the products are at a lower energy level than the reactants.
Self review
  • State the name and the symbol given to the transfer of thermal energy during a reaction.
  • State the sign of ΔH\Delta HΔH for an exothermic reaction and for an endothermic reaction.
  • Define activation energy.
  • Explain why methane does not burn until a flame or spark is applied.
  • Describe where the EaE_aEa​ arrow and the ΔH\Delta HΔH arrow are drawn on a reaction pathway diagram.

5.1.3 Bond breaking, bond making and bond energies

Bond breaking and bond making

Definition

Bond breaking

An endothermic process in which energy is taken in to overcome the attraction between two bonded atoms and separate them.

Definition

Bond making

An exothermic process in which energy is released as two atoms are joined by a new bond.

  1. During a chemical reaction, the bonds in the reactant particles break, the atoms rearrange, and new bonds form to make the products.
  2. In a covalent bond, the two atoms are held together by the strong attraction between their nuclei and the shared pair of electrons.
  3. Bond breaking is an endothermic process, because energy must be taken in to overcome this attraction and pull the atoms apart.
  4. Bond making is an exothermic process, because energy is released when two atoms are drawn together and a new bond forms.
  5. Forming a particular bond releases exactly the same amount of energy as is needed to break that same bond.
  6. Every reaction involves both processes, so the overall energy change depends on which of the two involves more energy.

Explaining the enthalpy change

  1. Exothermic reactions
    1. The energy released when bonds form in the products is greater than the energy taken in to break the bonds in the reactants.
    2. The extra energy is transferred to the surroundings, so ΔH\Delta HΔH is negative.
    3. Burning a fuel is exothermic because the bonds formed in carbon dioxide and water are very strong, so making them releases more energy than breaking the bonds in the fuel and oxygen takes in.
  2. Endothermic reactions
    1. The energy taken in to break the bonds in the reactants is greater than the energy released when bonds form in the products.
    2. The shortfall is taken in from the surroundings, so ΔH\Delta HΔH is positive.
  3. The enthalpy change is therefore the balance between two energy transfers, one into the chemicals and one out of them.

Calculating enthalpy change from bond energies

Definition

Bond energy

The energy needed to break one mole of a particular covalent bond, measured in kJ/mol\text{kJ/mol}kJ/mol.

  1. A bond energy is the energy needed to break one mole of a particular covalent bond, and the same amount is released when one mole of that bond forms.
  2. Bond energies are given in kJ/mol\text{kJ/mol}kJ/mol and are always listed as positive values, because breaking a bond always takes energy in.
  3. Stronger bonds have larger bond energies, so a triple bond such as N≡N\text{N}\equiv\text{N}N≡N at 945 kJ/mol945\ \text{kJ/mol}945 kJ/mol is much stronger than a single bond such as H-H\text{H-H}H-H at 436 kJ/mol436\ \text{kJ/mol}436 kJ/mol.
  4. The enthalpy change of a reaction is calculated with ΔH=energy taken in to break bonds−energy released when bonds form\Delta H = \text{energy taken in to break bonds} - \text{energy released when bonds form}ΔH=energy taken in to break bonds−energy released when bonds form.
  5. Work through every calculation in the same order.
    1. Write the balanced equation and draw the displayed formula of every reactant and product, so that each bond can be seen.
    2. List every bond broken in the reactants, multiplying by the number of molecules shown in front of each formula.
    3. Add the bond energies to find the total energy taken in to break bonds.
    4. List every bond formed in the products in the same way, and add their bond energies to find the total energy released when bonds form.
    5. Subtract the bond-making total from the bond-breaking total, and give the answer with its sign and the unit kJ/mol\text{kJ/mol}kJ/mol.
  6. A negative answer shows an exothermic reaction, and a positive answer shows an endothermic reaction.
Example

Hydrogen reacting with chlorine

  • The equation is H-H+Cl-Cl→2 H-Cl\text{H-H} + \text{Cl-Cl} \rightarrow 2\,\text{H-Cl}H-H+Cl-Cl→2H-Cl, with bond energies of 436 kJ/mol436\ \text{kJ/mol}436 kJ/mol for H-H\text{H-H}H-H, 242 kJ/mol242\ \text{kJ/mol}242 kJ/mol for Cl-Cl\text{Cl-Cl}Cl-Cl and 431 kJ/mol431\ \text{kJ/mol}431 kJ/mol for H-Cl\text{H-Cl}H-Cl.
  • Bonds broken: one H-H\text{H-H}H-H bond and one Cl-Cl\text{Cl-Cl}Cl-Cl bond.
energy taken in=436+242=678 kJ/mol \text{energy taken in} = 436 + 242 = 678\ \text{kJ/mol} energy taken in=436+242=678 kJ/mol
  • Bonds formed: two H-Cl\text{H-Cl}H-Cl bonds, because the equation makes two molecules of hydrogen chloride.
energy released=2×431=862 kJ/mol \text{energy released} = 2 \times 431 = 862\ \text{kJ/mol} energy released=2×431=862 kJ/mol ΔH=678−862=−184 kJ/mol \Delta H = 678 - 862 = -184\ \text{kJ/mol} ΔH=678−862=−184 kJ/mol
  • The value is negative, so the reaction is exothermic.
Example

Combustion of methane

  • In CH4+2O2→CO2+2H2O\text{CH}_4 + 2\text{O}_2 \rightarrow \text{CO}_2 + 2\text{H}_2\text{O}CH4​+2O2​→CO2​+2H2​O, methane has four C-H\text{C-H}C-H bonds, each oxygen molecule has one O=O\text{O=O}O=O bond, carbon dioxide has two C=O\text{C=O}C=O bonds and each water molecule has two O-H\text{O-H}O-H bonds.
  • The bond energies used are C-H=413\text{C-H} = 413C-H=413, O=O=498\text{O=O} = 498O=O=498, C=O=805\text{C=O} = 805C=O=805 and O-H=463\text{O-H} = 463O-H=463, all in kJ/mol\text{kJ/mol}kJ/mol.
  • Bonds broken: four C-H\text{C-H}C-H bonds and two O=O\text{O=O}O=O bonds.
energy taken in=(4×413)+(2×498)=2648 kJ/mol \text{energy taken in} = (4 \times 413) + (2 \times 498) = 2648\ \text{kJ/mol} energy taken in=(4×413)+(2×498)=2648 kJ/mol
  • Bonds formed: two C=O\text{C=O}C=O bonds and four O-H\text{O-H}O-H bonds, because two water molecules each contain two O-H\text{O-H}O-H bonds.
energy released=(2×805)+(4×463)=3462 kJ/mol \text{energy released} = (2 \times 805) + (4 \times 463) = 3462\ \text{kJ/mol} energy released=(2×805)+(4×463)=3462 kJ/mol ΔH=2648−3462=−814 kJ/mol \Delta H = 2648 - 3462 = -814\ \text{kJ/mol} ΔH=2648−3462=−814 kJ/mol
  • The value is negative, so the combustion of methane is exothermic.
Example

Decomposition of hydrogen bromide

  • The equation is 2 H-Br→H-H+Br-Br2\,\text{H-Br} \rightarrow \text{H-H} + \text{Br-Br}2H-Br→H-H+Br-Br, with bond energies of 366 kJ/mol366\ \text{kJ/mol}366 kJ/mol for H-Br\text{H-Br}H-Br, 436 kJ/mol436\ \text{kJ/mol}436 kJ/mol for H-H\text{H-H}H-H and 193 kJ/mol193\ \text{kJ/mol}193 kJ/mol for Br-Br\text{Br-Br}Br-Br.
  • Bonds broken: two H-Br\text{H-Br}H-Br bonds.
energy taken in=2×366=732 kJ/mol \text{energy taken in} = 2 \times 366 = 732\ \text{kJ/mol} energy taken in=2×366=732 kJ/mol
  • Bonds formed: one H-H\text{H-H}H-H bond and one Br-Br\text{Br-Br}Br-Br bond.
energy released=436+193=629 kJ/mol \text{energy released} = 436 + 193 = 629\ \text{kJ/mol} energy released=436+193=629 kJ/mol ΔH=732−629=+103 kJ/mol \Delta H = 732 - 629 = +103\ \text{kJ/mol} ΔH=732−629=+103 kJ/mol
  • The value is positive, so the reaction is endothermic, because more energy is taken in to break the bonds than is released when the new bonds form.
Common Mistake
  • Do not forget the numbers in front of formulae, because two molecules of water contain four O-H\text{O-H}O-H bonds, not two.
  • Do not subtract the wrong way round, because only bonds broken minus bonds formed gives the correct sign.
  • Do not say that breaking bonds releases energy, because energy is always needed to break a bond.
  • Do not leave the sign off your final answer, because a value without a sign does not show whether the reaction is exothermic or endothermic.
Exam technique

Bond energy questions

  • Set out your working in three lines, giving the total for bonds broken, the total for bonds formed and the subtraction, because each line can earn credit even if a later step goes wrong.
  • To explain why a reaction is exothermic, make two points: bond breaking takes in energy and bond making releases energy, and more energy is released making bonds than is taken in breaking them.
  • For an endothermic reaction, keep the first point and reverse the second, so more energy is taken in breaking bonds than is released making them.
  • Finish every calculation with the sign and the unit, as in −184 kJ/mol-184\ \text{kJ/mol}−184 kJ/mol.
  • Sketch the displayed formulae before you count, because double bonds such as C=O\text{C=O}C=O and O=O\text{O=O}O=O have their own bond energies and are easy to miss.
Self review
  • State whether bond breaking is an endothermic or an exothermic process.
  • Explain, in terms of bond breaking and bond making, why a reaction is exothermic.
  • Write the expression used to calculate ΔH\Delta HΔH from bond energies.
  • State how many O-H\text{O-H}O-H bonds are formed when two molecules of water are made.
  • Calculate ΔH\Delta HΔH for N2+3H2→2NH3\text{N}_2 + 3\text{H}_2 \rightarrow 2\text{NH}_3N2​+3H2​→2NH3​, using N≡N=945\text{N}\equiv\text{N} = 945N≡N=945, H-H=436\text{H-H} = 436H-H=436 and N-H=391\text{N-H} = 391N-H=391, all in kJ/mol\text{kJ/mol}kJ/mol.

How was this guide?

Teach Genie

Review 5.1 Exothermic and endothermic reactions by teaching Genie

Teach it back in your own words, spot gaps, and remember it better.

Start teaching
Genie and Baby Genie

Lesson

Recap your knowledge with an interactive lesson

8 minute activity

Start lesson

Chemical reactions rearrange atoms by breaking old bonds and making new ones. In this topic, we focus on thermal energy transferred between the reacting chemicals and the surroundings.

An exothermic reaction transfers thermal energy to the surroundings, so the surroundings get warmer. An endothermic reaction takes in thermal energy from the surroundings, so the surroundings get cooler.

Say energy is transferred, not created or destroyed. The surroundings include the solution, beaker, thermometer and nearby air.

Flashcards

Remember key concepts with flashcards

23 flashcards

Practice flashcards

A reaction mixture warms from 21.0 °C to 28.5 °C. What type of reaction is it?

5.1 Exothermic and endothermic reactions Revision Guide

  1. IGCSE
  2. /Chemistry
  3. /5.1 Exothermic and endothermic reactions

Revision notes for CIE IGCSE Chemistry 5.1 Exothermic and endothermic reactions: explanations and worked examples on 5.1.1 Exothermic and endothermic reactions, 5.1.2 Enthalpy change and activation energy, and 5.1.3 Bond breaking, bond making and bond energies.

More revision guides