t/static/chunks/02e4aeow0fqxf.js?dpl=nogit-1786598392","/_next/static/chunks/0blz9apfr4807.js?dpl=nogit-1786598392","/_next/static/chunks/002sz6pqk45kk.js?dpl=nogit-1786598392","/_next/static/chunks/0uwjjc1-e_wua.js?dpl=nogit-1786598392","/_next/static/chunks/09.1~1uk2ndna.js?dpl=nogit-1786598392","/_next/static/chunks/04sn0~emq5~yr.js?dpl=nogit-1786598392","/_next/static/chunks/0mnzracfw5c6o.js?dpl=nogit-1786598392","/_next/static/chunks/13_2fuachvs34.js?dpl=nogit-1786598392","/_next/static/chunks/0tfk152l~2~.p.js?dpl=nogit-1786598392","/_next/static/chunks/0gauv99574ynn.js?dpl=nogit-1786598392","/_next/static/chunks/13.aqe_ljjvj8.js?dpl=nogit-1786598392","/_next/static/chunks/0-x7b6vq3r4ci.js?dpl=nogit-1786598392","/_next/static/chunks/0cq-2jrn8w1n4.js?dpl=nogit-1786598392","/_next/static/chunks/03jikcmq76b8i.js?dpl=nogit-1786598392","/_next/static/chunks/0bfrn_-c1wu4g.js?dpl=nogit-1786598392","/_next/static/chunks/09dwgl.suxnht.js?dpl=nogit-1786598392","/_next/static/chunks/0vwd41r9wn-63.js?dpl=nogit-1786598392","/_next/static/chunks/0d68m~w6gbwwg.js?dpl=nogit-1786598392","/_next/static/chunks/0.xaw05lj1ctg.js?dpl=nogit-1786598392","/_next/static/chunks/0usk1kgbs5.~l.js?dpl=nogit-1786598392","/_next/static/chunks/14mg4g4huzpxm.js?dpl=nogit-1786598392","/_next/static/chunks/0cnk8._pw941b.js?dpl=nogit-1786598392","/_next/static/chunks/16rg_4fc.tboh.js?dpl=nogit-1786598392","/_next/static/chunks/0shnmx3~iwjkl.js?dpl=nogit-1786598392","/_next/static/chunks/11i6s0y9zb9c9.js?dpl=nogit-1786598392","/_next/static/chunks/0fv.isp.n05qf.js?dpl=nogit-1786598392","/_next/static/chunks/0ujhy6-7_ou3-.js?dpl=nogit-1786598392","/_next/static/chunks/13mygzggk11lp.js?dpl=nogit-1786598392","/_next/static/chunks/0ydpymhcj7ae0.js?dpl=nogit-1786598392"],"TopicQuestionBank"] 3f:T40b,- Identifies measuring the mass ($m$) of the load using a balance or weighing scale, and the vertical distance ($h$) it is lifted using a metre ruler or tape measure B1 - Identifies measuring the time ($t$) taken for the lift using a stopwatch B1 - Identifies measuring the input current ($I$) and voltage ($V$) of each motor using an ammeter and voltmeter during the lift B1 - Expresses the formula for useful power output as $P_{\text{out}} = \frac{mgh}{t}$ (or equivalent energy calculation $W = mgh$ then $P = \frac{W}{t}$) M1 - Expresses the formula for electrical power input as $P_{\text{in}} = VI$ and calculates the efficiency as $\text{Efficiency} = \frac{P_{\text{out}}}{P_{\text{in}}} \times 100\%$ (or equivalent energy ratio) A1 - Explains how to ensure a fair and reliable comparison (e.g., using the same load and lift height for all motors as control variables, and repeating the experiment multiple times to find an average) C140:T57d,- Determines the total weight $W$ of the suspended load (either by multiplying the total mass $m$ of the block and slotted masses by $g = 9.8\text{ m/s}^2$, or by reading directly if the masses are pre-labeled with weights) and measures the pulling effort force $F$ using the Newton meter. B1 - Measures the vertical distance moved by the load ($h$) and the corresponding vertical distance moved by the free end of the rope ($d$) using the vertical metre ruler. B1 - Outlines a clear, step-by-step procedure: pulling the Newton meter at a steady, constant speed, recording the force $F$ while the load is in motion, and repeating the process for at least 5 different load weights by adding slotted masses. M1 - Calculates the useful work output of the system as $\text{Work Output} = W \times h$. A1 - Calculates the total work input of the system as $\text{Work Input} = F \times d$. A1 - Calculates the efficiency using the formula $\text{Efficiency} = \frac{\text{Work Output}}{\text{Work Input}} \times 100\% = \frac{W \times h}{F \times d} \times 100\%$ (or using the velocity ratio $VR = \frac{d}{h}$ to calculate $\text{Efficiency} = \frac{W}{F \times VR} \times 100\%$), and st

Power and efficiency

Question 3

Power and efficiency Questions

Power and efficiency

Question 3

Power and efficiency Questions